Full six degrees of freedom coupled dynamic simulation of ship collision and grounding accidents

By taking advantage of the user-defined load subroutine (loadud) and the user common subroutine (usercomm) in LS-DYNA, the authors proposed a new coupled approach for simultaneously calculating structural damage and the planar 3DOF ship motions in ship collisions. The coupled procedure aimed at predicting the detailed structural damage together with reasonable global ship motions. This paper extends the method to consider the full 6DOF ship motions; thus, ship collision as well as grounding accidents can be properly handled. This method is particularly useful for design purposes because the detailed ship hull profile is not needed.A traditional ship maneuvering model is used for the in-plane surge, sway and yaw degrees of freedom with a series of nondimensional coefficients determined from experiments. It is assumed that the out-of-plane degrees of freedom are not coupled with the in-plane ship motions, and there is no coupling among roll, pitch and heave motions. The implementation is verified through free decay tests, and the obtained natural periods show good agreement with theoretical results.Several collision and grounding cases are simulated in which a supply vessel crashes into rigid plates with different orientations. The effects of the roll motion, the heave and pitch motions and the full 6DOF motions are studied. The results are compared with those from a 6DOF decoupled method. Ship motions through the proposed method compare reasonably well with SIMO results. It is found that several consecutive impacts may occur in the simulation of one collision case due to the periodic motions. This is not taken into account in the decoupled method, which makes this method unconservative.     

汉巴南铁路兰渝联络线电分相设置方案研究

联络线电分相设置方案影响因素众多,且其设置与否对工程和运营的影响也较大。本文对汉巴南铁路兰渝联络线电分相设置方案进行研究,提出高速铁路设置关节式电分相联络线最短长度;对联络线电分相不同设置方案进行比选研究,并结合各方案的土建工程、信号系统、供电系统及限制因素提出布局优化措施,以期为联络线电分相合理设置与优化布局提供新思路。     

Socially optimal electric driving range of plug-in hybrid electric vehicles

This study determines the optimal electric driving range of plug-in hybrid electric vehicles (PHEVs) that minimizes the daily cost borne by the society when using this technology. An optimization framework is developed and applied to datasets representing the US market. Results indicate that the optimal range is 16 miles with an average social cost of $3.19 per day when exclusively charging at home, compared to $3.27 per day of driving a conventional vehicle. The optimal range is found to be sensitive to the cost of battery packs and the price of gasoline. When workplace charging is available, the optimal electric driving range surprisingly increases from 16 to 22 miles, as larger batteries would allow drivers to better take advantage of the charging opportunities to achieve longer electrified travel distances, yielding social cost savings. If workplace charging is available, the optimal density is to deploy a workplace charger for every 3.66 vehicles. Moreover, the diversification of the battery size, i.e., introducing a pair and triple of electric driving ranges to the market, could further decrease the average societal cost per PHEV by 7.45% and 11.5% respectively.     

南昌红谷沉管隧道短管节干坞内拉合对接施工技术

沉管隧道最终接头短管节在牵移和拉合过程中易发生偏移与倾斜,且GINA止水带压缩到设计值难度较大。以南昌红谷沉管隧道为例,从准备、牵移、拉合及后处理4个阶段介绍短管节对接拉合施工工艺。通过对底钢板打磨、涂抹黄油等,减小底部摩擦阻力。采用计算机控制液压同步提升系统、液压数据量测、钢端壳间距测量等措施,对短管节轴线及平面控制。实践表明:GINA止水带压缩量误差仅为+4 mm,短管节轴线及平面偏差均在可控范围内,短管节干坞内拉合对接操作可行、质量可靠。     

基于小波和粒子群算法的HEV行驶状况辨识方法研究

针对混合动力汽车(HEV)行驶状况(道路坡度和整车载荷)变化难以有效识别,导致驱动系统控制策略不能有效满足驾驶员意图问题,以混联式HEV为研究对象,提出了基于小波滤波和粒子群算法的HEV行驶状况辨识方法。首先建立了汽车行驶状况辨识模型,采用最小二乘法确立了优化目标函数,其次研究了基于小波滤波和粒子群算法的HEV行驶状况辨识原理,最后进行了行驶状况粒子群智能算法辨识试验。在采集实车数据的基础上,对实车数据进行小波滤波,并运用行驶状况辨识方法对道路坡度和整车载荷进行了辨识,并对辨识结果进行小波滤波,结果表明,试验工况下整车载荷辨识的相对误差绝对平均值为2.71%,道路坡度辨识的相对误差绝对平均值为3.85%,验证了所提出方法的有效性。     

行政法与行政诉讼法教学法探析

“行政法与行政诉讼法学”是一门复杂的有较强理论性但又必须和社会实际相结合的课程。要提高该课程的教学质量,改善教学效果,文中提出了案例教学法、多媒体技术与模拟法庭教学法。     

改进的免疫模拟退火算法求解混合流水车间调度问题

针对混合流水车间调度问题的特点,设计了一种双层编码和解码的方法,在一定程度上扩大了可行解的搜索范围,为了克服传统免疫算法在初期收敛速度慢的问题,在算法的早期应用特定的变异算子,以期提高收敛速度,为避免算法陷入局部最优解,在算法后期,利用模拟退火算法的随机扰动性,引导算法跳出局部最优解,同时还引入了免疫记忆,运用精英保留策略预防最优解的丢失,最终提出了一种改进的混合免疫算法.通过仿真结果表明了该算法在解决混合流水车间问题上的可行性和有效性.     

船舶焊接常见裂纹分析及控制

船体结构焊接过程中,会出现各种不同的焊接缺陷,焊接裂纹则是最危险的一种缺陷。从船厂生产实际出发,分析船舶建造的过程中容易产生焊接裂纹的部位以及裂纹类型,对产生裂纹的原因进行“把脉分析”,进行一系列的会诊;并结合具体的案例及现场试验结果,找到真正的“病因”所在;独辟蹊径,对容易忽略的影响因素进行深入研究。结合具体的生产条件,提出切合实际、经济有效的方法,来提高焊接质量和产品结构的可靠性。     

集装箱船型线多速度点的数值优化

为获得更优化的EEDI指数,集装箱船需要基于营运范围内的型线优化,以实现油耗降低。文章以某集装箱船为研究对象,利用数值优化集成系统,采用最优化技术、曲面自由变形技术(FFD)和计算流体力学技术(CFD),对船体首部型线进行优化。数值计算表明:所得到的优化型线高速段功率略有增加、低速段功率显著降低。     

复杂海域条件下大跨悬索桥钢箱梁安装关键技术

浙江秀山大桥主桥为主跨926 m的双塔三跨连续钢箱梁悬索桥,全桥加劲梁共分89个安装节段,标准节段吊装重量212.6 t,最大吊装重量247.1 t.桥址处地理环境复杂、海洋环境恶劣,钢箱梁安装难度大.根据现场实际情况,钢箱梁中跨由跨中向桥塔方向对称吊装,两岸边跨由锚碇向桥塔方向对称吊装,先合龙中跨再合龙边跨.施工过程...