基于DD6119K60客车流水槽优化设计

对近年来国内客车流水槽的结构、材料及造型方面存在的问题进行了分析，并给出了具体的设计方案。     

EXPERIMENTAL STUDY OF INFLUENCE OF LIQUID NITROGEN PRESERVATION ON ANTIGENICITY OF HUMAN HOMOGRAFT AORTIC VALVE

Ｈｏｍｏｇｒａｆｔａｏｒｔｉｃｖａｌｖｅ（ＨＡＶ）ｈａｓｂｅｅｎｕｓｅｄｉｎｃｌｉｎｉｃａｌｐｒａｃｔｉｃｅｆｏｒ３０ｙｅａｒｓ．Ｉｔｈａｓｓｈｏｗｅｄｍａｎｙｓｕｐｅｒｉｏｒｉｔｉｅｓｃｏｍｐａｒｅｄｗｉｔｈｍｅｃｈａｎｉｃａｌｖａｌｖｅａｎｄｈｅｔｅｒｏ－ｔｉｓｓｕｅｇｒａｆｔｓ．ＨＡＶｉｓａｎａｔｕｒａｌｖａｌｖｅ．Ｉｔｓｈｉｓｔｏｌｏｇｉｃａｌｓｔｒｕｃｔｕｒｅａｎｄｍｏｒｐｈｏｌｏｇｉｃａｌｆｕｎｃｔｉｏｎａｒｅｓｉｍｉｌａｒｔｏｎｏｒｍａｌｐｈｙｓｉｏｌｏｇｉｃａｌｓｉｔｕａｔｉｏｎ…     

浅谈对铝合金油箱端盖与壳体配合间隙的改进

铝合金油箱端盖在压型后,变形很大、外形尺寸较大、扭斜、不平整,难以达到装配要求,本文通过使用(自制专用)设备,对压型后的端盖施加外力,改变其外形,从而解决此问题。     

Improving the estimation of total and direction-based heavy-duty vehicle annual average daily traffic

Abstract

The estimation of annual average daily traffic (AADT) is an important parameter collected and maintained by all US departments of transportation. There have been many past research studies that have focused on ways to improve the estimation of AADT. This paper builds upon previous research and compares eight methods, both traditional and cluster-based methodologies, for aggregating monthly adjustment factors for heavy-duty vehicles (US Department of Transportation Federal Highway Administration (FHWA) vehicle classes 4–13). In addition to the direct comparison between the methodologies, the results from the analysis of variance show at the 95% confidence level that the four cluster-based methods produce statistically lower variance and coefficient of variation over the more traditional approaches. In addition to these findings – which are consistent with previous total volume studies – further analysis is performed to compare total heavy-duty monthly adjustment factors, both directions of traffic, with direction-based monthly adjustment factors. The final results show that the variance as well as the coefficient of variation improve on average by 25% when directional aggregate monthly adjustment factors are used instead of total direction.     

蜂巢式液冷电池模块传热特性的试验研究

为4 A·h的21700型锂离子电池研发了蜂巢式液冷电池模块,并通过搭建的试验平台测定其充/放电过程的传热特性。结果表明:在25℃环境温度下,0.5C恒流恒压充电和1C恒流放电过程中,电池模块的最大温差均被控制在2℃以内;40℃环境温度下,1C恒流放电过程中,当冷却液流量大于1 L/min时电池模块的最大温差能保持在所要求的5℃以内。说明蜂巢式液冷电池模块冷却性能优良,可为未来电池热管理方案的设计提供技术支撑。     

关于整体式油箱盖涂装限位辅具的开发及应用

对于整体式式油箱盖结构,油箱盖处于常开状态。白车身入涂经过自动机喷涂段,机器人旋杯会与油箱盖外板发生碰撞,导致车辆无法正常通过。文章以奇瑞某款SUV车型为基础,介绍一款新开发的整体式油箱盖限位辅具,结构简单,使用便捷,并满足车间批量使用。     

盾构机工业水循环系统设计

为了解决目前盾构机主驱动电机及液压系统等发热设备的冷却问题,通过对用水系统的热平衡计算,对水泵和热交换器的选型及管路系统的设计等进行了简单描述和总结,设计出开闭式相结合的盾构机工业用水系统,用于关键设备的冷却和盾构机的日常掘进用水,冷却效果明显,目前广泛应用于日立盾构机施工。     

环氧沥青洒布车的研制与应用

文章基于环氧沥青洒布车研制历程,针对环氧沥青桥面防水粘结层施工的特殊性,介绍了环氧沥青洒布车的功能设计、结构特点及工作原理,分析了其技术优越性,为桥面防水粘结层施工机械的选用提供参考。     

重型载重车平衡悬架系统技术提升

由于重型载重车承载力大且使用工况恶劣,导致整车平衡悬架平衡轴总成在使用过程中平衡轴断裂、平衡轴支架产生裂纹等故障频发,严重影响客户正常使用,同时使得售后维修及索赔成本大大增加。文章针对平衡轴总成在使用过程中的失效模式,对重型载重车的平衡悬架系统进行技术提升,在原有技术及结构基础上,设计了一种新结构平衡轴总成,从而大大降低了平衡轴总成故障率,最大程度的提高了平衡轴总成使用寿命。     

船用液货控制系统设计

介绍了一种液货船的计算机集成控制系统架构。该架构将液货船液货系统和压载控制纳入统一的智能化管理平台中,实现了液货船的高度智能化。