Strain prediction for critical positions of FPSO under different loading of stored oil using GAIFOA-BP neural network

FPSO (floating, production, storage and offloading) units are widely used in the offshore oil and gas industry. Generally, FPSOs have excellent oil storage capacity owing to their huge oil cargo holds. The volume and distribution of stored oil in the cargo holds influence the strain level of hull girder, especially at critical positions of FPSO. However, strain prediction using structural analysis tools is computationally expensive and time consuming. In this study, a prediction tool based on back-propagation (BP) neural network called GAIFOA-BP is proposed to predict the strain values of concerned positions of an FPSO model under different oil storage conditions. The GAIFOA-BP combines BP model and GAIFOA which is a combination of genetic algorithm (GA) and an improved fruit fly optimization algorithm (IFOA). Results from three benchmark tests show that the GAIFOA-BP model has a remarkable performance. Subsequently, a total of 81 sets of training data and 25 sets of testing data are obtained from experiment using fiber Bragg grating (FBG) sensors installed on the surface of an FPSO model. The numerical results show that the GAIFOA-BP is capable of predicting the strain values with higher accuracy as compared with other BP models. Finally, the reserved GAIFOA-BP model is utilized to predict the strain values under the inputs of a 10-day time series of volume and distribution of stored oil. The predicted strain results are further used to calculate the fatigue consumption of measurement points.     

基于多源数据的公交车能耗碳排放测算模型

公交车能耗碳排放强度与车辆、线路和驾驶员有显著相关关系，为精准刻画其能耗碳排放强度特征，整合OBD监测数据、加油(气)数据、运营排班数据等多源数据资源. OBD监测数据和加油(气)数据呈显著的线性关系，证明修正后的OBD监测数据可满足分析要求. 搭建“速度-能耗碳排放强度曲线”测算模型，幂函数关系的拟合优度R2 =0.972 6 为最高. 实证研究发现，平均速度在10~60 km/h 变化时，液化天然气(LNG)车比柴油车能耗碳排放强度高 3.3%~33.7%，双层车比铰接车高2.4%~13.3%；LNG铰接车在不同线路、相同速度下的强度相差9.6%；不同驾驶员在相同线路的能耗碳排放强度可相差24.2%. 模型为各城市基于多源数据开展公交能耗碳排放目标设定提供数据支撑.     

大跨度钢箱梁斜拉桥中跨合龙关键技术

以4座主跨超过400 m的钢箱梁斜拉桥中跨合龙控制为背景,对大跨度钢箱梁斜拉桥中跨合龙的2种方法进行对比分析,对合龙各主要工序的关键技术进行研究。提出了合龙段配切长度的计算公式和合龙口宽度连续观测的测点布置方式。建议:在调整好合龙口姿态后可不加压重,也可不采用临时劲性骨架锁定;采用无线采集设备采集合龙口结构的温度场,用激光测距仪测量合龙口宽度以提高观测效率和安全性;在悬臂施工阶段关注梁长累计误差并通过调整后续梁段的制造长度消除之。     

提高八钢专用铁路货运量的对策

优化调整货物运输结构、提高铁路发运占比是落实"蓝天保卫战"的一项具体举措。为了满足宝钢集团新疆八一钢铁有限公司生产规模的不断扩大、外运需求旺盛的实际,在对其铁路运输现状和需求,以及存在的线路质量较差、装卸效率较低、运输组织衔接弱等问题进行剖析的基础上,提出提高铁路货运量对策,即:推进路企直通战略合作、升级改造设备设施、构建调度全程统一指挥模式、优化货流源头组织,以加快调整运输结构,增加铁路货运量,推动铁路高质量发展。     

Evaluating sustainability of supply chains by two-stage range directional measure in the presence of negative data

Assessing sustainability of supply chains is a critical and increasingly complex problem. In recent years sustainability has received more attention in supply chain management (SCM) literature with triple bottom lines including social, environmental, and economic factors. Conventional data envelopment analysis (DEA) models consider decision making units (DMUs) as black boxes that consume a set of inputs to produce a set of outputs and do not take into consideration internal interactions of DMUs. Two-stage DEA models deal with such DMUs. However, existing two-stage DEA models are applicable only in technologies characterized by positive inputs/outputs. This paper aims to build and present a new two-stage DEA model considering negative input-intermediate-output data. Some numerical examples along with some theorems and properties are given to show capability of proposed method. The proposed ideas are used in a case study where 29 Iranian supply chains producing equipment of expendable medical devices are evaluated in terms of sustainability.     

How the environmental impact affects the design of logistics networks based on cost minimization

The degree of centralization of the logistics network is one of the important strategic decisions to take. This issue has often been studied but mainly from a cost minimization focus. This research studies the influence of incorporating the environmental impact in logistics network design models, comparing the results with those obtained considering cost minimization only. A fuzzy biobjective optimization model is used to carry out a number of experiments. By weighting the relative importance of the two objectives, the differences with respect to the base cost minimization solution can be ascertained. Our results show that in general more material is moved through warehouses when the environmental impact is considered and more decentralized facilities are opened.     

大城市中小学周边地区交通拥堵问题分析与解决策略

交通拥堵已经成为我国大城市的一种社会问题,它与每一个人都息息相关,如何更好地处理这种问题,使其减少对人们出行的影响,成为值得每一个人思考的问题。针对大中型城市中的交通拥堵其中的一种现象进行深入的剖析,系统介绍交通拥堵的成因,有针对性地提出如何改善中小学周边地区交通拥堵现象的一些观点和做法。     

浅谈沿海航行船舶应急演练存在的问题与改进措施

在日常船舶安全检查中,发现应急训练与演习存在一些问题,这些问题影响了船员应急反应能力的提升,带来了船舶安全隐患。根据国内航行货船应急训练与演习的要求,提出改进建议,旨在提高船员对应急训练与演习的认识,加强日常训练与演习,不断提升应急反应能力,以保障船舶和船员生命安全。     

Validation of an extended discrete first-order model with variable speed limits

This paper validates the prediction model embedded in a model predictive controller (MPC) of variable speed limits (VSLs). The MPC controller was designed based on an extended discrete first-order model with a triangular fundamental diagram. In our previous work, the extended discrete first-order model was designed to reproduce the capacity drop and the propagation of jam waves, and it was validated with reasonable accuracy without the presence of VSLs. As VSLs influence traffic dynamics, the dynamics including VSLs needs to be validated, before it can be applied as a prediction model in MPC. For conceptual illustrations, we use two synthetic examples to show how the model reproduces the key mechanisms of VSLs that are applied by existing VSL control approaches. Furthermore, the model is calibrated by use of real traffic data from Dutch freeway A12, where the field test of a speed limit control algorithm (SPECIALIST) was conducted. In the calibration, the original model is extended by using a quadrangular fundamental diagram which keeps the linear feature of the model and represents traffic states at the under-critical branch more accurately. The resulting model is validated using various traffic data sets. The accuracy of the model is compared with a second-order traffic flow model. The performance of two models is comparable: both models reproduce accurate results matching with real data. Flow errors of the calibration and validation are around 10%. The extended discrete first-order model-based MPC controller has been demonstrated to resolve freeway jam waves efficiently by synthetic cases. It has a higher computation speed comparing to the second-order model-based MPC.