Interaction of vehicle and steering system regarding on-centre handling

For the on-centre handling behaviour of vehicles the steering system is absolutely important. To investigate the interaction of the vehicle and steering system a validated, especially tailored simulation model was developed. Some meaningful vehicle and steering system parameters are altered to show the influence on steering wheel torque, steering feel and understeer. The results underline the importance of an accurate steering system model. Identified measures to improve the centre feel and steering response were a stiffer torsion bar, a higher cornering stiffness or a lower overall steering ratio. The steering response, however, suffers when the centre feel is improved by a higher trail. The steering rack friction reduces mainly the steering response while the steering column friction decreases the centre feel whereas a stiffer torsion bar lessens the understeer tendency.     

CW-200K型和CW-2型转向架动力学性能比较浅析

介绍了CW—200K型无摇枕转向架和CW—2型转向架在结构和动力学方面的差异,着重阐述了其平稳性不同的原因及对策。     

计算高速列车车内压力的热力学模型

运用热力学基础知识，建立了一种计算高速列车通过隧道时车内压力变化的热力学模型，它采用当量漏气面积表示车辆气密性，具有物理意义明确的特点。在相同的计算条件下，将其与现有能够计算车内压力的2种模型——经验模型和流动模型进行了车内压力计算的对比分析，结果表明热力学模型用于高速列车车内压力计算是可行的。     

Co-simulation and experimental study for wingspan of flapping wing micro aerial vehicle

The 3D model of flapping wing mechanism and veins is constructed in 3D computer aided design (CAD) software UG. Then the co-simulation model is established by using multibody dynamics software ADAMS and MATLAB. The validation of this co-simulation model is verified by comparing the simulation results with final experiments. The simulation results and experiments reveal that the relation between flapping frequency and driving voltage of motor is approximately linear under various wingspans. The variance of flapping frequency among different wingspans augments gradually with increasing voltage. Furthermore, the simulation results sug-gest that flapping frequency is sensitive to wingspan and decreases with increasing wingspan of veins, and the relation between flapping frequency and moment of inertia of veins is also approximately linear for various volt-ages.     

Effects of the guideway's vibrational characteristics on the dynamics of a Maglev vehicle

The levitation control system in an electromagnetically levitated vehicle controls the voltage in its winding to maintain the air gap, which is the clearance between the electromagnet and the guideway, within an allowable range of variation, while strongly interacting with the flexible guideway. Thus, the vibrational characteristics of the guideway play an important role in the dynamics of Maglev (magnetically levitated) vehicles that utilise an active electromagnetic suspension system. In this study, the effects of the guideway's vibrational characteristics, such as natural frequency and damping, on the dynamics of the Maglev vehicle UTM-02 are numerically and experimentally analysed. From these analyses, the coupled equations of motion of the simplified vehicle–guideway model with three degrees of freedom are derived. Eigenvalues are calculated and frequency response analysis is also performed, in order to obtain a clear understanding of the dynamic characteristics resulting from the guideway's vibrational characteristics. To verify the numerical results, air gap tests of the urban Maglev vehicle UTM-02 are also carried out. These results lead us to recommend that the natural frequency of the guideway be decreased by increasing mass density rather than by decreasing rigidity, and that its damping ratio be increased in the Maglev vehicle UTM-02 employing a five-state feedback control law as a levitation control law.     

A review of dynamics modelling of friction wedge suspensions

Three-piece bogies with friction wedge suspensions are the most widely used bogies in heavy haul trains. Fiction wedge suspensions play a key role in these wagon systems. This article reviews current techniques in dynamic modelling of friction wedge suspension with various motivations: to improve dynamic models of friction wedge suspensions so as to improve general wagon dynamics simulations; to seek better friction wedge suspension models for wagon stability assessments in complex train systems; to improve the modelling of other friction devices, such as friction draft gear. Relevant theories and friction wedge suspension models developed by using commercial simulation packages and in-house simulation packages are reviewed.     

A polynomial chaos approach to the analysis of vehicle dynamics under uncertainty

The ability of ground vehicles to quickly and accurately analyse their dynamic response to a given input is critical to their safety and efficient autonomous operation. In field conditions, significant uncertainty is associated with terrain and/or vehicle parameter estimates, and this uncertainty must be considered in the analysis of vehicle motion dynamics. Here, polynomial chaos approaches that explicitly consider parametric uncertainty during modelling of vehicle dynamics are presented. They are shown to be computationally more efficient than the standard Monte Carlo scheme, and experimental results compared with the simulation results performed on ANVEL (a vehicle simulator) indicate that the method can be utilised for efficient and accurate prediction of vehicle motion in realistic scenarios.     

Estimation of wheel–rail friction for vehicle certification

In certification of new rail vehicles with respect to running characteristics, a wide variety of operating conditions needs to be considered. However, in associated test runs the wheel–rail friction condition is difficult to handle because the friction coefficient needs to be fairly high and the friction is also generally hard to assess. This is an issue that has been studied in the European project DynoTRAIN and part of the results is presented in this paper. More specifically, an algorithm for estimating the wheel–rail friction coefficient at vehicle certification tests is proposed. Owing to lack of some measurement results, the algorithm here is evaluated in a simulation environment which is also an important step towards practical implementation. A quality measure of the friction estimate is suggested in terms of estimated wheel–rail spin and total creep. It is concluded that, tentatively, the total creep should exceed 0.006 and the spin should be less than 1.0 m^?1 for the algorithm to give a good friction estimate. Sensitivity analysis is carried out to imitate measurement errors, but should be expanded in further work.     

Variability of the western Galician upwelling system (NW Spain) during an intensively sampled annual cycle. An EOF analysis approach

The key features of the western Galician shelf hydrography and dynamics are analyzed on a solid statistical and experimental basis. The results allowed us to gather together information dispersed in previous oceanographic works of the region. Empirical orthogonal functions analysis and a canonical correlation analysis were applied to a high-resolution dataset collected from 47 surveys done on a weekly frequency from May 2001 to May 2002. The main results of these analyses are summarized bellow. Salinity, temperature and the meridional component of the residual current are correlated with the relevant local forcings (the meridional coastal wind component and the continental run-off) and with a remote forcing (the meridional temperature gradient at latitude 37°N). About 80% of the salinity and temperature total variability over the shelf, and 37% of the residual meridional current total variability are explained by two EOFs for each variable. Up to 22% of the temperature total variability and 14% of the residual meridional current total variability is devoted to the set up of cross-shore gradients of the thermohaline properties caused by the wind-induced Ekman transport. Up to 11% and 10%, respectively, is related to the variability of the meridional temperature gradient at the Western Iberian Winter Front. About 30% of the temperature total variability can be explained by the development and erosion of the seasonal thermocline and by the seasonal variability of the thermohaline properties of the central waters. This thermocline presented unexpected low salinity values due to the trapping during spring and summer of the high continental inputs from the River Miño recorded in 2001. The low salinity plumes can be traced on the Galician shelf during almost all the annual cycle; they tend to be extended throughout the entire water column under downwelling conditions and concentrate in the surface layer when upwelling favourable winds blow. Our evidences point to the meridional temperature gradient acting as an important controlling factor of the central waters thermohaline properties and in the development and decay of the Iberian Poleward Current.     

Tyre-force estimation by Kalman inverse filtering: applications to off-highway mining trucks

Kalman inverse filtering is used to develop a methodology for real-time estimation of forces acting at the interface between tyre and road on large off-highway mining trucks. The system model formulated is capable of estimating the three components of tyre-force at each wheel of the truck using a practical set of measurements and inputs. Good tracking is obtained by the estimated tyre-forces when compared with those simulated by an ADAMS virtual-truck model. A sensitivity analysis determines the susceptibility of the tyre-force estimates to uncertainties in the truck’s parameters.