新七道梁隧道量测位移反分析及工程应用

以新七道梁隧道为工程背景,采用平面应变边界元BM P 90程序,将围岩简化成等效连续均质各向同性的线弹性介质,将锚喷支护提供的支护抗力看成边界元上的分布力,根据收敛值和拱顶下沉值推求等效弹性模量和侧压力系数。然后利用反分析得出结果,对围岩的应力与变形进行了分析。     

深圳地铁14号线黄木岗站三线换乘方案研究

深圳地铁14号线黄木岗站与既有7号线、近期规划24号线黄木岗站形成地下三线换乘车站，车站周边环境复杂。如何综合各种边界条件形成建筑功能完善，结构经济安全，同时又对周边环境影响最小的方案是本站研究的重点，特别是车站站位及换乘功能的研究。方案设计过程中，通过逐一梳理地面建筑、地下建(构)筑物、地面交通、片区规划、工程地质条件、客流预测、车站换乘功能等边界条件，总结黄木岗站立交桥安全、交通疏解、管线改迁、结构工法、施工器具选择、车站站位及换乘功能等重难点，采取逐项突破的方法，最终推演出“干”字形节点换乘方案，其中14号线采用地下3层双叠侧式车站，与7号线形成平行同台换乘，与24号线形成台-台换乘。     

三阶非线性边值问题的奇摄动

利用微分不等式技巧和Volterra型积分算子，研究了一类三阶非线性奇摄动边值问题解的存在和渐近估计。     

Enhancing grey prediction fuzzy controller for active suspension systems

A grey prediction fuzzy controller (GPFC) was proposed to control an active suspension system and evaluate its control performance. The GPFC employed the grey prediction algorithm to predict the position output error of the sprung mass and the error change as input variables of the traditional fuzzy controller (TFC) in controlling the suspension system to suppress the vibration and the acceleration amplitudes of the sprung mass for improving the ride comfort of the TFC used; however, the TFC or GPFC was employed to control the suspension system, resulting in a large tire deflection so that the road-holding ability in the vehicle becomes worse than with the original passive control strategy. To overcome the problem, this work developed an enhancing grey prediction fuzzy controller (EGPFC) that not only had the original GPFC property but also introduced the tire dynamic effect into the controller design, also using the grey prediction algorithm to predict the next tire deflection error and the error change as input variables of another TFC, to control the suspension system for enhancing the road-holding capability of the vehicle. The EGPFC has better control performances in suppressing the vibration and the acceleration amplitudes of the sprung mass to improve the ride quality and in reducing the tire deflection to enhance the road-holding ability of the vehicle, than both TFC and GPFC, as confirmed by experimental results.     

Parameters optimisation of a vehicle suspension system using a particle swarm optimisation algorithm

The purpose of this paper is to determine the lumped suspension parameters that minimise a multi-objective function in a vehicle model under different standard PSD road profiles. This optimisation tries to meet the rms vertical acceleration weighted limits for human sensitivity curves from ISO 2631 [ISO-2631: guide for evaluation of human exposure to whole-body vibration. Europe; 1997] at the driver's seat, the road holding capability and the suspension working space. The vehicle is modelled in the frequency domain using eight degrees of freedom under a random road profile. The particle swarm optimisation and sequential quadratic programming algorithms are used to obtain the suspension optimal parameters in different road profile and vehicle velocity conditions. A sensitivity analysis is performed using the obtained results and, in Class G road profile, the seat damping has the major influence on the minimisation of the multi-objective function. The influence of vehicle parameters in vibration attenuation is analysed and it is concluded that the front suspension stiffness should be less stiff than the rear ones when the driver's seat relative position is located forward the centre of gravity of the car body. Graphs and tables for the behaviour of suspension parameters related to road classes, used algorithms and velocities are presented to illustrate the results. In Class A road profile it was possible to find optimal parameters within the boundaries of the design variables that resulted in acceptable values for the comfort, road holding and suspension working space.     

Towards comfort-optimal trajectory planning and control

ABSTRACT

This paper describes a method to analyse and evaluate different trajectory planning methods and controller types for usage in automated vehicles. Its application is shown by using a novel trajectory planning approach considering comfort aspects (based on Rapidly Exploring Random Tree (RRT)), two different controllers to follow the planned path (cascade controller and flatness based controller) and a simulation method to obtain resulting lateral vehicle accelerations. The method is used to plan and drive a trajectory through a roundabout. It can be seen that the lateral accelerations of the controller-driven vehicle are in the range of the values used for planning. However, the results of both controllers show differences in lateral deviation and in smoothness of lateral accelerations. The simulation results are then compared to real-world test drives in the same roundabout. The measured lateral accelerations are in the same range as well but show a smoother progression than the two controller models.     

计算机联锁基于通信的跨边界控制模式分析

介绍地铁项目中基于通信网络的联锁系统跨边界控制方案。     

整车平顺性仿真的标准化分析研究

为了规范整车在平顺性研究方面的仿真计算,本文提出了从输入要求到平顺性模型建立及最后的数据处理等一系列标准化研究的方法。该方法在企业的应用实施工作表明,采用整车平顺性仿真的标准工作方法,可以很好地规范CAD/CAE数据,既保证了设计各阶段数据的全相关、共享,同时也保证了主模型的安全,方便设计人员与CAE分析人员之间的数据交换,提高了平顺性仿真模型的构建效率和分析质量。     

高速空调客车通过隧道时车内压力波数值方法初探

高速列车通过隧道时会带来乘客舒适性问题。现利用流入、流出相邻两节密封车厢的流量关系,发展了高速空调客车车厢在彼此隔离条件下车外压力引起的车内压力计算方法,模拟了客车在加装风量调节式控制系统时隧道单车压力波与会车压力波条件下的车内压力波动规律,验证了该类系统减缓车内压力的有效性。     

船舶舱室置换通风系统的数值模拟和优化

船上有些空间大、人员集中、船体结构复杂的舱室,传统送风方式难以满足需求,给空气环境设计带来很大挑战。文章采用计算流体力学方法研究置换通风系统在船舶舱室中的应用,通过建立物理和数值计算模型,在设计初始阶段对其进行气流组织、热舒适性等方面的模拟分析和优化应用研究;针对某实船舱室的置换通风系统原始方案和优化方案进行对比分析,结果表明置换通风系统具有流动分层和垂直温度梯度的特点。相比原始方案,优化方案使舱室内温度、风速和热舒适性指标等得到优化,有效降低了吹风感,保证人体周围的空气品质,热舒适性指标也符合标准要求。对船舶置换通风系统的应用研究具有借鉴意义。