全垫升气垫船航行安全特性分析及思考

针对全垫升气垫船在航行中易产生侧漂、甩尾、低头埋首、甚至大幅横倾等危险进行航行特性分析,提出了建立航行稳定的边界与安全驾控的措施,并针对气垫船大型化发展,提出从围裙技术、驾控技术等方面开展深入研究,采取必要措施,提高气垫船的使用安全性。具有一定指导价值。     

大型全垫升气垫船设计初探

通过对全垫升气垫船气垫参数、动力系统、围裙系统、横稳性和操纵性等方面进行分析,对大型全垫升气垫船的设计进行初步的探索。     

气泡动力学数值模型的稳定性研究

基于势流假设,建立气泡动力学数值模型,并开发计算程序.系统地分析了不同模型、不同单元类型的计算精度,以及网格划分、时间步等因素对计算结果的影响,验证了本文数值模型的收敛性,并在计算过程中分析了动能、势能及总能量随时间的变化.为考核文中建立的气泡动力学计算模型的有效性,分别将轴对称模型及三维模型与Rayleigh-Plesset气泡模型的精确解及实验数据、实验照片进行了对比分析,分析表明,计算结果与Rayleigh-Plesset模型及实验数据吻合很好,表明文中建立的计算模型是可行的、有效的.并分析了气泡在重力场中的运动特性.     

Desired yaw rate and steering control method during cornering for a six-wheeled vehicle

This paper proposes a steering control method based on optimal control theory to improve the maneuverability of a six-wheeled vehicle during cornering. The six-wheeled vehicle is believed to have better performance than a four-wheeled vehicle in terms of its capability for crossing obstacles, off-road maneuvering and fail-safe handling when one or two of the tires are punctured. Although many methods to improve the four-wheeled vehicle’s lateral stability have been studied and developed, there have only been a few studies on the six-wheeled vehicle’s lateral stability. Some studies of the six-wheeled vehicle have been reported recently, but they are related to the desired yaw rate of a four-wheeled vehicle to control the six-wheeled vehicle’s maneuvering during corning. In this paper, the sideslip angle and yaw rate are controlled to improve the maneuverability during cornering by independent control of the steering angles of the six wheels. The desired yaw rate that is suitable for a six-wheeled vehicle is proposed as a control target. In addition, a scaled-down vehicle with six drive motors and six steering motors that can be controlled independently is designed. The performance of the proposed control methods is verified using a full model vehicle simulation and scaled-down vehicle experiment.     

Effect of fuel stratification on initial flame development: Part 2-low swirl condition

This paper is the second invstigation on the effect of fuel stratification on flame propagation. In the previous work, the characteristics under the no port-generated swirl condition, i.e., the conventional case was studied. In this work, the flame development under the low swirl condition was considered. For this purpose, the initial flame development and propagation were visualized under different axially stratified states in a modified optical single cylinder SI engine. The images were captured by an intensified CCD camera through the quartz window mounted in the piston. Stratification was controlled by the combination of the port swirl ratio and injection timing. These were averaged and processed to characterize the flame propagation. The flame stability was estimated by the weighted average of flame area and luminosity. The stability was also evaluated through the standard deviation of flame area and propagation distance and through the mean absolute deviation of the propagating direction. The results show that the flame-flow interaction determines the direction of flame propagation and that the governing roles of the two factors vary according to the stratified state and the location in the cylinder. In addition, the flame development and the initial flame stability are strongly dependent on the stratified conditions, and the initial flame stability is closely related to the engine stability and lean misfire limit. Lastly, there is no essential difference in gasoline and CNG flame propagation characteristics.     

煤系地层公路高切坡稳定性评价

在山区修建公路不可避免地需要进行高切深挖,往往会形成大量的高切坡,边坡岩体原有应力平衡被打破,为高切坡的失稳创造了地质条件。以两巫公路(巫山及巫溪)K 90+310~K 90+370段煤系高切坡为研究对象,利用赤平极射投影法、有限元ANSYS法对高切坡整体和局部稳定性做出了评价。研究表明,坡体主控结构面对岩质高切坡的整体稳定性起控制作用;煤夹层对岩质高切坡的局部稳定性起控制作用。建议采用锚杆喷射混凝土-挂网来加固坡体整体,用锚索-格构梁和劈裂注浆联合法来加固坡体局部。     

考虑结构面黏聚力损伤变化的洞室块体稳定分析

为研究隧道开挖过程中临空面块体的稳定情况,进一步探究在其结构面具有胶结强度情况下块体的稳定性,运用黏聚力模型模拟具有填充和胶结的结构面的抗拉强度和黏聚强度,以及相应的滑移和脱开行为。选取甘肃北山某典型花岗岩研究区域搜索出的块体,以及获得的结构面参数区间,分4种方案研究块体的稳定性,同时考虑初始地应力、开挖诱导的二次地应力等因素的影响。方案1赋予抗拉强度和黏聚强度一个很小的数值,从而可以分析块体仅受结构面摩擦应力影响下的稳定性;方案2、3、4分别考虑不同位置的块体可能的失稳情况,通过调整不同块体结构面的抗拉强度和黏聚强度,分析块体稳定性。分析结果表明： 黏聚力模型能较好地模拟具有填充和胶结的结构面的抗拉强度和黏聚强度,并且能模拟结构面的滑移和脱开行为,可作为块体稳定性分析计算的工具;此外,也为模拟胶结结构面损伤随时间的渐进性发展提供一个新思路。     

Field measurements of the evolution of wheel wear and vehicle dynamics for high-speed trains

This investigation demonstrates the wheel wear evolution and related vehicle dynamics of high-speed trains with an operating distance (OD) of around two million kilometres. A long-term experimental test lasting two years was conducted to record the wheel profiles and structural vibrations of various trainsets. The wheel wear, namely the profile shape, worn distribution and wheelset conicity, is investigated for several continuous reprofiling cycles. Typical results are illustrated for the stability analysis, and the ride quality is examined with increasing OD. In addition, the vibration transition characteristics between suspensions are investigated in both the time and frequency domains. The experiments show that the dominant wear concentrates on the nominal rolling radius, and the wear rate increases with OD because of the surface softening resulting from the loss of wheel material. The vibration of structural components is aggravated by the increase of the equivalent conicity of the wheelset, which rises approximately linearly with the wheel wear and OD. High-frequency vibrations arise in the bogie and car body related to the track arrangement and wheel out-of-roundness, causing the ride comfort to worsen significantly. Additionally, the system vibration characteristics are strongly dependent on the atmospheric temperature. Summaries and conclusions are obtained regarding the wheel wear and related vehicle dynamics of high-speed trains over long operating times and distances.     

郑万高铁大断面岩质隧道掌子面稳定性评价及控制措施

为建立施工阶段大断面隧道掌子面稳定性评价方法,结合郑万高铁大型机械化特点,对郑万高铁湖北段隧道掌子面地质信息进行统计分析,将掌子面稳定性分为A整体稳定、B局部掉块、C上半断面不稳定和D全断面不稳定4个级别,并建立以岩石坚硬程度、岩体完整程度和地下水状态3个指标的掌子面稳定性定性分级方法,得出围岩级别与掌子面稳定性的对应关系。研究结果表明： 1）岩石坚硬程度、岩体完整程度和地下水状态是围岩分级指标中使用率最高的3个指标; 2）Ⅰ、Ⅱ、Ⅲ级围岩的掌子面稳定性为A级。