公路改建工程路基设计

路基病害治理、路基加宽和路基防护是公路改建工程的重要组成部分，结合公路改建工程实例，就其原有路基病害加以分析，并提出了针对性的路基改建设计方案，为类似道路改建工程提供参考。     

Optimization of horizontal alignment geometry in road design and reconstruction

This paper presents a general formulation for optimization of horizontal road alignment, composed of tangential segments and circular curves suitably connected with transition curves (clothoids). It consists of a constrained optimization problem where the objective function is given by a line integral along the layout. The integrand is a function representing the cost of the road going through each point and, by considering different costs, a wide range of problems can be included in this formulation. To show it, we apply this methodology to three different situations. The two first cases are related with the design of a new road layout and used to solve a pair of academic examples. The third problem deals with the improvement of a road adapting the old path to current legislation, and it is solved taking as case study the reconstruction project for a regional road (NA-601) in the north of Spain.     

海上平台发电机房的减噪设计

简述了海上平台发电机房通风设计方案中使用噪音分析研究的流程,介绍了建立几何模型、输入数据得到噪音预报,得出分析结果,最终完成设计方案优化,为海上平台发电机房通风设计提供了参考.     

圆电极电磁流量计干标定模型及仿真

目前在电磁流量计的干标定研究中，为方便公式推导，通常将实际的圆电极简化为方电极模型．这种简化在电极尺寸较大时，会引入不必要的计算误差，影响流量计的标定精度．本文从圆电极模型出发，论述了其对应权重函数的计算过程．并针对大尺寸圆电极模型进行理想化计算，得到其点电极模型，并运用此模型进行了仿真研究．     

An integrated methodology for the design of mooring systems and risers

Traditionally, the design of mooring lines and risers of floating production systems (FPS) has been performed separately, by different teams, employing uncoupled analysis tools that do not consider the nonlinear interaction between the platform hull and the mooring lines and risers. Design processes have been focused on fulfilling the design criteria of the respective component (mooring/riser) alone, with few or no consideration to the other component, and little interaction between the design teams. Nowadays the importance of employing analysis tools based on coupled formulations is widely recognized, and analysis strategies have been proposed to consider feedback between mooring lines and risers within their respective design processes.In this context, this work details a proposal of one single and fully integrated design methodology for mooring systems and risers for deep-water FPS. In this methodology, the design stages of both risers and mooring lines are incorporated in a single spiral, allowing the full interaction of different teams; mooring design implicitly considers the riser integrity, and vice-versa, leading to gains in efficiency and cost reduction.Different analysis strategies are employed, taking advantage of uncoupled and coupled numerical models. The models generated at the initial/intermediate design stages can be reused in subsequent stages: simpler models are used in the initial stages, and more refined models are gradually introduced, to reach an ideal balance between computational cost and accuracy of results. In the advanced stages, the exchange of information between mooring/riser also allows the definition of criteria for the selection of governing/critical loading cases to be revised and verified in detail. This leads to the reduction of the original loading case matrix, allowing a feasible use of time-consuming fully coupled analysis.Results of a case study illustrating the application of some of the main processes of the methodology are included.     

Design and evaluation of an integrated inventory and transportation system

This paper proposes the adoption of an integrated inventory and transportation system (IITS) to minimize the total costs of inventory and transportation. A non-linear programing is developed by analyzing transportation and inventory costs with one supplier and many retailers in the distribution environment. The paper compares the proposed model with the traditional approach in computing total costs with numerical data. The results indicate that the total costs can be optimized by adopting integrated programing rather than the traditional approach, along with achieving improved customer service levels. In particular, sensitivity analysis is applied to determine the performance of the IITS under various transportation costs, holding costs and shortage costs. It shows that the transportation cost per unit is most sensitive in the proposed model. In this situation, the IITS is more effective for cost saving when set-up cost, holding and shortage costs are high, but is less effective for situations involving high per-unit transportation costs.     

船坞超高型管柱支撑设计

阐述了船坞超高型管柱支撑的设计。提出了船坞区域搭载时管子支撑与外板3种连接形式下的支撑设计允许承载力的理论计算，并对目前船坞使用的φ426mm×14mm和φ500mm×18mm两种管子进行计算分析。改进了撑管的底部支撑，提高了超高型管子支撑的使用效果和安全性。     

Privacy protection method for fine-grained urban traffic modeling using mobile sensors

With the ubiquitous nature of mobile sensing technologies, privacy issues are becoming increasingly important, and need to be carefully addressed. Data needs for transportation modeling and privacy protection should be deliberately balanced for different applications. This paper focuses on developing privacy mechanisms that would simultaneously satisfy privacy protection and data needs for fine-grained urban traffic modeling applications using mobile sensors. To accomplish this, a virtual trip lines (VTLs) zone-based system and related filtering approaches are developed. Traffic-knowledge-based adversary models are proposed and tested to evaluate the effectiveness of such a privacy protection system by making privacy attacks. The results show that in addition to ensuring an acceptable level of privacy, the released datasets from the privacy-enhancing system can also be applied to urban traffic modeling with satisfactory results. Albeit application-specific, such a “Privacy-by-Design” approach would hopefully shed some light on other transportation applications using mobile sensors.     

观音沙特大桥上部构造设计验算与长期跟踪监测

介绍了观音沙特大桥上部构造T构设计。采用新、旧规范对T构进行验算,并在营运期长期跟踪桥梁病害及挠度变化,力图从结构设计及营运期产生的病害中找到相关性,从根本上对病害进行处治,也对设计成果跟踪反馈,为同类桥型深化设计提供经验。     

Optimization of transport investment and pricing policies: the role of transport pricing in network design

This paper investigates the role of transport pricing in network design and describes two facts about flow pattern in a transportation system. The first, illustrated by an example of Braess paradox, is that adding a new link to the network does not necessarily minimize the total travel time. The second is that introducing of appropriate toll pricing may reduce not only the total network time but also the travel time for each individual traveller. It follows with the investigations of different system objectives and different pricing policies (only toll pricing and distance‐based pricing are considered), and shows how they affect the system performance and flow pattern. Lastly, a systematic optimization process is proposed for integrated planning of transport network and pricing policies.