非对称建筑荷载作用下小净距隧道施工模拟分析

在非对称建筑荷载作用下,采用CRD法和预留核心土弧形导坑法两种施工开挖方案,对小净距隧道的施工过程进行了数值模拟研究.对两种施工方案的洞室周边竖向变形、地中围岩变形和洞室周边的围岩应力进行了对比分析,揭示了非对称建筑荷载作用下两种方案的洞室周边竖向变形规律和变形规律的相似性,获得了地中围岩变形的变化规律,对信息化反馈施工,指出了必须重点监控与关注的位置.     

An inverse finite element method for the analysis of VIV data

This paper presents an algorithm for the frequency domain solution of dynamic linear “inverse” problems, that is for the processing of measurement data (strain, acceleration etc.) acquired on a mechanical structure, in order to estimate the loads acting on the structure and its corresponding response. The problem is formulated as a constrained (force equilibrium) optimization (small deviations from measurements, small loads) problem, which is transformed into an unconstrained problem, then into differential equations. The algorithm is applied to the estimation of hydrodynamic forces induced by the shedding of vortices from an offshore oil riser.     

地铁盾构隧道沿线障碍桩冲桩破除施工技术

通过西安地铁二号线盾构区间隧道穿越障碍桩的工程案例,对4种废弃障碍桩的处理工艺的优缺点进行对比,确定采用"基坑开挖+冲桩"的方法,并介绍冲桩施工的要点以及关键技术措施。采用的施工方案施工效果明显：工序简单、容易操作、工期短;工序相对安全,工艺可靠。所得以验可供今后类似工程借鉴参考。     

浅析G30线K3981～K3982路段防沙害处治方法

结合博乐公路管理局管养的G30线K3981～K3982路段路基边坡防沙害处治养护项目的实施,对处治沙害实施流程进行了详细的阐述,有一定的参考价值。     

地铁车站大客流组织措施研究

针对地铁车站大客流组织问题,以天津地铁营口道站为具体研究对象,结合实际运营经验,对大客流组织原则、影响因素和应对措施进行较全面的探讨。首先,结合营口道站实际运营情况和一线工作经验,总结地铁车站的大客流组织原则;其次,从乘客乘坐地铁的流程入手,详细分析影响车站大客流组织的主要影响因素,定量化计算AFC系统服务能力、出入口及通道的通过能力、楼扶梯的通过能力、站台乘候车秩序？、列车运能和客流疏导能力等;最后,遵循大客流组织原则,针对影响大客流组织的主要因素,从客流预测、客流组织、行车调度和票务组织等方面提出具体的大客流组织应对措施。     

液压转向系统冷启动沉故障机理及测试方法研究

液压转向系统冷启动沉故障在北方冬季是比较常见的一个故障,论文针对故障产生的机理进行了深入分析,并对产生故障的常见原因及改进方法进行了简单介绍,最后对如何确定故障源从测试方面提供了方法.     

Indirect method for wheel–rail force measurement and derailment evaluation

Wheel set flange derailment criteria for railway vehicles are derived and the influence of wheel–rail contact parameters is studied. An indirect method for wheel–rail force measurement based on these derailment evaluation criteria is proposed. Laboratory tests for the calibration of strain–force devices on the bearing box are carried out to determine the relationship between the applied force and the measured strain. The simulation package, SIMPACK, is used to develop a passenger car model to generate wheel–rail forces and vibration signals. Different cases are considered in this model to provide an accurate validation of the identified wheel–rail forces. A feasibility test is conducted in the Beijing Loop test line using a passenger car equipped with a set of strain gauges on the wheel set. The comparison of the force time history applied to the instrumented wheel set and that obtained using the indirect method is presented.     

网络计划工期－费用的动态规划决策

关键路线法中网络计划工期－费用优化，可以化为一系列单阶段决策，构成确定性离散优化决策问题，本文试用动态规划处理这一过程。     

有限体积法在一维平底溃坝问题研究中的应用

以一维平底溃坝问题为例,讨论了有限体积法的应用。从溃坝基本方程入手,采用Roe方法计算界面数值通量,采用空间一阶、时间二阶格式（预测校正二步格式）计算溃坝问题,得到了满意的结果。     

含酚废水处理工艺综述

含酚废水是一种常见的工业废水，本文分别阐述了萃取、SBR、湿式氧化几种典型工艺处理含酚废水的试验情况，归纳出不同含酚废水合适的处理工艺。