现场总线式调速控制系统的结构及原理

介绍现场总线式调速控制系统的结构及原理,分析了该系统的技术特点及性能指标。     

成本管理是铁路施工企业项目管理的关键

当前及今后一段时期,国内建筑市场的竞争将日趋激烈,从确保材料质量和严格控制消耗数量,加强机械设备的配置和使用,认真做好经济比较和核算管理等方面,主要阐述了加强项目的成本考核和内部经济核算的观点和主要措施。     

地铁车站大客流组织措施研究

针对地铁车站大客流组织问题,以天津地铁营口道站为具体研究对象,结合实际运营经验,对大客流组织原则、影响因素和应对措施进行较全面的探讨。首先,结合营口道站实际运营情况和一线工作经验,总结地铁车站的大客流组织原则;其次,从乘客乘坐地铁的流程入手,详细分析影响车站大客流组织的主要影响因素,定量化计算AFC系统服务能力、出入口及通道的通过能力、楼扶梯的通过能力、站台乘候车秩序？、列车运能和客流疏导能力等;最后,遵循大客流组织原则,针对影响大客流组织的主要因素,从客流预测、客流组织、行车调度和票务组织等方面提出具体的大客流组织应对措施。     

高速公路沥青路面施工质量控制分析

无接缝、平整、行车舒适、噪音低以及振动小、易于养护等优点,使沥青混凝土路面成为我国国内公路面层普遍采用的一种比较好的结构形式。但是如果施工中不能按照施工工艺严格的进行施工质量控制,则很容易导致路面的一系列质量问题,这不仅影响使用功能,还影响影响其社会效益。     

����GA¬¬-BP�ĸ��ٹ�·����ѵ�ģ������������о�

鉴于模糊神经网络具有良好的非线性特性、学习能力、自适应能力和抗干扰能力,本文将模糊神经网络技术引入到高速公路入口匝道控制中。提出一种基于GA和BP算法的模糊神经网络控制器,并对控制器进行了详细设计。设计过程主要分为三部分：输入输出参数的选择、模糊神经网络的结构设计以及基于GA-BP的学习算法设计。最后,使用MATLAB软件对其进行了仿真。仿真结果表明,本文提出的方法是有效的,较之基于BP的模糊神经网络控制和ALINEA控制,能更好地稳定主线交通流密度。     

宝马车系诊断设备及电控发动机的重点组成部件

介绍宝马发动机电控系统诊断信息、车间诊断设备、电控发动机的重点组成部件。     

Fuzzy and adaptive fuzzy control for the automobiles’ active suspension system

Two typical criteria for good vehicle suspension performance are their ability to provide good road handling and increased passenger comfort. The main disturbance affecting these two criteria is terrain irregularities. Active suspension control systems reduce these undesirable effects by isolating car body motion from vibrations at the wheels. This paper describes fuzzy and adaptive fuzzy control (AFC) schemes for the automobile active suspension system (ASS). The design objective is to provide smooth vertical motion so as to achieve the road holding and riding comfort over a wide range of road profiles. The efficacy of the proposed control schemes is demonstrated via simulations. With respect to the optimal linear quadratic regulator (LQR), it is shown that superior results have been achieved by the AFC.     

Optimal roll control of an articulated vehicle: theory and model validation

This paper investigates optimal roll control of an experimental articulated vehicle. The test vehicle and the mathematical model used to design the control strategies are presented. The vehicle model is validated against experimental data from the test vehicle in passive configuration. The initial controller design, performed by Sampson (Sampson, D.J.M. and Cebon, D., 2003a, Achievable roll stability of heavy road vehicles. Proc. Instn. Mech. Engrs, Part D, J. Automobile Engineering, 217(4), 269–287), is reviewed and adapted for the experimental vehicle. The effect of not controlling all the axles on the vehicle is investigated and a variable vehicle speed controller is designed by interpolating between constant speed controllers. Substantial reduction in normalized load transfer is achieved for a range of manoeuvres, both in steady-state and transient conditions.     

Fault tolerant nonlinear control with applications to an automated transit bus

This paper presents an integrated structure for a passive and active fault tolerant control (FTC) design approach in the framework of a robust nonlinear control technique called Dynamic Surface Control (DSC). As motivated by the automated vehicle application, we consider two categories of possible faults: pre-specified (a priori) and non-specified faults. It is first shown that DSC can be considered as a passive FTC approach in the sense that it gives simultaneous robust stability to a set of nonlinear systems even in the presence of model uncertainties and the pre-specified faults. Then, the non-specified fault is classified depending on the fault’s impact on the closed-loop system and isolatability from a fault detection and diagnosis (FDD) system. If a fault is both intolerable and isolatable, an active FTC approach is taken which includes FDD and controller reconfiguration. More specifically, trajectory reconfiguration is considered to accommodate the actuator fault, i.e., to compensate for the performance loss due to the fault within the framework of a switched hierarchical structure. Finally, the integrated structure for the longitudinal control of an automated transit bus is designed through the proposed method. Simulation results of the fault tolerant controller are shown for both single and multiple multiplicative faults. This controller was implemented on the California PATH transit buses in a demonstration of automated public transportation technology in San Diego, California in August of 2003.     

Heavy duty vehicle rollover detection and active roll control

This paper presents the results of a comprehensive study on heavy-duty vehicle (HDV) roll stability improvement technology. The proposed rollover threat warning system uses the real-time dynamic model-based time-to-rollover (TTR) metric as a basis for online rollover detections. Its feasibility for implementation in a HDV rollover threat detection system is demonstrated through vehicle dynamic simulation studies. The research on the development of a rollover threat detection system is further enhanced in combination with an active roll control system using active suspension mechanism to improve heavy-duty trucks’ roll stability both in the static cornering and in emergency maneuvers. It has been demonstrated that the roll stability of typical heavy-duty trucks has been largely improved by the proposed active safety monitoring and control system.