无线Ad-Hoc网络密钥分发和认证机制研究

针对Ad Hoc网络没有管理中心,资源受限等特点,解决了Ad-Hoc网络面临的新的安全问题,使Ad-Hoc网络得到更广泛的应用.结合基于身份加密和门限秘密共享两个基本理论,提出了一个适用于Ad-Hoc网络、没有管理中心的分布式密钥分发和认证方案.其优点是:减少了运算量,节省了存储空间和带宽,并无需在网络形成之前假设密钥已经分发完毕,从而有效解决了Ad-Hoc网络安全中密钥管理的问题.     

城市群双线客流分布预测方法研究

鉴于城市群客流预测在城市群轨道交通规划中的重要性,为提高其预测精度,对城市群客流预测中的分布预测方法进行研究.分析现实能够收集到的资料及城市群交通分布的特点,提出城市群双线分布预测方法.在城市群资料有限的情况下,研究如何得到城市群分布的预测结果;阐述分布预测的计算方法,建立相关的计算模型,对几种常用的分布预测模型进行优缺点及适用性分析.     

雾化液滴尺寸和速度分布函数的推导

为了增强雾化液滴质量和热量的传递,有效预测与评价喷雾质量,应用最大熵原理和动量守恒定律推导出了新的雾化液滴尺寸和速度的概率密度分布函数,包括数目分布函数、数目微分分布函数、体积分布函数、体积微分分布函数与总体积公式。当不考虑速度分布时,推导的喷雾液滴尺寸分布与曹建明先前推导的尺寸分布具有完全相同的形式,其分布函数是Nukiyama-Tanasawa型雾化液滴尺寸分布函数的一种特定形式,推导结果具有普适意义。     

沥青混合料油膜厚度计算方法

为了精确计算沥青混合料油膜厚度,考虑了矿粉粒度、沥青混合料压实程度和沥青比例的影响,采用HORIBA-300型激光散射粒度分布分析仪对矿粉的粒度进行测量,分析了矿粉粒度的尺寸范围,提出了沥青隔离膜的概念,建立了沥青油膜厚度计算模型。采用旋转压实仪成型沥青混凝土试件,对比分析了沥青油膜的计算值与实际测量值。分析结果表明:采用新的油膜公式反算的沥青用量范围为4.55%～4.85%,采用传统方法反算的沥青用量范围为4.20%～5.20%,而试验最佳沥青用量为4.70%,显然新方法精度高。     

TRIP DISTRIBUTION MODELLING USING FUZZY LOGIC AND A GENETIC ALGORITHM

This article examines possibilities for the application of soft computing techniques for the prediction of travel demand. The model, based on fuzzy logic and a genetic algorithm, successfully solves the trip distribution problem. The possibilities of using the proposed model in solving trip generation, modal split and route choice problems have also been indicated. The model has been tested on a real numerical example. Exceptionally good correspondences between estimated and real values of passenger flows have been obtained.     

Structural response of a flexible pipe with damaged tensile armor wires under pure tension

This article studies the structural response of a 6.0” flexible pipe under pure tension considering intact and damaged conditions. In the damaged condition, several wires of the tensile armor layers are assumed to be broken. A three-dimensional nonlinear finite element (FE) model devoted to analyze the local mechanical response of flexible pipes is employed in this study. This model is capable of representing each tensile armor wire and, therefore, localized defects, including total rupture, may be adequately represented. Results from experimental tests validate the FE predictions and indicate a reduction in the axial stiffness of the pipe, a non-uniform redistribution of forces among the remaining intact wires of the damaged tensile armor layers and high stress concentrations in the wires near the broken ones. Moreover, the FE model indicates that significant normal bending stresses may arise in the pressure armor and inner carcass due to an uneven pressure distribution on these layers. Finally, the results obtained are employed to estimate the pull out capacity of the studied flexible pipe.     

Design and evaluation of an integrated inventory and transportation system

This paper proposes the adoption of an integrated inventory and transportation system (IITS) to minimize the total costs of inventory and transportation. A non-linear programing is developed by analyzing transportation and inventory costs with one supplier and many retailers in the distribution environment. The paper compares the proposed model with the traditional approach in computing total costs with numerical data. The results indicate that the total costs can be optimized by adopting integrated programing rather than the traditional approach, along with achieving improved customer service levels. In particular, sensitivity analysis is applied to determine the performance of the IITS under various transportation costs, holding costs and shortage costs. It shows that the transportation cost per unit is most sensitive in the proposed model. In this situation, the IITS is more effective for cost saving when set-up cost, holding and shortage costs are high, but is less effective for situations involving high per-unit transportation costs.     

公路隧道供配电设计午若干问题探讨

针对公路隧道供配电系统设计中存在的一些问题，结合实际工程中供配电系统的设计、施工及运营管理经验进行简要分析，并就公路隧道供配电系统的设计提出具体意见和建议，供设计、施工人员参考     

物流配送中心服务能力仿真评价

通过描述和分析配送中心服务系统的功能和结构,构建了每天订单到达数量服从泊松分布、订单到达间隔时间服从指数分布、每次订货数量服从某一均值的正态分布的物流配送中心仿真模型,采用Java语言开发了仿真程序,并通过案例运行了该仿真模型,证明了该仿真系统对于评价物流配送中心服务能力的有效性.     

城市干道系统交通事故预测模型研究

以哈尔滨市干道路网为研究对象,收集到了该路网上468个路段和163个平面交叉口的道路交通数据,以及1999年至2004年所发生的8510起交通事故数据.分析了事故数据的统计分布特性,应用聚类分析技术确定了路段和交叉口的类别 ,并在此基础上分别建立了事故总体和分事故形态的预测模型.论文探讨了高峰时段的事故次数、事故率与路段v/c之间的定量关系.标定出了24个模型,并形成干道系统事故预测模型库.最后,运用所建立的事故预测模型选取了2010年哈尔滨规划路网的一部分进行实例分析,结果表明了预测模型是有效的.