基于指数函数非线性反馈的船舶航向保持控制

为研究船舶航向保持控制问题,本文以“育鹏”轮为研究对象,建立了其非线性Nomoto船舶模型,设计了基于闭环增益成形算法的指数函数非线性反馈控制器,并以“育鹏”轮的非线性模型为被控制对象,用Matlab的Simulink工具箱进行系统仿真研究。系统仿真结果表明,建立的非线性Nomoto数学模型精度良好,设计的控制器进行船舶航向保持控制时效果优异,并且更节能。使用这种方法设计的控制器,可以很好地进行船舶航向保持控制,对今后的船舶运动仿真和控制器的设计具有重要意义。     

基于差异时效的服务评价模型

针对KNN(k-nearest neighbor)方法在服务评价过程中存在的时效量化、评价窗口宽度以及反馈控制等问题,提出了具有差异时效的服务评价模型(WSEM-VTU).在WSEM-VTU中,采用系统动力学方法研究复杂时效量化方法,以获得差异时效量化结果;基于复杂时效量化方法得到的结果,自适应计算评价窗口宽度;根据评价统计特征,设计恶意评价反馈控制策略.通过实验,将WSEM-VTU与现有评价模型WSEM-E及WSEM-KNN进行比较,结果表明:WSEM-VTU的平均误差为0.877,比WSEM-E和WSEM-KNN分别降低了1.020和0.135;引入反馈控制策略后,WSEM-VTU出现恶意评价的情况平均降低67%.     

引入迭代阈值判决导引判决反馈盲均衡算法

基于判决圆的常数模算法(CMA)和判决导引算法(DD)相结合的判决反馈盲均衡算法(CMA+DD),在均衡的起始阶段,由于眼图未睁开,DD算法无法收敛,导致收敛速度慢.为了加快收敛速度,在迭代过程中引入迭代阈值limit,以修改CMA+DD算法的判决条件,从而得到改进的CMA+DD算法(MCMA+DD).该算法在均衡的起始阶段先采用CMA迭代limit次,然后再根据判决圆进行切换.水声信道仿真结果表明,MCMA+DD算法收敛速度快;迭代阈值不同,影响收敛速度;仍具有冷启动和重新启动能力.     

道路交通安全水平预测的统计模型

为了评价和预测不同国家的道路交通安全水平,建立通用的统计模型,作者首先分析道路交通事故死亡率与人口规模、机动车保有量、道路里程以及人均GNP之间的相关关系,根据相关性选择影响道路交通事故的因素,并建立万车死亡率与人均GNP之间的函数关系.模型计算结果与校核数据对比分析表明,所提出的模型能够较好地评价和预测一个国家或地区的道路交通安全水平.模型对交通管理者提高交通安全性的科学决策具有重要指导意义.     

道路运输市场退出机制研究

道路运输市场退出机制与道路运输市场准入制度相辅相成，不可分割。文章阐述了道路运输市场退出机制的基本特点、重要作用、主要方式及实施程序，并对其在实施过程中存在的问题进行讨论。     

Optimization of horizontal alignment geometry in road design and reconstruction

This paper presents a general formulation for optimization of horizontal road alignment, composed of tangential segments and circular curves suitably connected with transition curves (clothoids). It consists of a constrained optimization problem where the objective function is given by a line integral along the layout. The integrand is a function representing the cost of the road going through each point and, by considering different costs, a wide range of problems can be included in this formulation. To show it, we apply this methodology to three different situations. The two first cases are related with the design of a new road layout and used to solve a pair of academic examples. The third problem deals with the improvement of a road adapting the old path to current legislation, and it is solved taking as case study the reconstruction project for a regional road (NA-601) in the north of Spain.     

Resolving the property right of transportation emissions through public–private partnerships

The application of public–private partnerships (P3’s) in the transportation sector has grown in popularity worldwide. Despite this important shift in the provision of transportation service, there are clear gaps in knowledge about the impacts of P3 projects, especially on emissions from transportation systems as a whole. Not only should policy makers evaluate the emissions impacts from P3 projects, but they should also think about innovative models that address or charge for emissions into P3 contracts. This addition to P3 contracts could provide a new solution to the long-existing property right paradox: who owns (is responsible for) emissions from transportation systems? This study attempts to fill the research gap by analyzing these innovative models. Using the road network of Fresno, California, as our case study, we offer a number of interesting insights for policy makers. First, average peak emissions costs range from 1.37 cents per mile (the do-nothing case) to 1.20 cents per mile (profit-maximizing cases) per vehicle. Although emissions costs from the P3 projects are lowest for the profit-maximizing cases, the system-wide emissions costs of these cases are highest because of spillover effects. Second, charging project owners for the emissions costs of P3 projects is not an effective way to reduce emissions or the total costs of travel, especially on a VMT basis. Instead, the public sector should implement emissions-included social cost-based price ceilings. When employing these limits, project owners could still be charged for the emissions costs. Finally, using total travel time as the only objective function for evaluating P3 projects can be misleading. Several P3 projects have shown better outcomes using total travel cost with the inclusion of emissions and fuel consumption costs, instead of using total travel time as the only objective function.     

基于变频技术的闭环汽车传动系统试验台的研究

介绍了采用变频技术的汽车传动系统试验台系统结构和原理，阐述了变频器在汽车传动系统总成部件测试中的运用。通过变频器的组合使用，使驱动电机和负载电机实现电闭环。以自动变速器测试为实例．试验台能按照测试要求加载，并且能够进行能量反馈和再利用。     

充分发挥道路运输业的比较优势努力做好"三个服务"——在全国道路运输工作会议上的讲话(节选)

文章充分肯定了近年来我国道路运输工作取得的成绩,阐述了交通运输业今后的工作重点,提出了道路运输业发展的总体目标和要求。     

水泥稳定碎石在二级公路基层施工中的质量控制

文章通过分析水泥稳定碎石的作用原理及形成过程,阐明了在二级公路建设中水泥稳定碎石的施工要点及控制方法。