Organic carbon budget for the Gulf of Bothnia

We calculated input of organic carbon to the unproductive, brackish water basin of the Gulf of Bothnia from rivers, point sources and the atmosphere. We also calculated the net exchange of organic carbon between the Gulf of Bothnia and the adjacent marine system, the Baltic Proper. We compared the input with sinks for organic carbon; permanent incorporation in sediments and mineralization and subsequent evasion of CO₂ to the atmosphere. The major fluxes were riverine input (1500 Gg C year^− 1), exchange with the Baltic Proper (depending on which of several possible DOC concentration differences between the basins that was used in the calculation, the flux varied between an outflow of 466 and an input of 950 Gg C year^− 1), sediment burial (1100 Gg C year^− 1) and evasion to the atmosphere (3610 Gg C year^− 1). The largest single net flux was the emission of CO₂ to the atmosphere, mainly caused by bacterial mineralization of organic carbon. Input and output did not match in our budget which we ascribe uncertainties in the calculation of the exchange of organic carbon between the Gulf of Bothnia and the Baltic Proper, and the fact that CO₂ emission, which in our calculation represented 1 year (2002) may have been overestimated in comparison with long-term means. We conclude that net heterotrophy of the Gulf of Bothnia was due to input of organic carbon from both the catchment and from the Baltic Proper and that the future degree of net heterotrophy will be sensible to both catchment export of organic carbon and to the ongoing eutrophication of the Baltic Proper.     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

浅议既有线CTCS2区段车站ZPW-2000A闭环电码化

本文从设计的角度,介绍了ZPW-2000A闭环电码化在既有线CTCS2区段的设计方案及其方案的完善。     

Periodic Orbits and Invariant Tori from a Semistable Limit Cycle in the Fast Dynamics

IntroductionIn the paper,the bifurcations of periodic or-bits and invariant tori of the following system wasstudied:x。=f(x,y) εh(t,x,y,ε)∈R2y。=εg(t,x,y,ε)∈R,0≤ε1(1)where h(t,x,y,ε)and g(t,x,y,ε)are T-periodicin t.For simplicity,the functions f,g and h areassumed to be sufficiently smooth in their argu-ments throughout this paper.In Ref.[1],Wiggins and Holmes called thesystems of form Eq.(1)as slowly varying oscilla-tors and pointed out that the systems taking theform occur as mo…     

和谐HX_D1型大功率交流电力机车电传动系统

详细介绍HXD1型大功率交流电力机车主电路和辅助电路的结构组成、工作原理、技术基础、冗余设计理念以及故障保护机理与实施情况。     

Effects of RE on the Microstructure of Mg-SZn-4Al Magnesium Alloys

The effects of RE on the microstrcture of as-cast Mg-8Zn-4Al magnesium alloys were investigated. The results show that the solidification range of Mg-8Zn-4Al-xRE alloys increases with RE additions. A binary eutectic reaction can arise and produce a new phase （Mg：Al：Zn：RE） and the temperature of phase transformation point of the new phase is 412.85 C. In Mg-8Zn-4Al-1.5RE alloy, a small amount of Mg：Al：Zn：RE phase and ε phases are found besides a（Mg）,φand r phases. Also microstructures of Mg-8Zn-4Al alloys can be refined by addition of 1.5% RE obviously.     

消费者网上购物的物流成本分析

物流服务水平影响着消费者网上购物的成本。本文从直接物流成本和间接物流成本两方面进行消费者网上购物物流成本分析,并指出:只有提高物流服务水平,降低消费者网上购物的物流成本,才能消除我国B2C电子商务发展的物流瓶颈,从而促进B2C电子商务的发展。     

C2H2作燃料的DF化学激光器燃烧室反应的数值分析

本文选用C2H2作为DF化学激光器燃烧室燃料,采用最小自由能法计算了C2H2-NF3体系不同配比下的燃烧温度和平衡组分,为进行这方面的实验提供了参考。     

O''''ZBEKISTON型机车牵引风机柜振动及开裂问题处理方法探讨

文章运用ANSYS软件对O＇ZBEKISTON型机车牵引风机柜进行了模态分析和静态强度、刚度分析，认为机车牵引风机柜振动及开裂是因风柜的固有频率与风机的工作频率相接近、风道板的强度低、刚度小、风柜刚度分布不合理引起的。据此提出对风柜的改造方案，并对改造方案的可行性进行分析。     

SS4B型电力机车（3）——微机控制系统

ＳＳ４Ｂ型电力机车微机控制系统是在ＳＳ４型００３８号机车和ＳＳ８型机车的基础上研制的，文章介绍了ＳＳ４Ｂ型电力机车微机控制系统的特点、功能和主要参数以及对原有微机控制系统所作的改进。