光面爆破技术在城市地铁隧道施工中的应用

文章从光面爆破机理、光面爆破技术中各主要参数的确定,以及光面爆破在实际工程中的应用几个方面出发,以深圳地铁安-侨区间隧道硬岩段施工为例,研究分析了如何利用光面爆破技术来提高城市地铁浅埋暗挖法的光爆效果,特别是近距离穿越重要建(构)筑物时如何有效进行光面爆破。     

Comparative analysis of household car,motorcycle and bicycle ownership between Osaka metropolitan area,Japan and Kuala Lumpur,Malaysia

The interactions among different types of vehicle ownership including car, motorcycle and bicycle are examined by developing simultaneous vehicle ownership models in this study. Large scale person trip survey data for Osaka metropolitan area, Japan and Kuala Lumpur, Malaysia are used for empirical analysis. The results suggest that population density at residential area significantly and negatively affects car ownership for both areas, and that the effects are larger for Osaka metropolitan area than for Kuala Lumpur. Also, bicycle ownership becomes higher at higher population density area for Osaka area, while higher at lower population density area for Kuala Lumpur, which represents the different usage patterns of bicycle between the two areas.

风积沙的工程力学性质试验研究

结合毛乌素沙漠沙样,对风积沙的工程力学性质进行了系统的试验研究。试验结果表明:风积沙的压实可采用常规的击实试验方法和振动密实法,压实效果受颗粒级配、含水量、荷载大小、振动频率及振幅等多种因素影响;风积沙的内摩擦角与压实度之间呈线性变化规律,颗粒级配是主要影响因素,含水量影响较小;风积沙的室内回弹模量和加州承载比与压实度之间大致呈非线性增大规律,在某一压实度区间增大的幅度非常小。     

一种改进的Jakes’信道模型及仿真

由于无线通信环境中存在的诸多不确定因素以及其在现代无线通信系统中的重要作用，合理的无线信道成为通信系统仿真研究的重要目的。确立信道仿真模型的目的就是为了尽可能的得到实际信道的统计特性，该文针对Jakes提出的信道模型，通过仿真来分析其局限性，并参考其中的谐波叠加（sum of sinusoids，SOS）法，来建立一种采用了随机分支增益、随机初始相位和有条件的随机多普勒频率改进的信道模型。     

大粒径沥青混合料基层施工压实控制研究

结合沪蓉西高速公路宜长试验段采用大粒径沥青混合料(LSAM)作为柔性基层的实例,采用核子密度仪进行施工压实度跟踪检测。检测结果表明:胶轮压路机对LSAM压实度的提高作用不明显;LSAM-30一次性铺筑13.5cm仍能保证其具有较好的压实性能;核子密度仪测得LSAM压实度有较高水平且有减小趋势时,应立即停止碾压。另外,对LSAM压实度"超百"现象进行了研究,指出对于LSAM基于旋转压实仪的标准密度能更好地指导现场施工。     

一种新概率密度函数的提炼及在公路中的应用

利用汕梅高速公路混凝土路面标的施工试验数据,提炼出了一种新的非正态概率密度函数,并对施工结果进行了检验,得出了可靠的结果。     

基于ADAMS／Car Ride车辆平顺性仿真研究

以虚拟样机技术进行车辆平顺性仿真研究．建立了基于ADAMS／Car Ride的多体动理学模型，通过虚拟四柱试验台对模型进行仿真试验。仿真结果表明，ADAMS／Car Ride可方便地进行路面功率谱密度响应仿真试验，所建立的包含虚拟四柱试验台的整车模型可深入进行车辆平顺性研究。     

Extent and correlates of walking in the USA

This paper examines data about walking trips in the US Department of Transportation’s 2001 National Household Travel Survey. The paper describes and critiques the methods used in the survey to collect data on walking. Using these data, we summarize the extent of walking, the duration and distance of walk trips, and variations in walking behavior according to geographic and socio-demographic factors. The results show that most Americans do not walk at all, but those who do average close to thirty minutes of walking a day. Walk trips averaged about a half-mile, but the median trip distance was a quarter of a mile. A significant percentage of the time Americans’ walk was spent traveling to and from transit trips. Binary logit models are used for examining utility and recreational walk trips and show a positive relationship between walking and population density for both. For recreational trips, this effect shows up at the extreme low and high ends of density. For utility trips, the odds of reporting a walk trip increase with each density category, but the effect is most pronounced at the highest density categories. At the highest densities, a large portion of the effect of density occurs via the intermediary of car ownership. Educational attainment has a strong effect on propensity to take walk trips, for both for utility and recreation. Higher income was associated with fewer utility walk trips but more recreational trips. Asians, Latinos, and blacks were less likely to take utility walk trips than whites, after controlling for income, education, density, and car ownership. The ethnic differences in walking are even larger for recreational trips.     

无核密度仪在沥青路面施工中的应用

文章通过对美国产PQI-301路面无核密度仪的应用,介绍了其标定的具体方法及其对沥青路面施工过程中的碾压工艺的确定、压实度的测定及在路面离析情况分析中的作用。     

城市快速路基本路段运行状况评价方法研究

与传统的服务水平评价不同，采用能够综合反映道路管理者和道路使用者共同要求的评价指标——临界密度比对城市快速路基本段的运行状况进行评价；根据快速路交通信息采集系统提供的大量数据，比选了适合的交通流模型，并对临界密度进行标定；最后给出了评价指标的等级划分和对应状态的描述。