基于湿度应力场理论的膨胀土边坡稳定分析

边坡土体中的膨胀力是导致膨胀土边坡失稳的主要原因之一。文章基于湿度应力场理论,采用ANSYS软件的热传导分析功能模拟分析边坡的降雨入渗以及膨胀变形,并采用有限元强度折减法对不同条件下边坡安全系数进行计算,分析了膨胀土边坡稳定规律,为膨胀土边坡处治提供理论依据。     

活断层错动位移下衬砌断面型式对隧道结构的影响

以棋盘石隧道为工程背景,采用有限元方法,设置五种不同仰拱半径的三心圆断面,对比研究了活动断层错动下不同衬砌断面型式对链式结构隧道受力及塑性变形的影响。结果表明:断层错动引起隧道二次衬砌受到拉张、剪切、挤压组合作用;断层错动引起的高应力带主要在断层带内的节段拱脚位置,且峰值位于上盘,剪切缝能有效地吸收断层错动产生的拉应力;在隧道断面不断趋向正圆的过程中,二次衬砌最大主应力、最小主应力、剪应力均呈减小趋势,等效塑性应变呈增大趋势。     

大跨度连续刚构桥施工期截面应力测试与分析

广西布柳河大桥主桥为主跨235m、墩高97米、桥宽仅8.3米的特柔预应力混凝土连续刚构桥。文章结合主桥施工监控实践,介绍大跨高墩连续刚构桥施工期截面应力测试及数据分析的方法,为同类桥型施工提供参考。     

高烈度地震区公路隧道洞口段地震响应分析

根据隧道地震安全性评价报告和地勘资料,建立了三维数值计算模型并采用一致粘弹性人工边界模拟动力边界,对高烈度地震区公路隧道洞口段进行了瞬态动力计算。计算结果表明:在三向地震荷载激励下,洞口段衬砌的地震响应具有明显滞后性,衬砌以水平横向振动为主、轴向振动次之、竖向振动最弱;洞口段衬砌的拱腰部位将承受极大拉应力和剪应力,可设减震层吸收地震能量。通过对衬砌相对位移的分析得出,衬砌横向和轴向变形都很小,衬砌稳定性尚好。     

圆柱分支管Y型三通相贯线的计算及应力集中区域

建立了圆柱分支管Y型三通的主管相贯线处的周长不变的条件 ,确定了相贯线为椭圆。给出了由已知主管相贯线处直径确定分支管直径和椭圆周长或反向求解的计算公式 ,讨论了精度。并用ANSYS程序计算确定了应力集中的区域。     

九曲河大桥加固工程施工监控技术研究

桥梁施工监控在桥梁建设及加固改造工程中是必不可少的一部分,监控可以对桥梁线形及内力、挠度情况进行实时反馈,严格把关,保证与设计一致。文章以九曲河大桥加固工程为背景,结合加固改造设计方案,从线形控制、变形监测与应力监测等方面阐述了施工监控技术及效果。     

Design and evaluation of an integrated inventory and transportation system

This paper proposes the adoption of an integrated inventory and transportation system (IITS) to minimize the total costs of inventory and transportation. A non-linear programing is developed by analyzing transportation and inventory costs with one supplier and many retailers in the distribution environment. The paper compares the proposed model with the traditional approach in computing total costs with numerical data. The results indicate that the total costs can be optimized by adopting integrated programing rather than the traditional approach, along with achieving improved customer service levels. In particular, sensitivity analysis is applied to determine the performance of the IITS under various transportation costs, holding costs and shortage costs. It shows that the transportation cost per unit is most sensitive in the proposed model. In this situation, the IITS is more effective for cost saving when set-up cost, holding and shortage costs are high, but is less effective for situations involving high per-unit transportation costs.     

Cooperation in transit delivery in West German metropolitan areas

West Germany is densely populated, averaging 245 inhabitants/km², but varying widely between urban agglomerations and rural areas. Transport volume has increased by 40% since 1970, with virtually all growth due to private automobiles. Since 1981 public transit has been suffering from decreasing demand.A 1964 Expert's Report to the German federal government was the stimulus for initiating an effective funding mechanism for new public transit construction. In 1965 Germany's first federated transit authority was founded for the region of Hamburg.Principal among the goals of any cooperative agreement among transit companies are improvements for the passengers and improvement of revenues for the companies. To attain these ends, two distinct forms of transit aggrements have been developed in Germany: transit cooperative (Verkehrsgemeinschaft) and transit federation (Verkehrsverbund). The former is more suitable for smaller to medium-sized towns, while the latter is more suitable for larger cities. The two types are described in this article.German transit federations during the 1970s succeeded in significantly increasing ridership, while during the 1980s patronage has either remained steady or has declined. Yet transit federations showed much better perfomance than did public transit in general. In terms of costs and revenues, no public transit organization in Germany is able to break even; deficits vary between 42% and 55%. The author concludes, however, that hidden subsidies for automobile traffic are far higher, because of environmental damage and the high social cost of traffic accidents.     

基于结点重要度理论的运输枢纽布局方法研究

在公路运输枢纽总体规划中,枢纽的选址是重要的一环,也是决定区域公路运输系统的重要因素。结点重要度分析是定量描述区域内各结点间的相对重要程度,从而为规划布局提供依据。将结点重要度理论引入公路运输枢纽布局,根据提出的相关指标应用结点重要度分析对枢纽布局备选点逐步筛选,最终确定最佳站址,从而指导运输枢纽的布局。所阐述的方法在部分公路运输枢纽总体规划中收到了良好的效果。     

城市快速路辅路功能定位分析及设计标准

该文结合我国城市快速路发展实际,分析了城市快速路辅路在规划设计层面的一些基本问题,提出快速路辅路基本职能分三种:服务职能、集散职能、通道职能。辅路因设置目的不同及所承担的任务不同,可划分为不同的类型,即标准服务型、集散型、服务-集散型、综合通道型。每一种类型又都具有各自不同的交通功能及选型条件,以及相应的设计标准和建设规模。该文还结合典型的案例进行了说明。