An Original Feedback Control with a Reversible Electromechanical Actuator Used as an Active Isolation System for a Seat Suspension. Part I: Theoretical Study

This paper provides an overview of a theoretical study of an active seat suspension. The principal objective of this study is to improve ride passenger comfort by reducing transmitted seat acceleration. The seat is represented by a non-linear two degree of freedom model. The system is linearized for small perturbations around the equilibrium. To control the dynamic of the seat suspension, an original feedback control command with a reversible electromechanical actuator is achieved. The synthesis of the regulator is realized on the linearized model of the seat suspension and the root locus method is employed. Stability and robustness characteristics have been studied. Numerical simulations in time and frequency domain show the interests of the regulator and its capability to isolate seat passenger.     

A passenger car driver model for higher lateral accelerations

Due to increasing demands for time and cost efficient vehicle and driver assistant systems development, numerical simulation of closed-loop manoeuvres becomes increasingly important. Thus, the driver has to be considered in the modelling. On the basis of a two-layer approach to model a driver's steering behaviour, the field of application is extended to higher lateral accelerations in this study. An analytical method to determine the driver parameters is presented, which is based on the two-wheel vehicle model. The simulation results are determined using a full vehicle model including all essential nonlinearities. Standard manoeuvres in the nonlinear range of vehicle handling behaviour are performed. A cornering manoeuvre is chosen to show the characteristics of the proposed driver model.     

Virtual test rig to improve the design and optimisation process of the vehicle steering and suspension systems

A virtual test rig is presented using a three-dimensional model of the elasto-kinematic behaviour of a vehicle. A general approach is put forward to determine the three-dimensional position of the body and the main parameters which influence the handling of the vehicle. For the design process, the variable input data are the longitudinal and lateral acceleration and the curve radius, which are defined by the user as a design goal. For the optimisation process, once the vehicle has been built, the variable input data are the travel of the four struts and the steering wheel angle, which is obtained through monitoring the vehicle. The virtual test rig has been applied to a standard vehicle and the validity of the results has been proven.     

基于SoftPLC的船舶主机遥控物理仿真模拟器设计

模拟器以一艘1600 TEU集装箱船使用的Autochief IV主机控制系统作为原型,采用SoftPLC实现对船舶主机遥控物理仿真模拟器的控制。利用组态软件PIMS作为上位机开发平台,实现数据的存储及功能的完善。在模拟器上可以进行各种相关的训练操作,达到培训学员的目的。     

基于CBTC控制的全自动驾驶系统

主要介绍全自动驾驶(FAO)系统的发展和应用情况、系统的组成和特点,并提出引进采用该系统需要注意的问题。     

公路隧道施工质量控制要点

阐述了公路隧道施工质量控制要点.     

EA4T车轴钢的超声冲击表面强化

利用超声冲击设备对EA4T车轴钢进行了表面强化处理.采利用金相显微镜和透射电镜表征了车轴钢表面结构的变化,并对超声冲击处理前后试样表面粗糙度和显微硬度进行了分析.结果表明:经超声冲击处理后,试样表面发生了剧烈的塑性变形,晶粒明显细化,显微硬度呈梯度化.随着超声冲击功率的增加,变形层厚度增加,粗糙度减小,表面硬度增大;与未经超声冲击处理的试样相比,在超声冲击功率180瓦作用下,表面粗糙度降低了6.5倍,试样的表面硬度提高了25%,变形层厚度大约为80μm.     

机场轨道交通对陆侧交通分流情况的预测研究

机场轨道交通的发展将是解决机场陆侧交通拥堵问题的主要途径之一.本文首先通过灰色预测模型GM(1,1)对首都机场的陆侧交通量进行预测,得出进出机场的旅客中乘坐机场巴士及出租车的人数.在此基础上,运用排队论的方法,分析机场轨道交通对机场巴士及出租车交通量的分流情况,得出各自具体的分流率和分流量.最后,根据马尔可夫链的方法,对分流情况的发展趋势进行分析,得出其稳定分流率.     

基于ANSYS的350 km/h高速动车组用鼓形齿式联轴器的参数化建模

对350 km/h高速动车组用鼓形齿式联轴器的结构进行了分析,并采用ANSYS软件的APDL语言对其实现了参数化建模,大大方便了以后对该联轴器进行的相关分析,并且为复杂结构的建模提供了一个新的思路和方法.     

针摆传动中弓背齿廓的受力分析

针对针摆传动中的高精度要求,给出了求最佳修形量的优化方法,在对齿廓修形产生的几何相对转角进行计算的基础上提出了弓背齿廓,进行了理论分析研究,并通过动态受力分析方法得到齿面接触力和接触应力.采用弓背齿廓修形方式计算结果表明,最佳弓背齿廓修形可以获得较小几何相对转角,有效减小回转误差,实现高精度传动,以适用于有高精度要求的针摆传动中.