大跨度双线铁路混凝土桥极限跨径的研究

混凝土桥是我国大跨度铁路桥梁广泛应用的结构形式,但长期以来缺少对不同桥型跨越能力和适用范围的系统研究。大跨度混凝土桥的设计实践表明,支点截面混凝土的抗剪通常是控制其跨越能力的主要因素,以荷载作用下的剪应力达到混凝土容许剪应力为标准,分析得到了双线预应力混凝土连续梁(刚构)桥的理论极限跨径。在此基础上,通过分析主梁与加劲拱、拉索的荷载分配关系,进一步研究得到了连续梁(刚构)-拱桥、部分斜拉桥的理论极限跨径,分析结论与实际工程基本相符。同时在理论值基础上,结合设计经验给出工程实用极限跨径的建议值,对大跨度混凝土桥的桥式方案选择和投资控制具有一定价值。     

地铁1500V混合型制动能量吸收装置

地铁列车再生制动能量处理是地铁系统的一个重要课题。国内外多年来提出并实践了多种方案,但是没有一种方案的技术性能、节能减排效果、设备造价等各方面综合性能让用户普遍满意。本文介绍了电阻＋逆变混合型制动能量吸收装置。该装置以较先进的技术性能、较低的设备造价在保证列车正常制动的同时较好地实现节能减排效果,具有良好的工程应用前景。     

基于混合补偿的同相牵引供电系统

为解决异相牵引供电方式存在的电能质量和电力机车过分相问题,将有源补偿和无源对称补偿技术相结合,提出基于平衡变压器接线方式的混合式同相牵引供电系统结构。文中给出混合式同相供电的统一补偿理论、无源补偿系统的无源元件参数计算方法、有源补偿的控制策略、无源和有源补偿的协调控制策略。最后,以采用YNvd接线方式的平衡变压器为例,采用MATLAB软件仿真验证该系统方案和控制策略的正确性。     

多能源动力总成半实物仿真试验系统研究

采用软件工程方法，在MATLAB／Simulink建立汽车各总成模型的基础上，辅以I／O、A／D、D／A、USB和CAN接口板，集成为混合动力轿车动力总成控制器仿真试验测试平台。该试验系统能对不同控制策略和硬件结构组成的实际动力总成电控系统，进行实时仿真、测试和评价。     

我国重型车用汽油机排放现状分析及试验方法

对我国实施重型车用汽油机排放标准后的部分典型机型的排放做了统计和相关分析；比较了国内外重型汽油机排放标准和试验方法。通过对化油器机型和电喷加三效催化机型的排放测试结果的分析，论及我国重型汽油机的排放控制技术路线，提出了在用重型化油器车的污染治理和控制问题。最后，针对我国现行9工况标准的试验限值和试验方法提出了一些观点。     

符号时间序列方法在汽油机燃烧循环变动特征分析中的应用

应用一种新的分析方法———符号时间序列方法对汽油机燃烧循环变动进行了研究。测量得到了某汽油机16种不同工况下的示功图,从提高精度与有利于数据的符号化观点出发,确定以缸内峰值压力作为汽油机燃烧循环变动的表征参数,把符号时间序列分析的具体技术和实施途径应用于试验数据,获得了汽油机燃烧循环变动随转速与负荷的变化规律,提出了利用改进的SHAN NON熵作为汽油机燃烧循环变动的评价指标的新观点。研究结果表明:该方法能较好地应用于汽油机燃烧循环变动特征分析。     

Performance Evaluation of Hybrid-Drive Buses and Potential Fuel Savings in Brazilian Urban Transit

Transporting more than 55 million passengers per day, buses are the main transit mode in Brazil. Most of these vehicles use diesel oil and this situation causes dependence on oil, extensive greenhouse gas emissions and increasing air pollution in urban areas. In order to improve this situation the options for Brazilian cities include the use of alternative fuels and new propulsion technologies, such as hybrid vehicles. This article proposes a procedure for evaluating the performance of a recently developed Brazilian hybrid-drive technology. A simple procedure is presented to compare hybrid-drive buses with conventional diesel buses in urban operation focusing on fuel economy and the potential for reducing diesel oil consumption through the use of hybrid-drive buses. Field tests carried out by the authors indicate that fuel consumption improvement through the use of hybrid-drive buses would certainly exceed 20%, resulting in lower fuel costs and reduced carbon dioxide (CO₂) emissions.     

钢管-钢管混凝土复合拱桥实桥静载测试与分析

进行了第一座钢管 - 钢管混凝土复合拱试验桥--福建福鼎山前大桥实桥静载测试和有限元模拟分析,对钢管-钢管混凝土复合拱静力性能进行了讨论,研究表明,复合拱的静力性能与等截面拱相近,但拱肋变截面处应变应是设计中的控制因素,极限承载力分析应考虑双重非线性的影响.     

催化控制技术在二冲程通用小型汽油机上的应用

二冲程通用小型汽油机在非道路机械应用广泛,但排放不能满足EPA和欧盟标准,制约着发展。在解决二冲程通用小型汽油机排放的技术方案中,催化转化技术是目前的主流技术。     

Full six degrees of freedom coupled dynamic simulation of ship collision and grounding accidents

By taking advantage of the user-defined load subroutine (loadud) and the user common subroutine (usercomm) in LS-DYNA, the authors proposed a new coupled approach for simultaneously calculating structural damage and the planar 3DOF ship motions in ship collisions. The coupled procedure aimed at predicting the detailed structural damage together with reasonable global ship motions. This paper extends the method to consider the full 6DOF ship motions; thus, ship collision as well as grounding accidents can be properly handled. This method is particularly useful for design purposes because the detailed ship hull profile is not needed.A traditional ship maneuvering model is used for the in-plane surge, sway and yaw degrees of freedom with a series of nondimensional coefficients determined from experiments. It is assumed that the out-of-plane degrees of freedom are not coupled with the in-plane ship motions, and there is no coupling among roll, pitch and heave motions. The implementation is verified through free decay tests, and the obtained natural periods show good agreement with theoretical results.Several collision and grounding cases are simulated in which a supply vessel crashes into rigid plates with different orientations. The effects of the roll motion, the heave and pitch motions and the full 6DOF motions are studied. The results are compared with those from a 6DOF decoupled method. Ship motions through the proposed method compare reasonably well with SIMO results. It is found that several consecutive impacts may occur in the simulation of one collision case due to the periodic motions. This is not taken into account in the decoupled method, which makes this method unconservative.