悬浮结构铁路信号设备雷击损坏的原因分析及防护方法探讨

很多铁路信号系统,特别是轨道电路的发送、接收和CAN总线均采用悬浮结构。为了防止出现第三轨问题,雷电防护方案中只加装差模(横向)防护用SPD,共模(纵向)防护是靠系统绝缘特性来承担。可是在实际应用中出现雷击损坏现象多是因为缺少共模防护。通过科研试验数据和现场雷害调查结果,综合分析该类悬浮系统共模雷击损坏特点,并针对防止出现第三轨问题,提出新的共模雷电防护方案供大家参考。     

键合图理论在汽车纵向角振动主动控制中的应用

本文应用键合图理论建立了汽车5自由度振动系统的键图模型并推导出状态方程，以垂直振动、纵向角振动能量最小和控制能量最小为目标函数，利用状态反馈原理代化出前悬架减振器的最佳控制力，对汽车驶过三角形单凸起时的振动响应进行了计算机仿真分析。结果表明，具有主动控制悬架的汽车，其纵向角振动得到明显的衰减。     

多刚体系统动力学在汽车转向和悬架系统运动分析中的应用

多刚体系统动力学是近２０年发展起来的力学新分支。本文以该领域中的Ｒ－Ｗ方法为理论基础，编制了可自动建模半进行计算机值仿真计算的汽车转向，悬架运动分析通用程度，运用该程度对大量的实车进行了计算分析，经整车和转向悬架系统的试验结果表明，用该程序进行汽车转向，悬架运动分析，所得结果准确，计算迅速，可方便地进行转向，悬架设计方案的比较和参数的选择。     

Understanding the limitations of different vehicle models for roll dynamics studies

An accurate and realistic vehicle model is essential for the development of effective vehicle control systems. Many different vehicle models have been developed for use in various vehicle control systems. The complexity of these models and the assumptions made in their development depend on their application. This article looks into the development and validity of vehicle models for prediction of roll behavior and their suitability for application in roll control systems. A 14 DOF vehicle model that includes dynamics of roll center and nonlinear effects due to vehicle geometry changes is developed. The limitations, validity of simplified equations, and various modeling assumptions are discussed by analyzing their effect on the model roll responses in various vehicle maneuvers. A formulation of the popular 8 DOF vehicle model that gives good correlation with the 14 DOF model is presented. The possible limitations of the 14 DOF model compared with an actual vehicle are also discussed.     

悬浮聚合分散剂——活性磷酸钙

活性磷酸钙(HAP)可用作悬浮聚合分散剂,本文讨论和分析了HAP的分散机理和有关合成工艺,指出了HAP悬浮分散剂的发展方向。     

汽车悬架多刚体动力学分析及九点控制

汽车机械系统的建模、分析与求解始终是动力学的关键问题,为快速准确地求解分析,文章借助多刚体系统动力学的拉格朗日法对汽车悬架进行分析,建立了基于多刚体系统动力学的主动悬架系统模型,并采用九点控制策略进行了理论分析和计算机仿真。仿真结果表明,以多刚体动力学方法同九点控制策略相结合的汽车悬架系统性能良好。     

基于Matlab/GUI的汽车扭杆弹簧悬架设计

针对扭杆弹簧悬架的设计计算过程繁琐复杂及计算量大的问题,基于扭杆弹簧悬架设计的应用实际,按照布置形式与结构形式的不同进行了扭杆弹簧的设计计算,利用Matlab/GUI模块将设计过程程序化,建立出相应的GUI界面,使设计过程通用化。通过实例运行显示出Matlab软件界面具有很强的实用性。该方法可以方便地进行重复设计,极大提高了工作效率。     

基于模糊控制的车辆电控空气悬架系统研究

针对汽车车辆的空气悬架系统作了理论分析和计算机仿真研究,首先运用ADAMS建立了悬架的动力学模型和控制系统模型;然后运用模糊控制器对汽车空气悬架系统进行了模糊控制;对所创建的模型进行了SIMULINK仿真,取得了良好的仿真效果。     

Biochemical composition of marine sediment from the eastern Weddell Sea (Antarctica): High nutritive value in a high benthic-biomass environment

Within the SCAR's international EASIZ programme, as part of the benthic–pelagic coupling experiment, grain size and organic matter contents in marine surface sediment were measured. Samples were taken during the austral autumn of 2000 from 3 regions in the eastern Weddell Sea: Kapp Norvegia, Four Seasons Bank, and Austasen.In general, sediments were fine sand with a grain size fraction < 200 μm representing more than 40% of the total weight. The sediments from Four Seasons Bank (64 to 107 m depth) were coarser than those from Austasen and Kapp Norvegia (209 to 480 m depth), presumably due to winnowing of fine sediment at shallow depths. Organic carbon (OC) content ranged from 0.25% to 1.2% and constituted 10% to 97% of the total carbon. The samples from Kapp Norvegia presented the highest OC values. Overall, protein (PRT), lipid (LPD), and carbohydrate (CHO) contents were similar to those in sediment from cold regions (e.g., the North Atlantic and the Ross Sea) but higher than those in sediment from other Antarctic and more septentrional regions (e.g., the Ross Sea and the Mediterranean). The difference within the Antarctic is explained through the local conditions in Terra Nova Bay and Kapp Norvegia. In the Antarctic, PRT and LPD carbon were the main contributors to the biopolymeric carbon (BPC). In the eastern Weddell Sea shelf, the BPC accounted for more than 90% of the OC in most of the samples. More than 82% of the total PRT, LPD, and CHO were present in the fraction < 200 μm. This work remarks the existence of sediments with a high nutritional value persistent several weeks after the spring–summer pulse of fresh organic matter. It is also highlighted the high potential availability of these sediments (due to its grain size) for the benthic communities inhabiting this high-latitude continental shelf.     

某自卸车转向与悬架干涉的ADAMS校核和优化设计

汽车设计中通常采用平面作图法校核转向与悬架干涉量,但该方法有一定缺点。本文结合某自卸车的方案布置,探索运用ADAMS/View软件对转向与悬架干涉量进行校核和优化设计的方法。以车轮跳动引起的转向与悬架干涉量最小为优化目标,对转向垂臂的布置位置进行了优化,并对制动引起的转向与悬架干涉量进行了校核。按照优化结果进行布置,可得到理想的转向、悬架协调运动关系。