Vehicle mass as a determinant of fuel consumption and secondary safety performance

One interaction between environmental and safety goals in transport is found within the vehicle fleet where fuel economy and secondary safety performance of individual vehicles impose conflicting requirements on vehicle mass from an individual’s perspective. Fleet characteristics influence the relationship between the environmental and safety outcomes of the fleet; the topic of this paper. Cross-sectional analysis of mass within the British fleet is used to estimate the partial effects of mass on the fuel consumption and secondary safety performance of vehicles. The results confirmed that fuel consumption increases as mass increases and is different for different combinations of fuel and transmission types. Additionally, increasing vehicle mass generally decreases the risk of injury to the driver of a given vehicle in the event of a crash. However, this relationship depends on the characteristics of the vehicle fleet, and in particular, is affected by changes in mass distribution within the fleet. We confirm that there is generally a trade-off in vehicle design between fuel economy and secondary safety performance imposed by mass. Cross-comparison of makes and models by model-specific effects reveal cases where this trade-off exists in other aspects of design. Although it is shown that mass imposes a trade-off in vehicle design between safety and fuel use, this does not necessarily mean that it imposes a trade-off between safety and environmental goals in the vehicle fleet as a whole because the secondary safety performance of a vehicle depends on both its own mass and the mass of the other vehicles with which it collides.     

汽车轻量化开展流程及方法研究

虽然国内汽车轻量化技术有了较快的发展,但在系统性开展轻量化工作的流程和方法上依然在摸索中前进.本文通过研究国内外轻量化开展现状,初步搭建了整车轻量化开展流程,制定出一套完整的重量管控流程,尝试提出了整车轻量化新的评价方法,努力推动建立一套规范的、切实可行的轻量化工作流程体系,以促进汽车主机厂降重节能减排的顺利实施以及轻...     

高职院校发展新阶段的办学定位与办学特色研究

高职教育是高等教育的一个重要类型，积极应对存在的问题。在发展目标、师资队伍建设、明的办学特色。在新的发展阶段，必须确立科学的办学定位，专业设置、校企合作和人才培养等方面形成鲜     

浅谈高速公路桥头跳车的因素及预防措施

桥头跳车一直是高速公路投入使用后普遍存在的问题,本文通过查阅各种资料及本人施工经验,归纳总结了桥头跳车问题产生的原因,提出了桥头跳车问题的预防措施,以便为今后类似工程的施工提供参考。     

(Unintended) Transport impacts of an energy-environment policy: The case of CNG conversion of vehicles in Dhaka

Motor vehicles are one of the major sources of air pollution in Dhaka, the capital of Bangladesh. The government took various policies to convert the petroleum vehicles on road to run on compressed natural gas (CNG), which allows both air quality improvements and energy security benefits. One of the market friendly policies to encourage the fuel switch was to increase the price differential between CNG and petrol and diesel. This has allowed a wide-scale adoption of CNG as the fuel of choice. However, several years into the policy, there is now a widespread belief among the policymakers that the CNG conversion may have increased car ownership and car travel due to their lower running costs, resulting in more congestion and a reversal of the strategy is on the cards. It is therefore important to test the hypothesis whether CNG conversion had genuinely increased car ownership and car travel in Dhaka city. This paper presents the results of a questionnaire survey and an econometric intervention analysis to understand the impact of CNG conversion on car ownership and car travel in Dhaka. Attention is also given to disentangle the self-selection and price-induced travel effects of CNG conversion. Results show that ownership did not increase, but travel of on-road vehicles increased due to the CNG policy. However, additional congestion costs are still around one half of the health benefits brought about by the policy.     

Order-first split-second methods for vehicle routing problems: A review

Cluster-first route-second methods like the sweep heuristic (Gillett and Miller, 1974) are well known in vehicle routing. They determine clusters of customers compatible with vehicle capacity and solve a traveling salesman problem for each cluster. The opposite approach, called route-first cluster-second, builds a giant tour covering all customers and splits it into feasible trips. Cited as a curiosity for a long time but lacking numerical evaluation, this technique has nevertheless led to successful metaheuristics for various vehicle routing problems in the last decade. As many implementations consider an ordering of customers instead of building a giant tour, we propose in this paper the more general name of ordering-first split-second methods. This article shows how this approach can be declined for different vehicle routing problems and reviews the associated literature, with more than 70 references.     

Energy-aware control for automated container terminals using integrated flow shop scheduling and optimal control

The performance of container terminals needs to be improved to handle the growth of transported containers and maintain port sustainability. This paper provides a methodology for improving the handling capacity of an automated container terminal in an energy-efficient way. The behavior of a container terminal is considered as consisting of a higher level and a lower level represented by discrete-event dynamics and continuous-time dynamics, respectively. These dynamics represent the behavior of a large number of terminal equipment. The dynamics need to be controlled. For controlling the higher level dynamics, a minimal makespan problem is solved. For this, the minimal time required by equipment for performing an operation at the lower level is needed. The minimal time for performing an operation at the lower level is obtained using Pontryagin’s Minimum Principle. The actual operation time allowed by the higher level for processing an operation at the lower level is subsequently determined by a scheduling algorithm at the higher level. Given an actual operation time, the lower level dynamics are controlled using optimal control to achieve minimal energy consumption while respecting the time constraint. Simulation studies illustrate how energy-efficient management of equipment for the minimal makespan could be obtained using the proposed methodology.     

An analysis of trends in passenger and freight transport energy consumption in India

This primary objective of this paper is to examine the causes for the change in energy consumption in the transport sector in India. The pattern of energy consumption and their causes for change are benchmarked against select countries. A mathematical model that decomposes changes in energy consumption to various factors has been used. The changes in the energy consumption are attributed to growth in transport volume, structural change or modal shift, and energy intensity. The analysis is conducted for passenger and freight transport separately. Results indicate that the growth in transport volume has been the main cause for increase in energy consumption for both passenger and freight transport in India despite the decline in energy intensity of various transport modes. Though not surprising for a growing economy like India, this poses a challenge for the future. Currently, India is a low carbon economy.     

基于USB接口的电力机车能耗记录与分析系统

以C8051F单片机作为中央处理器,采集电参数计量模块和TAX2型机车安全综合监测装置的信息,生成并存储电量消耗记录;通过USB盘转储数据到地面进行处理和分析。系统整体设计具有模块化、准确可靠的特点,对电力机车节能降耗措施提供合理的依据。     

Evolution of the household vehicle fleet: Anticipating fleet composition, PHEV adoption and GHG emissions in Austin, Texas

In today’s world of volatile fuel prices and climate concerns, there is little study on the relationship between vehicle ownership patterns and attitudes toward vehicle cost (including fuel prices and feebates) and vehicle technologies. This work provides new data on ownership decisions and owner preferences under various scenarios, coupled with calibrated models to microsimulate Austin’s personal-fleet evolution.Opinion survey results suggest that most Austinites (63%, population-corrected share) support a feebate policy to favor more fuel efficient vehicles. Top purchase criteria are price, type/class, and fuel economy. Most (56%) respondents also indicated that they would consider purchasing a Plug-in Hybrid Electric Vehicle (PHEV) if it were to cost $6000 more than its conventional, gasoline-powered counterpart. And many respond strongly to signals on the external (health and climate) costs of a vehicle’s emissions, more strongly than they respond to information on fuel cost savings.Twenty five-year simulations of Austin’s household vehicle fleet suggest that, under all scenarios modeled, Austin’s vehicle usage levels (measured in total vehicle miles traveled or VMT) are predicted to increase overall, along with average vehicle ownership levels (both per household and per capita). Under a feebate, HEVs, PHEVs and Smart Cars are estimated to represent 25% of the fleet’s VMT by simulation year 25; this scenario is predicted to raise total regional VMT slightly (just 2.32%, by simulation year 25), relative to the trend scenario, while reducing CO₂ emissions only slightly (by 5.62%, relative to trend). Doubling the trend-case gas price to $5/gallon is simulated to reduce the year-25 vehicle use levels by 24% and CO₂ emissions by 30% (relative to trend).Two- and three-vehicle households are simulated to be the highest adopters of HEVs and PHEVs across all scenarios. The combined share of vans, pickup trucks, sport utility vehicles (SUVs), and cross-over utility vehicles (CUVs) is lowest under the feebate scenario, at 35% (versus 47% in Austin’s current household fleet). Feebate-policy receipts are forecasted to exceed rebates in each simulation year.In the longer term, gas price dynamics, tax incentives, feebates and purchase prices along with new technologies, government-industry partnerships, and more accurate information on range and recharging times (which increase customer confidence in EV technologies) should have added effects on energy dependence and greenhouse gas emissions.