基于Pro/E三维船体几何造型的研究

为建立形态复杂的船体三维模型,选用Pro/E强大的曲面建模技术来实现三维船体的建模。对某渔船进行了具体的建模操作,使读者能更好地了解PRO/E在建模方面的优越性。     

透水沥青路面技术在水泥混凝土路面改造中的应用

水泥混凝土路面是指以水泥混凝土为主要材料做面层的路面,俗称白色路面,它具有强度高、稳定性好、使用年限长、养护维修费用少等优点。但在交通荷载及环境等因素影响下,水泥混凝土路面使用一段时间后,会出现板块开裂、角隅破碎、错台等不同程度的病害,为了恢复旧路面的使用性能,往往采取加铺沥青混凝土面层的措施。该文结合上海市奉贤区环城东路水泥混凝土路面改造为透水沥青路面的工程实例,介绍了透水沥青路面,以及橡胶沥青应力吸收层技术的应用。     

基于Pro/Engineer建立客车多层次BOM的方法

介绍Pro/Engineer多层次BOM结构、物料清单功能和环境设置,研究在客车设计中BOM构造及拓展功能的方法。     

挖掘机动臂结构模态分析

运用Pro/Mechanica软件对挖掘机动臂结构进行模态分析,得到了挖掘机动臂模态的各阶频率与振型及挖掘机动臂的模态频率与挖掘机发动机工作频率之间的关系;通过与针对性试验结果进行比较,验证了Pro/Mechanica结构分析结论的可靠度。     

工程机械传动机构行星轮系的建模与仿真

进行工程机械车辆传动机构中行星轮系基于结构与机构设计以及运动仿真的研究。运用Pro/Engineer的实体建模、虚拟装配和机构仿真功能,对齿轮进行了参数化设计,与相关零件虚拟装配形成了行星轮系;并对轮系进行了运动仿真,有效提高了产品的设计、开发速度,可降低研制费用,为工程机械车辆零部件的CAD、各种技术分析和无纸自动化制造奠定基础。     

基于Pro/E马勒里举升机构设计的动态仿真

仿真技术在机械产品的开发中起着非常重要的作用.本文介绍了基于Pro/E环境下进行机构运动仿真的特点、方法、对象和主要应用范围,并以马勒里举升机构的设计为例进行了机构运动仿真的具体实践,实现了设计的优化,提高了产品开发的效率和可靠性.     

Environmental impact assessment of sediment dumping in the southern Baltic Sea using meiofaunal indicators

An experimental sediment dumping was carried out in the southern part of the Mecklenburg Bight in June 2001. Foraminiferans and ostracods from superficial sandy sediment were studied in a time series from before dumping until March 2004 in order to assess changes in associations and recolonization patterns of both groups. Additionally, an area sampling covering the dumping site and its surroundings from 15.5 to 20.7 m water depth made it possible to compare associations inside and outside the dumping area as well as the water depth dependent distribution of foraminiferans and ostracods. Salinity values vary within the high alpha-mesohaline and low polyhaline range. The dominating species are Ammotium cassis (Foraminifera) and Sarsicytheridea bradii (Ostracoda). The diversity is low (Fisher alpha index from 0.4 to 3.2 for foraminiferans and 1.0 to 2.5 for ostracods), but higher within the dumping site samples. These higher values are explainable by input of allochthonous tests and valves representing additional species. After the sediment dumping it took two and a half years to re-establish the total foraminiferan association and the total foraminifer/ostracod ratio within the dumping site. Total foraminiferan abundance increases remarkably with water depth (mean 83 tests in 100 ml) driven by higher nutrient availability and more suitable salinity and temperature values within the zone of the oscillating halocline. The distribution of shallow water species such as Cribroelphidium excavatum, Eucythere argus and Hirschmannia viridis, within the transient water layer A. cassis, Nodulina dentaliniformis, S. bradii and Palmoconcha laevata and below Eggerella scabra indicate the depth position of the halocline. Water depth and sediment dumping influence are the main driving factors for the distribution of foraminifer and ostracod associations within the study area. However, a significant sedimentological difference between samples inside and outside the dumping area is not recognizable.     

基于DSP的E1光纤线路检测接口的实现

通过介绍基于DSP的E1线路检测接口的设计,给出了系统的硬件结构及软件设计方法.系统CPU采用TI公司的DSP芯片TMS320F2812,选取高性能E1收发器芯片PEF22554作为线路检测芯片,实现对E1线路各项物理性能指标及帧结构的检测分析.     

舰船高噪声环境下的语音编解码系统的实现

在研究语音编解码技术现状和发展趋势的基础上,针对舰船高噪声背景下语音信号的特点,利用DSP开发研制了一种语音编解码系统。详细阐述了系统的组成及工作原理,并采用自适应干扰抵消和G.729E相结合的方法,实现了低码率高语音质量的语音压缩与解压缩。     

803E掘进机刀盘振动问题浅探

 大伙房引水隧道工程TBM2标采用德国Wirth公司型号为803E的掘进机。掘进过程中刀盘振动问题较为严重，导致联接螺栓超常松动和联接部件裂纹，影响了施工进度和设备的完好率。从该机主机受力结构的动刚度以及刀盘结构形式方面浅探该机刀盘振动问题，并与Robbins公司掘进机的主体结构进行比较，试图提出选型和设计方面的建议。