宁波-舟山海域船舶接收MSI时的困难分析

海上安全信息(MSI)对船舶航行安全起到非常重要的作用,航行在宁波-舟山海域的船舶在接收上海海岸电台通过HF NBDP播发的MSI时,经常会遇到通信不良,接收信号很差的情况,尤其在夜晚。就这一现象利用无线电通信的有关知识进行了详细地分析,并在此基础上提出了有效的应对措施来改善接收效果,以期对航行在此海域的船舶在接收MSI时有所帮助。     

电控陀螺罗经改进

结合某型电控陀螺罗经在长期使用过程中存在的问题.详细介绍了该型电控陀螺罗经的改进方案,主要包括电源子系统、主罗经子系统、微机控制子系统三个部分.此项改造任务对于提高经济性和老设备的更新换代有积极的借鉴意义.     

船体结构腐蚀疲劳问题以及数值计算方法

船体或者内部高强脆性材料在腐蚀环境中的破坏问题已受广泛关注,其中涉及破坏机理的研究屡见报道,但相关的数值计算研究方法目前还屈指可数,文章在介绍各种破坏机理的基础上,从数值计算方法研究的角度阐述了最近几十年中的研究进展以及作者在该领域所取得的前沿性的成果,并指出了无网格有限元计算方法将在这个研究领域扮演重要角色.     

潜水器多学科设计中的多目标协同优化方法

针对潜水器设计中涉及多个学科的耦合以及数据信息量大、数据关系复杂的问题,文章介绍了一种新的多目标协同优化算法.该方法将Pareto遗传算法(PGA)引入协同优化框架,二者的有机结合充分发挥各自的优势,该方法利用协同方法的分解协调机制将复杂系统的设计问题分解为一个系统级优化问题和几个学科级优化问题.采用PGA作为系统级优化器,不仅可以得到能够反映多目标优化问题实质的、客观的Pareto解集,而且,由于PGA是无需梯度信息的直接搜索算法,从而从根本上消除了协同优化由系统层一致性约束条件引起的收敛困难问题.在PGA与协同优化框架结合的过程中,采用目标函数的归一化处理、分级罚函数法、浮点数编码、群体分级和Paveto解集过滤器等技术提高算法的计算效率和可靠性,并通过一个数学算例和一个载人潜水器的例子证明了多目标协同优化算法的有效性.     

基于遗传算法优化的小波神经网络对船舶受扰力及力矩建模预报

首先构造小波神经网络,建立船舶横向和纵向运动模型及其运动受扰力模型,采用小波神经网络对船舶受扰力建模预报,并用遗传算法对其进行优化,对预报结果进行分析比较,给出超前5秒、15秒的船舶运动受扰力与力矩预报结果.     

光滑质点流体动力学(SPH)及其算法特性

基于Lagrange观点的无网格方法计算是建立在一群可移动的自适应性的质点基础之上,对特大变形区域和自由表面的捕捉有着较高的精度.光滑质点流体动力学(SPH)是无网格方法的一种,本文阐述其理论基础和计算方法,主要包括:SPH的基本概念、核近似和粒子近似的基本原理,核函数的构造方法、SPH形式的流体运动方程、边界处理方法和数值算例等多方面内容.研究工作在了解SPH方法的理论特点和潜在优势的同时,也为相关问题的深入研究和改进奠定了理论和算法基础.     

跨坐式单轨交通预应力钢筋混凝土轨道梁动力性能试验与分析

对重庆跨坐式单轨交通的预应力钢筋混凝土轨道梁、墩体结构进行了动力试验,测试其动力特性及在不同行车速度下的动力响应.测试及分析结果表明,预应力钢筋混凝土轨道梁结构实测自振特性与理论计算结果基本相符;轨道梁结构具有较好的竖向刚度和结构强度;单轨车辆以不同速度通过桥梁时,试验梁横向基频、横向加速度等横向振动性能与<铁路桥梁检定规范>的要求有一定差异;运行单轨车辆对轨道梁结构有一定的冲击作用,但不显著;墩体结构横向动力性能良好,满足限值要求.     

开发国产300 km/h以上速度动车组的设想

讨论了CRH系列动车组消化吸收再创新的总体目标与主要思路。提出了国产300km/h以上速度动车组的技术创新总体方案的初步设想和技术路线,以及需要研究解决和完成的主要任务、具体内容与所要达到的技术指标。     

Development of an LIF image processing technique for measuring drop sizes in a pre-swirl spray

Depth of field effects in laser sheet imaging were considered for droplet sizing of a pre-swirl spray. A pre-swirl spray is formed before the hollow-cone type main-swirl spray from a D.I. gasoline injector, and shows transient characteristics with high axial velocity. A microscopic imaging technique was applied to obtain high spatial resolution LIF tomograms of the pre-swirl spray. A 1 mm thick Nd:YAG laser sheet was used as a light source to make the LIF tomograms that were imaged using a high-resolution CCD camera. The droplet sizing of the pre-swirl spray was carried out using an image processing technique. In the image processing procedure, the laser sheet-straddling large-sized droplets were carefully taken into account to remove the errors caused by the depth of field effects from the limited thickness and the energy distribution of the laser sheet. The mean intensity of the individual droplets and the line profile of the LIF signal around the droplet edge were inspected to screen the laser sheet-straddling large-sized droplets. In order to consider the effects of the size-dependent LIF signal intensity, the size-classified or ensemble-averaged mean intensity of the individual droplets was introduced. The mean droplet sizes such as AMD and SMD were calculated using only screened droplets, and they slightly increase before considering the depth of field effects.     

Comparison of HC species from diesel combustion modes and characterization of a heat-up doc formulation

This study summarizes engine speed and load effects on HC species emissions from premixed charge compression ignition (PCI) and conventional diesel combustion, and it evaluates diesel oxidation catalyst (DOC) formulations on a gas flow reactor for the purpose of diesel particulate filter regeneration or lean NO_x trap desulfation. HC emissions are sampled simultaneously by a Tedlar bag for light HC species and by a Tenax TA™ adsorption trap for semi-volatile HC species, and they are analyzed by gas chromatography with a flame ionization detector. The bulk temperature and residence time during combustion are key parameters that are important for understanding the effects of speed and load on engine-out HC emissions. The degree of post-flame oxidation is higher in PCI than in conventional combustion, and it is increased for PCI with a higher speed and load, as indicated by a lower fuel alkanes/THC ratio, a higher alkenes/fuel alkanes ratio, and a higher methane/THC ratio. Ethene and n-undecane are two representative HC species, and they are used as a surrogate mixture in the gas flow reactor to simulate PCI and conventional combustion with in-cylinder post fuel injection. Among the three DOC formulations tested, the catalyst with constituent precious metals of platinum and palladium (PtPd) showed the best light-off performance, followed by PtPd with an addition of cerium dioxide (PtPd+CeO₂), and platinum (Pt), regardless of exhaust compositions. Conventional combustion exhaust composition shows a lower light-off temperature than that of PCI, regardless of catalyst formulation.