A study on the effect of different tyre imperfections on steering wheel vibration

Multibody dynamics and tyre models have made possible detailed analysis not only for ride and handling, but also for determining their effects on tyre nonuniformities. The aim of this paper is to analyse the steering wheel vibration, both shimmy and shake, excited by different tyre imperfections by using the commercial simulation package ADAMS/car 2005R2 and FTire. Different settings with respect to imperfection locations, amount, and the combined effects of defects have been studied. An interesting beat phenomenon is observed when all the wheels have imperfections. A procedure to determine the type of imperfections in the tyre from the results of the test rig has also been proposed.     

斜拉索风雨振研究现状和尚待解决的问题

斜拉索风雨振严重威胁斜拉桥的安全，是研究热点之一。综合叙述了风雨振的危害，介绍了包括现场观测、风洞试验、理论分析、数值流体计算等研究方法，说明了风雨振发生的可能机理，介绍了现有的控制振动的措施，以及尚待解决的问题，为该问题的进一步解决提供参考。     

轨下垫板刚度的时变特性及其影响研究

以WJ7-A型轨下垫板为对象,测试轨下胶垫刚度随服役时间的变化,分析垫板刚度的时变特性;然后以此为基础,建立车辆-轨道垂向耦合动力学模型,研究轨下胶垫时变特性对轮轨随机振动响应的影响规律。研究结果表明:随着服役时间的增长,轨下橡胶垫板的刚度将增大,2年后垫板刚度的增幅为13.91%;随着运营时间的增长,车体振动加速度变化微弱;轮轨力及扣件力的第二主频幅值增大并向高频移动,且扣件力变化更显著,线路运营2年时间后,扣件力第二主频向高频移动7.4 Hz,幅值增幅达到53.80%。建议定期抽样测试轨下胶垫刚度并及时更换性能老化垫板,降低轮轨垂向力和扣件力。     

城市轨道交通运营引起建筑物内振动超标治理研究

通过对隧道内、地面和建筑物内的振动测试,研究轨道结构形式、受振建筑与地铁线路距离、地层振动特性以及车辆状态对青岛嘉园居民区建筑物环境振动的影响。结果表明:造成青岛嘉园振动超标的原因是地铁列车运行引起的近场建筑物受迫振动,下行线梯形轨枕轨道起到了较好的减振作用,其引起的环境振动在标准限值内;上行线DTⅥ2扣件引起环境振动较下行线约大6 d B,且超过标准限值。在分析振动超标原因的基础上,提出了限速运行、扣件改造、分级提速的治理措施,最终将青岛嘉园建筑物环境振动控制在"特殊住宅区"65 d B的振动限值之内,解决了北京地铁大兴线青岛嘉园振动扰民问题。     

公路交通引起的地下深层土体振动实测及其衰减分析

为了研究公路交通荷载引起的振动随深度的衰减规律,分别对深度为5.5 m.19.5 m、34.5 m.39.5 m的孔中测点以及孔口附近地面测点进行了位移振动同步测试,并在时域和频域上分别对有车工况和无车工况下的实测数据进行了分析。结果表明:随着深度的增加,交通振动中的高频部分会迅速衰减.低频部分则衰减缓慢,铅垂方向位移衰减因子相比水平方向衰减因子衰减得更快;有车工况下,铅垂方向位移幅值在深度39.5 m处仅为地面的15%.振动衰减已很明显。     

船舶齿轮箱用磁流变弹性体动力吸振器的仿真研究

船舶齿轮箱是船舶动力装置的重要传动装置,同时齿轮箱振动又是船舶振动的主要振源之一。因此,对其安装有效的吸振装置很有必要。本文设计了一款用于齿轮箱吸振的磁流变弹性体动力吸振器模型,通过ANSYS软件对其进行不同激励电流下的模态分析和热力学分析。结果表明,该吸振器拥有较宽的移频特性,能够有效控制齿轮箱的振动,同时该模型在强制对流工况下工作性能较好。     

Parameter optimization and parametric deviation influence for shock resistance of double-stage vibration isolation system with limiters北大核心CSCD

［Objectives］For marine nuclear power plants, the relative displacement of the pump supported by a vibration isolation system should be strictly restricted. In order to improve the shock resistance of a vibration isolation system with displacement limiters, the parameter optimization and parametric deviation influence are studied. ［Methods］The theoretical model of a double-stage vibration isolation system with typical limiter parameters is established, the analysis of the shock response characteristics of the system is carried out using the direct integration method, the optimal limiter parameters are obtained using a genetic algorithm, and the influence of parameter deviation on the shock resistance of the system is studied. ［Results］Limiter parameters significantly affect the shock response characteristics of the vibration isolation system. The optimal limiter parameters improve the shock resistance of the system, but parameter deviation has a great influence on shock resistance. Based on the influence of parameter deviation, a deviation control strategy is proposed in which the elastic parameter should have a positive deviation and the gap parameter a negative deviation. The simulation results show that the proposed strategy can effectively alleviate the shock resistance degradation caused by deviation.［Conclusions］The results of this study can be used to guide the design, manufacturing and variation control of limiters for vibration isolation systems. © 2022 Journal of Clinical Hepatology. All rights reserved.     

美国气垫登陆艇推进垫升系统的改进与发展

介绍美国气垫登陆艇推进垫升系统在三十余年使用过程中遇到的问题及解决措施。随着艇装载量、耐波性、全寿命周期维护等总体性能和作战使用要求的提高以及主机功率不断增大,结合现代技术分析手段,推进垫升系统正不断改进优化。在广泛采用新技术及复合材料后,艇载重大量幅增加且耐波性有所提高。     

The effect of railway local irregularities on ground vibration

The environmental effects of ground-borne vibrations generated due to localised railway defects is a growing concern in urban areas. Frequency domain modelling approaches are well suited for predicting vibration levels on standard railway lines due to track periodicity. However, when considering individual, non-periodic, localised defects (e.g. a rail joint), frequency domain modelling becomes challenging. Therefore in this study, a previously validated, time domain, three-dimensional ground vibration prediction model is modified to analyse such defects. A range of different local (discontinuous) rail and wheel irregularity are mathematically modelled, including: rail joints, switches, crossings and wheel flats. Each is investigated using a sensitivity analysis, where defect size and vehicle speed is varied. To quantify the effect on railroad ground-borne vibration levels, a variety of exposure–response relationships are analysed, including: peak particle velocity, maximum weighted time-averaged velocity and weighted decibel velocity. It is shown that local irregularities cause a significant increase in vibration in comparison to a smooth track, and that the vibrations can propagate to greater distances from the line. Furthermore, the results show that step-down joints generate the highest levels of vibration, whereas wheel flats generate much lower levels. It is also found that defect size influences vibration levels, and larger defects cause greater vibration. Lastly, it is shown that for different defect types, train speed effects are complex, and may cause either an increase or decrease in vibration levels.     

悬索桥吊索高阶涡激振动及摆锤式MTMD减振技术研究

为了解大跨度悬索桥吊索出现的大幅高频振动现象,并进行减振,以国内某主跨1688 m的悬索桥为背景(最长吊索长184.6 m),基于理论方法和施工期吊索大幅高频振动实测结果,分析吊索的振动类型及参数(频率、阻尼比);提出一种摆锤式多重调谐质量阻尼器(MTMD,其由一定形状的锤头提供质量参数,由钢绞线提供刚度及阻尼参数),采用有限元和室内试验的方法,分析其振动特性,并进行实桥验证。结果表明:该桥吊索振动频率范围为5~25 Hz,阻尼比低,单个吊点的多根吊索易发生同相位的高阶涡激振动;摆锤式MTMD单个锤头具有2个控制主频,自身阻尼比约10%,具有位移放大作用,对高频振动的响应灵敏,在很宽的频率范围内具有很好的减振性能;摆锤式MTMD可有效增加吊索自身阻尼比,控制吊索高阶涡激振动,实测减振效果达到90%以上,具有很好的实用性。