轨道牵引辅助变流系统中变压器绝缘强度的研究

简述了电晕放电的产生机理,结合实际对HXD1电力机车130 kVA辅助变压器的绝缘结构进行了理论分析和计算,并用试验数据说明了绝缘结构的可靠性.     

HXD2型大功率交流传动货运电力机车牵引电传动系统

介绍HXD2型大功率交流传动货运电力机车牵引电传动系统的电气原理、技术参数、性能特点和结构组成,对牵引电传动系统的各关键部件和装置组成进行了详细的功能描述。     

国内外混合动力客车动力总成方案此较研究

简要介绍混合动力客车动力总成方案分类，重点介绍国内、外典型的混合动力客车动力总成方案；通过对国内、外方案动力总成方案的比较，提出推广我国混合动力客车的建议。     

电动燃油泵换向器磨损原因分析和解决方案

由于乙醇汽油的应用，电动燃油泵的铜换向器磨损加速，严重影响了该产品的寿命，本文对磨损加速的原因进行分析，并提出解决方案。     

乘用车后碰撞安全模拟与结构设计研究

针对我国乘用车后碰撞燃油系统安全要求的强制性标准,研究了乘用车后碰撞安全的一般设计方法。通过某车型三厢改两厢的改型开发案例,利用有限元分析方法,分析验证了改型车的燃油系统安全性。从中总结了乘用车后碰撞安全结构设计的一些原则与要点。     

Simulation study on the operating characteristics of a hybrid hydraulic passenger car with a power split transmission

In this paper, a hybrid hydraulic passenger car (HHPC) coupled with a power split continuously variable transmission (P-CVT) is proposed. This P-CVT is capable of splitting the power from the internal combustion engine into mechanical and hydraulic power flows. By adjusting the ratio of the mechanical power to hydraulic power, the P-CVT enables the transmission ratio to be changed continuously. Meanwhile, the P-CVT system can capture the braking energy and store it in the hydraulic accumulator for the next assistant driving. In order to quantitatively investigate the effect of applying P-CVT on improving the fuel economy and operating performance for the HHPC, a numerical simulation is conducted under typical city driving conditions. The simulation results demonstrate that, the P-CVT permits the engine to be run under a more efficient operating range. The total fuel consumption of the HHPC is reduced by 16.4% under the test conditions, compared with that of the original car.     

混合励磁电机的常见结构及原理

阐述了混合励磁电机的基本概念及分类,介绍了混合励磁电机的常见结构及原理。     

地铁车辆基地出入线一度停车再起动的平纵断面关系模型

从《地铁设计规范》相关条文规定出发,探讨车辆基地出入线列车一度停车再起动的平纵断面关系;分析列车在停车时、停车后和起动时等三种不同工况的受力情况。根据牵引计算原理,建立其平纵断面关系模型。以长沙市轨道交通2号线西延二期工程为例,计算出入线的最大坡度与最小曲线半径。     

考虑前后多车的网联自动驾驶车辆混流跟驰模型

随着中国新基建战略的提出及自动驾驶和网联通信技术的不断发展，网联自动驾驶车辆（CAV）、自动驾驶车辆（AV）和常规人驾车辆混行的交通流将在未来长时间存在。建立适用于网联自动驾驶车辆、自动驾驶车辆和常规人驾车辆3种类型车辆的混流跟驰模型，考虑多前后车车头间距、多前车速度差、加速度差、与主体车辆的相对距离等因素，并进行典型场景的数值仿真。刹车和起步过程的3种混流数值仿真结果显示，模型在几种典型混行场景下均具有可行性，车辆的加速度和速度变化更为平缓。不同CAV比例下的数值仿真结果显示，车队中CAV比例越高，车队整体恢复至平稳状态的时间越短，波动幅度越小。CAV均质流数值仿真结果表明，与MHVAD模型相比，该模型不稳定区域减小33.8%，所控制的车队速度波动幅度减小14%。CAV与AV混流的数值仿真结果显示，与PATH实验室模型相比，由该模型控制的车队加速度进入相对稳定状态提前5.5 s。该模型可用于不同车辆均质流及3种车辆混行的队列控制，在目前开展混行实车试验困难的情况下，也可应用该模型进行混行跟驰仿真，从而为混行交通流的道路交通管理及基础设施布设提供理论依据和模型支持。     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.