长大货物车适应THDS轴温探测技术的研究

针对不适应THDS轴温探测系统的长大货物车,分析论证了现车轴箱改进方案适应THDS轴温探测的不足,并提出了轴箱优化方案。经计算、试验和装车验证表明,新轴箱可行、有效、安全,满足THDS轴温探测要求,保证了长大货物车运输安全。     

Dynamic simulation of train–truck collision at level crossings

Trains crashing onto heavy road vehicles stuck across rail tracks are more likely occurrences at level crossings due to ongoing increase in the registration of heavy vehicles and these long heavy vehicles getting caught in traffic after partly crossing the boom gate; these incidents lead to significant financial losses and societal costs. This paper presents an investigation of the dynamic responses of trains under frontal collision on road trucks obliquely stuck on rail tracks at level crossings. This study builds a nonlinear three-dimensional multi-body dynamic model of a passenger train colliding with an obliquely stuck road truck on a ballasted track. The model is first benchmarked against several train dynamics packages and its predictions of the dynamic response and derailment potential are shown rational. A geometry-based derailment assessment criterion is applied to evaluate the derailment behaviour of the frontal obliquely impacted trains under different conditions. Sensitivities of several key influencing parameters, such as the train impact speed, the truck mass, the friction at truck tyres, the train–truck impact angle, the contact friction at the collision zone, the wheel/rail friction and the train suspension are reported.     

国内垃圾车车载称重系统分析

随着城市环境意识的提高,根据智慧环卫的城市发展需求以及计量收费的政策要求,对我国垃圾车车载称重功能提出了更高的要求,本文分析了国内三类垃圾车车载称重系统的运行结构及原理,并对国内垃圾车车载称重系统提出了设计建议.     

高顶双卧重型卡车改装设计

论述了汽车改装业的现状和发展趋势,详细介绍了东风EQ1411型高顶双卧重型卡车车身改装设计的原则、过程和特点。     

Failure mode and effects analysis of dual levelling valve airspring suspensions on truck dynamics

Failure mode and effects analysis are performed for a dual levelling valve pneumatic suspension to determine the effect of suspension failure on tractor–semi-trailer dynamics, using a detailed model of suspension pneumatics coupled with a truck dynamic model. A key element of failure analysis in suspensions with one or two levelling valves is determining the effect on the vehicle body roll when one or more failures occur. The failure modes considered are mainly the suspension pneumatic components, including clogged levelling valve, bent control rod, disabled lever arm, and punctured or leaking connectors and pipes. The pneumatic suspension is modelled in AMESim, with critical parameters established through component testing. Upon validating the AMESim component model experimentally, the pneumatic suspension model is integrated into TruckSim for studying the consequences of suspension failure on truck dynamics. The simulation results indicate that the second levelling valve in a dual-valve arrangement brings a certain amount of failure redundancy to the system, in the sense that when one side fails, the other side can compensate for the failure. Equipping the trailer with dual levelling valves brings an additional stabilising effect to the vehicle in the event of tractor suspension failure.     

重型汽车低附着路面制动稳定性的仿真研究

文章利用trucksim重型汽车动力学仿真软件,对六轮双轴重型汽车在低附着路面左右车轮附着系数不一致情况下进行紧急制动的行驶工况进行了仿真研究。研究结果表明在低附着路面进行紧急制动时,对制动轮进行制动压力控制,有ABS控制的重型汽车比没有ABS控制的重型汽车具有更好地行驶稳定性。但在低附着路面上,有ABS控制的重型汽车比没有ABS控制的重型汽车的制动距离增加了很多,这对重型汽车的行车安全性非常不利。     

新型集装箱汽车衡称重技术与误差分析研究

为了对一辆集卡装载的2个20英尺集装箱进行分别称重,设计了新的汽车衡结构,推导出计算公式并进行实验验证,得到了一种可以保证作业安全且能为港口和货主接受的集装箱汽车衡称重方法。     

轻型高速船用齿轮箱发展现状研究

轻型高速船用齿轮箱的发展对于我国船舶工业的发展起着重要作用。本文以造船完工量及游艇市场未来产业规模预测为数据基础,分析发展轻型高速船用齿轮箱的重要性。文章通过研究国内外轻型高速齿轮箱发展现状,总结其发展趋势。分析我国轻型高速船用齿轮箱发展中主要问题,并提出相应的措施,为我国在轻型高速齿轮箱发展提供研究基础。     

Cost-effectiveness of reductions in greenhouse gas emissions from High-Speed Rail and urban transportation projects in California

A rising trend in state and federal transportation finance is to invest capital dollars into projects which reduce greenhouse gas (GHG) emissions. However, a key metric for comparing projects, the cost-effectiveness of GHG emissions reductions, is highly dependent on the cost-benefit methodology employed in the analysis. Our analysis comparing California High-Speed Rail and three urban transportation projects shows how four different accounting framings bring wide variations in cost per metric tonne of GHG emissions reduced. In our analysis, life-cycle GHG emissions are joined with full cost accounting to better understand the benefits of cap-and-trade investments. Considering only public subsidy for capital, none of the projects appear to be a cost-effective means to reduce GHG emissions (i.e., relative to the current price of GHG emissions in California’s cap-and-trade program at $12.21 per tonne). However, after adjusting for the change in private costs users incur when switching from the counterfactual mode (automobile or aircraft) to the mode enabled by the project, all investments appear to reduce GHG emissions at a net savings to the public. Policy and decision-makers who consider only the capital cost of new transportation projects can be expected to incorrectly assess alternatives and indirect benefits (i.e., how travelers adapt to the new mass transit alternative) should be included in decision-making processes.     

高职院校引入“校检合作”模式预防职务犯罪探析

纪委受同级党委领导的先天局限性,加上人员编制配备和机构设置的不尽合理,而近年来高职院校职务犯罪问题日益突出,使高职院校纪检部门与检察机关合作预防职务犯罪成为迫切需要。检察机关通过共享自有资源、提出有针对性的司法建议、建立行贿犯罪档案查询系统、协助培训、协助侦查等方式帮助高职院校纪委预防和打击职务犯罪,高职院校通过发挥自身资源优势,为检查机关提供研究服务。