A study on flow field around full ship forms in maneuvering motion

To estimate the maneuvering ability of a ship, an accurate estimation of the hydrodynamic forces and moment acting on the ship's hull is indispensable. For the purpose of developing a numerical method of computing the viscous flow field around a hull and evaluating its validity, the hydrodynamic pressure on the hull and the velocity field were measured. Two full ship models with different hull forms in the aft part were used for the experiment. From the results of pressure measurements, the distribution of hydrodynamic lateral forces was obtained. The simulation method is a numerical solution of the Navier-Stokes equation based on a finitevolume method and applied to the maneuvering motion. The measured and computed results agree qualitatively well, and the method is a valuable tool for estimating the maneuvering ability of a ship. The typical characteristics of the flow field in the steady turning condition are revealed by the numerical simulation, and the mechanism of the relations between hull form, flow field, and hydrodynamic forces are clarified.Translation and combination of articles that appeared in the Journal of the Society of Naval Architects of Japan, vols. 176, 177, 179 (1994–1996): The original article won the SNAJ prize, which is awarded annually to the best papers selected from the SNAJ Journal, JMST, or other quality journals in the field of naval architecture and ocean engineering.This work was conducted as part of the joint SR221 project supported by JSRA (Shipbuilding Research Association of Japan). The authors express their sincere gratitude to the persons concerned, and especially to M. Kanai, S. Eguchi, S. Usami, K. Tatsumi, and T. Kawamura.     

NETWORK MODEL OF VAPOR-LIQUID TWO-PHASE FLOW

TX＠姚伟＠徐济济＠郭方中ＩｎｔｒｏｄｕｃｔｉｏｎＢｏｉｌｉｎｇｐｈｅｎｏｍｅｎｏｎ，ａｓａｎｅｆｅｃｔｉｖｅｈｅａｔｅｘ－ｃｈａｎｇｅｍｏｄｅ，ｅｘｉｓｔｓｉｎｍａｎｙｔｈｅｒｍａｌｅｑｕｉｐ－ｍｅｎｔ．Ｔｗｏ－ｐｈａｓｅｆｌｏｗｉｎａｂｏｉｌｉｎｇｃｈａ...     

轮胎制动力—滑移率特性的动态模型研究

轮胎制动力及滑移率对制动力矩的响应存在着显著的低频衰减振荡现象，这从制动力－滑移率特性曲线上看，表现为一系列的以稳态点为中心的旋涡状过渡曲线。这是稳态的轮胎模型所不能描述的。本文在稳态ｂｒｕｓｈ轮胎模型基础上，通过印迹前端蹼处胎冠一阶变形模型，建立了轮胎制动力－滑移率的动态模型，并根据转鼓试验台上的轮胎制动试验，验证了该模型的仿真效果。     

Optimization of curving performance of rail vehicles

The curving performance of a transit rail vehicle model with 21 degrees of freedom is optimized using a combination of multibody dynamics and a genetic algorithm (GA). The design optimization is to search for optimal design variables so that the noise or wear, arising from misalignment of the wheelsets with the track, is reduced to a minimum level during curve negotiations with flange contact forces guiding the rail vehicle. The objective function is a weighted combination of angle of attack on wheelsets and ratios of lateral to vertical forces on wheels. Using the combination of the GA and a multibody dynamics modelling program, A'GEM, the generation of governing equations of motion for complex nonlinear dynamic rail vehicle models and the search for global optimal design variables can be carried out automatically. To demonstrate the feasibility and efficacy of the proposed approach of using the combination of multibody dynamics and GAs, the numerical simulation results of the optimization are offered, the selected objective function is justified, and the sensitivity analysis of different design parameters and different design parameter sets on curving performance is performed. Numerical results show that compared with suspension and inertial parameter sets, the geometric parameter set has the most significant effect on curving performance.     

对教学秘书的"横向"与"纵向"协调功能的认识

教学秘书是教学管理和协调的重要环节,同时也是处于教学各种资源整合的最前沿。因此,该环节的作用能否得到充分的发挥和利用,影响到教学管理的质量和趋势。本文试从教学秘书所涉及的“横向”与“纵向”两个不同的角度和线路,结合自己几年来的工作实际和体会,对教学秘书的在教学资源整合、协调与发挥资源的最大优势方面作了一些分析和思考。     

电磁型磁悬浮列车动力学研究综述

在综合分析各国电磁型磁悬浮列车的发展现状和及其动力学研究的基础上，考虑车辆和轨道的相互作用，将悬浮列车和轨道作为一个整体，就电磁力、转向架、轨道变形和控制动力学稳定性分析等方面的问题，提出了今后研究的方向。     

A nonlinear model for top fuel dragster dynamic performance assessment

The top fuel dragster is the fastest and quickest vehicle in drag racing. This vehicle is capable of travelling a quarter mile in less than 4.5 s, reaching a final speed in excess of 330 miles per hour. The average power delivered by its engine exceeds 7000 Hp. To analyse and eventually increase the performance of a top fuel dragster, a dynamic model of the vehicle is developed. Longitudinal, vertical, and pitching chassis motions are considered, as well as drive-train dynamics. The aerodynamics of the vehicle, the engine characteristics, and the force due to the combustion gases are incorporated into the model. Further, a simplified model of the traction characteristics of the rear tyres is developed where the traction is calculated as a function of the slip ratio and the velocity. The resulting nonlinear, coupled differential equations of motion are solved using a fourth-order Runge–Kutta numerical integration scheme. Several simulation runs are made to investigate the effects of the aerodynamics and of the engine's initial torque in the performance of the vehicle. The results of the computational simulations are scrutinised by comparisons with data from actual dragster races. Ultimately, the proposed dynamic model of the dragster can be used to improve the aerodynamics, the engine and clutch set-ups of the vehicle, and possibly facilitate the redesign of the dragster.     

The Dynamics of a Railway Freight Wagon Wheelset With Dry Friction Damping

Summary We investigate the dynamics of a simple model of a wheelset that supports one end of a railway freight wagon by springs with linear characteristics and dry friction dampers. The wagon runs on an ideal, straight and level track with constant speed. The lateral dynamics in dependence on the speed is examined. We have included stick-slip and hysteresis in our model of the dry friction and assume that Coulomb's law holds during the slip phase. It is found that the action of dry friction completely changes the bifurcation diagram, and that the longitudinal component of the dry friction damping forces destabilizes the wagon.     

Development and validation of a Kalman filter-based model for vehicle slip angle estimation

It is well known that vehicle slip angle is one of the most difficult parameters to measure on a vehicle during testing or racing activities. Moreover, the appropriate sensor is very expensive and it is often difficult to fit to a car, especially on race cars. We propose here a strategy to eliminate the need for this sensor by using a mathematical tool which gives a good estimation of the vehicle slip angle. A single-track car model, coupled with an extended Kalman filter, was used in order to achieve the result. Moreover, a tuning procedure is proposed that takes into consideration both nonlinear and saturation characteristics typical of vehicle lateral dynamics. The effectiveness of the proposed algorithm has been proven by both simulation results and real-world data.     

Curving performance simulation of an EMS-type Maglev vehicle

For electromagnetic suspension (EMS) type urban Maglev vehicles using a U-shaped electromagnet, the levitation and guidance forces are generated by only one electromagnet. Although the levitation force is actively controlled by changing the voltage of the electromagnet, the guidance force is passively determined by the levitation force. In addition, the curve negotiation performance of EMS-type urban Maglev vehicles using a U-shaped electromagnet must be considered, because an urban guideway may have some curves with shorter radii. It is, therefore, necessary to predict the curving performance with the greatest accuracy possible, in order to improve electromagnetic suspension and establish guideway design specifications. The objective is to establish a new dynamic modelling technique, so as to achieve more realistic curving simulation and thus to more accurately evaluate the curving performance of an EMS-type Maglev vehicle. The use of a full vehicle multibody dynamic model is proposed, and is applied to the evaluation of curving performance. Design changes are also investigated to obtain the bogie design directions for minimising variation in the lateral air gap, which is a criterion for curving performance.