基于磨损元素比例特征的发动机磨损状态诊断

针对不连续采样时的车用发动机磨损故障诊断问题,基于摩擦磨损原理和摩擦副元素之间的相关性,提出了基于比例特征的发动机磨损状态模糊优选诊断方法,建立了发动机磨损变化的比例模型,研究了摩擦副主要磨损元素之间在磨损过程中的比例关系,运用模糊优选理论实现了发动机磨损状态的诊断。通过典型磨损状态的油样光谱分析数据验证了该诊断方法的有效性,解决了车用发动机在不连续采样情况下的磨损故障诊断难题。     

摩托车轮胎碰撞分析

当摩托车发生碰撞时,前轮胎首先接受到冲击反作用力,这个力将对摩托车运行和骑乘者产生非常严重的后果。通过建立摩托车轮胎有限元模型来模拟摩托车轮胎的碰撞情况,将摩托车前轮胎受到的反作用力十分精确地计算出来,从而进行研究和分析。     

Tractor-semitrailer model for vehicles carrying liquids

This article presents a model for solving solid-fluid interactions in vehicles carrying liquids. A tractor-semitrailer model is developed by incorporating suspension systems and tire dynamics. Owing to the solid-fluid interaction, equations of motion for the vehicle system are coupled. To simplify the complicated solution procedure, the coupled equations are solved separately using two different codes. Each code is analyzed separately; but as the parameters of the two codes depend on each other, the codes must be connected at the end of each time step. To determine the dynamic behavior of the system, different braking moments are applied. As the braking moments increase, braking time decreases. However, it turns out that increasing the braking moment to more than a certain level produces no significant results. It is also shown that vehicles carrying fluids need a greater amount of braking moments in comparison to vehicles carrying solids during braking. In addition, as the level of the fluid inside the tanker increases, from one-third to two-third of the tanker's volume, the sloshing forces applied to the tanker's walls increase. It was also concluded that the strategy used in this article to solve for the solid-fluid interaction by incorporating vehicle dynamic effects represents an effective method for determining the dynamic behavior of vehicles carrying fluids in other critical maneuvers.     

FEM/BEM在轮胎振动和噪声特性分析中的应用

基于ABAQUS和SYSNOISE程序,给出了分析轮胎振动和噪声特性的有限元和边界元模型及完整方法（FEM/BEM）,并以此模型和方法对某半钢子午胎进行了模态分析,计算其在激励作用下的辐射声场.计算结果表明,只要有通过试验获得的轮胎在滚动过程中所受到的真实激励谱,利用本文的方法即可对轮胎的振动噪声进行预报.     

大侧偏角下侧偏松弛长度特性的研究

本文在稳态指数统一模型和一阶线性微分方程的基础上，研究了大侧偏角下动态过程中侧偏松弛长度的特性。侧偏松弛长度是由轮胎的侧向弹性决定的。在大侧偏角下，侧偏松弛长度不再是一个常数，而是随着侧向有效滑移率的改变而改变，而且它们之间呈现非线性特性。深入了解侧偏松弛长度的特性对研究轮胎动态特性和建立轮胎动态模型具有重要的作用。     

Economic analysis of ride-sourcing markets

Ride-sourcing refers to an emerging urban mobility service that private car owners drive their own vehicles to provide for-hire rides. This paper analyzes the ride-sourcing market using an aggregate model where the matchings between customers and drivers are captured by an exogenous matching function. It is found that without any regulatory intervention a monopoly ride-sourcing platform will maximize the joint profit with its drivers. On the other hand, the first-best solution is not sustainable when the matching function exhibits increasing returns to scale and the cost function of the platform is subject to economies of scale. Regardless of the examined market scenarios, the average waiting time of customers is proportional to the average searching time of drivers. We establish conditions for regulators to solely regulate the commission charged by the platform to guarantee the second-best. We further investigate the competition of ride-sourcing platforms and find that competition does not necessarily lower the price level or improve social welfare. In the latter case, regulators may rather encourage the merger of the platforms and regulate them directly as a monopolist.     

Enhancing grey prediction fuzzy controller for active suspension systems

A grey prediction fuzzy controller (GPFC) was proposed to control an active suspension system and evaluate its control performance. The GPFC employed the grey prediction algorithm to predict the position output error of the sprung mass and the error change as input variables of the traditional fuzzy controller (TFC) in controlling the suspension system to suppress the vibration and the acceleration amplitudes of the sprung mass for improving the ride comfort of the TFC used; however, the TFC or GPFC was employed to control the suspension system, resulting in a large tire deflection so that the road-holding ability in the vehicle becomes worse than with the original passive control strategy. To overcome the problem, this work developed an enhancing grey prediction fuzzy controller (EGPFC) that not only had the original GPFC property but also introduced the tire dynamic effect into the controller design, also using the grey prediction algorithm to predict the next tire deflection error and the error change as input variables of another TFC, to control the suspension system for enhancing the road-holding capability of the vehicle. The EGPFC has better control performances in suppressing the vibration and the acceleration amplitudes of the sprung mass to improve the ride quality and in reducing the tire deflection to enhance the road-holding ability of the vehicle, than both TFC and GPFC, as confirmed by experimental results.     

高速公路加铺热拌超薄磨耗层级配设计研究

热拌超薄磨耗层是公路预防性养护的有效技术之一，基于某高速超薄磨耗层预防性养护工程，对不同级配进行路用性能试验研究。结果表明，不同级配混合料孔隙率随着2.36 mm筛孔通过率的增加而降低，细集料和矿粉均会填充混合料孔隙而且矿粉的填充效果为细集料的3倍。随着超薄磨耗层级配由粗变密，混合料马歇尔稳定度增加，肯塔堡飞散损失降低，疲劳寿命下降，采用矿粉作为填料的混合料性能显著优于细集料。相关性分析结果表明，超薄磨耗层混合料马歇尔稳定度，飞散损失以及疲劳性能与孔隙率存在较好的相关性，TSR结果与沥青膜厚度存在较好的相关性。超薄磨耗层的设计需要充分考虑孔隙率与沥青膜厚度指标。     

热油泵机械密封泄漏原因及对策

冷却系统结垢后,摩擦副端面温度过高,这是导致热油泵机械密封失败的根本原因.采取软化水夹套冷却和新增静环背冷等措施,可降低摩擦副端面温度,从而解决密封泄漏的问题.     

A substitute model of two-dimensional dry friction exposed to dither generated by rolling contact of wheel and rail

Dither generated by rolling contact of wheel and rail smoothes dry friction damping provided by the primary suspension dampers of freight wagons and it should be taken into account in numerical simulations. But numerically the problem is non-smooth and this leads to long execution time during simulation, especially when the vehicle with friction dampers is modelled in the environment of an multi-body system simulation program, whose solver has to cope with many strong non-linearities. The other difficulty is the necessity of handling within the code a number of big volume files of recorded dither sampled with high frequency. To avoid these difficulties, a substitute model of two-dimensional dry friction exposed to dither is proposed that does not need application of dither during simulation, but it behaves as if dither were applied. Due to this property of the model, the excitation of the vehicle model by track irregularities may be supplied as low-frequency input, which allows fast execution and, the necessity of handling high-volume files of recorded dither is avoided. The substitute model is numerically effective. To identify parameters of the substitute model, a pre-processing employing a sample of the realistic dither is carried-out on a simple two-degrees-of-freedom system. The substitute model is anisotropic, describing anisotropic properties of the two-dimensional friction arising in the presence of one-dimensional dither. The model may be applied in other branches of engineering, for example, in mechatronics and robotics, where application of dither may improve the accuracy of positioning devices.