旧水泥混凝土路面注浆技术研究与实践

在水泥混凝土路面基础上加铺沥青混凝土路面时 ,对现有板块破损的处理十分关键 ,而其中又以板块的脱空处治为最。板底注浆是处理板块脱空常用且有效的方法 ,本文就注浆技术的原理、材料的选择、配比试验及施工实践等作了较详尽的介绍     

防抱制动系统基于模型的最佳滑移率计算方法

提出了一种基于μ-λ曲线的近似数学模型来实现最佳滑移率的递推最小二乘算法(RLS)。应用累积求和统计控制法(CUSUM)，解决了RLS算法在检测跃变路面时响应滞后的问题。通过计算机仿真，验证了算法在车辆防抱制动系统中的可行性和有效性。     

车用LPG电控发动机排放控制的研究

文中所研究的LPG发动机电控系统综合利用了下列控制策略：基于步进电机步数的LPG燃料精确预控制与空燃比闭环控制；优化发动机起动后及暖机过程的空燃比控制；通过提高怠速及推迟点火的催化器快速起燃控制；通过氧传感器的加热以快速实现发动机起动后的空燃比闭环控制。并对1．8L汽油发动机进行了匹配试验，在兼顾发动机动力性及经济性的前提下有害气体排放达到欧Ⅱ法规的50％。     

发动机转速的应用研究

随着就车检测诊断技术的发展和发动机瞬时转速检测技术的提高，对发动机转速的检测已经成为检测发动机性能，诊断发动机故障的手段。在大量试验和分析的基础上，提出了应用发动机转速作为主要判据的设想。     

变带速干线协调控制模型研究

建立了以绿波带宽度为目标函数、以时差为决策变量的变带速干线协调控制的数学模型。模型中以各交叉口可以为绿波带提供的绿时最大为分解目标,以各交叉口间上下行实测自由行驶时间代替以平均车速计算的交叉口间行驶时间,大大地提高了绿波控制的效率。     

非港湾式公交停车对道路交通流的影响分析

公交车进出站点不仅影响本身,也给其他车辆运行带来很大干扰。文章首先比较全面地分析非港湾式公交停车影响下道路交通流特征,然后借助于EXCEL软件,构建关于公交停车频率、公交停车时间、最大公交停车长度及其存在时间、道路流量的车速和车头时距多元线性模型,并进行了严格的数学检验。该研究为合理分析路段交通流状况、正确计算区间行驶车速与车头时距提供了依据。     

Fitness-for-purpose assessment of cracked offshore wind turbine monopile

In this paper, the procedure for flaw acceptability assessment is examined through a case study of a semi-elliptical surface crack in an offshore monopile as it grows till it forms a through thickness crack. Using the procedure prescribed in an industrial standard (BS 7910), the fracture ratio, K_r is shown to increase monotonically with increasing crack depth. The load ratio, L_r, is initially insensitive to the crack depth. However, there is a rapid increase in L_r when the crack depth to thickness ratio exceeds 80%. L_r values obtained from detailed 3D FE limit analysis using elastic-perfectly-plastic material behaviour do not exhibit the asymptotic behaviour predicted by BS 7910 as the flaw transitions from deep crack to through-thickness crack. Furthermore, K_r predicted by BS 7910 is shown to be an over-estimation for the typical dimensions of offshore monopiles. The findings suggest that a structure with a deep flaw may be identified as unacceptable based on BS 7910 when it may still possess a non-trivial amount of structural residual life. This is a concern for monopiles where crack growth as a large flaw forms a significant part of the total life.     

汽车高压线束中高压端子的压接性能分析

高压线束是新能源汽车动力和信号传输分配系统的重要载体,高压线束端子的压接性能是新能源汽车最重要的性能指标。论文针对新能源汽车高压线束端子压接性能建立数据分析模型,通过分析相关数据,找出高压线束端子压缩比的最佳适配范围,以提高高压线束冷压接的工艺能力和质量水平。     

Centrifuge modelling of pipe-soil interaction in clay with crust layer

Seabed in regions, such as the Gulf of Guinea and North West Shelf of Australia, may exhibit a crust layer where the undrained shear strength can be an order of magnitude higher than that of the immediately underlying sediment. This can complicate design of steel catenary risers, where fatigue depends on the cyclic vertical stiffness of the pipe-soil interaction. Potential punch-through of the riser into the underlying soft soil may invalidate design assumptions based on the pipe-soil stiffness within the crust layer. The long-term evolution of pipe-soil stiffness within the crust layer, which exhibits similar properties to an over-consolidated soil, is also poorly understood. This paper describes centrifuge model tests undertaken in a clay sample with a crust layer, simulating the punch-through process of a pipe under load control and investigating the pipe-soil stiffness during long-term cyclic loading tests under displacement control. Results confirm that the potential for punching-through the crust layer depends strongly on the relative ratio of pipe diameter to crust layer thickness. The long-term evolution of pipe-soil stiffness showed a steady increase after an initial remoulding stage in contractile soils (normally consolidated and lightly over-consolidated), but a steady reduction in the heavily over-consolidated, more dilatant, crust. The magnitude of pipe-soil stiffness changes (during both remoulding and reconsolidation) is governed by the over-consolidation ratio of the soil and the amplitude of the cyclic displacements. This study provides insights on the relevant cyclic stiffness to consider when assessing SCR fatigue life in over-consolidated soils and soils exhibiting a superficial crust layer.