Genetics of traffic assignment models for strategic transport planning

This paper presents a review and classification of traffic assignment models for strategic transport planning purposes by using concepts analogous to genetics in biology. Traffic assignment models share the same theoretical framework (DNA), but differ in capability (genes). We argue that all traffic assignment models can be described by three genes. The first gene determines the spatial capability (unrestricted, capacity restrained, capacity constrained, and capacity and storage constrained) described by four spatial assumptions (shape of the fundamental diagram, capacity constraints, storage constraints, and turn flow restrictions). The second gene determines the temporal capability (static, semi-dynamic, and dynamic) described by three temporal assumptions (wave speeds, vehicle propagation speeds, and residual traffic transfer). The third gene determines the behavioural capability (all-or-nothing, one shot, and equilibrium) described by two behavioural assumptions (decision-making and travel time consideration). This classification provides a deeper understanding of the often implicit assumptions made in traffic assignment models described in the literature. It further allows for comparing different models in terms of functionality, and paves the way for developing novel traffic assignment models.     

Direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem

This paper proposes simple and direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem. It is only necessary to account for random variables independent of link flows by performing a simple transformation of the perceived link travel time with a normal distribution. At every iteration of a Monte-Carlo simulation procedure, the values of the random variables are sampled based on their probability distributions, and then a regular deterministic user equilibrium assignment is carried out to produce link flows. The link flows produced at each iteration of the Monte-Carlo simulation are averaged to yield the final flow pattern. Two test networks demonstrate that the proposed algorithms and the traditional algorithm (the Method of Successive Averages) produce similar results and that the proposed algorithms can be extended to the computation of the case in which the random error term depends on measured travel time.     

基于CCP协议的大功率高压共轨柴油机安全控制系统设计

以某10000kW大功率高压共轨电控柴油机为研究对象,实现柴油机状态参数的在线控制、标定和实时循环采集,并阐述CCP通信应用层协议的应用技巧和开发过程。该系统功能完备且稳定性好,为整机综合电控系统的开发提供通信基础平台,能明显缩短较复杂的大系统研发周期,可广泛应用于工程项目中。     

深埋双线铁路隧道衬砌高水压分界值研究

为研究深埋双线铁路隧道衬砌高水压分界值以及高水压作用下的衬砌受力状态,基于双线铁路隧道设计标准,利用有限元软件计算和分析双线铁路隧道衬砌在不同水压作用下隧道衬砌安全系数的变化规律,确定双线铁路隧道衬砌的高水压分界值。研究结果表明:Ⅱ、Ⅲ级围岩条件下水压力在0~0.05 MPa(约等于隧道净高一半)和Ⅳ、Ⅴ级围岩条件下水压力在0~0.1 MPa(约等于隧道净高)范围内变化时,隧道断面安全系数基本不变。在Ⅱ、Ⅲ级围岩条件下,双线隧道的高水压第一分界值为0.08~0.20 MPa;高水压第二分界值可取为0.40MPa。在Ⅳ、Ⅴ级围岩条件下,双线隧道的高水压第一分界值为0.12~0.35 MPa;高水压第二分界值为0.50 MPa。双线铁路隧道采用标准设计图进行设计时,能够承受的最大静水头为50 m,超过50 m的静水头,则需要优化断面。     

典型地铁站台射频天线电磁暴露安全评估

为有效评估典型地铁站台射频天线对乘客电磁暴露的安全性,设计地铁站台无线通信系统吸顶天线和乘客人体模型,利用基于有限元的电磁仿真软件,构建吸顶天线辐射下的地铁站台乘客候车电磁环境模型,研究候车乘客的公众电磁暴露问题。结果表明:天线分别工作在900和2 440 MHz时,人体组织的平均比吸收率最大值分别为4.441×10-7和1.165×10^-6W·kg^-1,电场强度最大值分别为0.139和0.148V·m^-1,平均比吸收率在人体组织内的衰减均大于电场强度的衰减;2 440MHz时的射频电磁能量在颅内的穿透能力小于900MHz时;所有计算值均低于国际非电离辐射委员会制定的公众电磁暴露限值,说明地铁站台射频天线对乘客的电磁暴露不会构成健康威胁。     

Noise level in the vicinity of signalized roundabouts

The analysis, assessment and estimation of noise levels in the vicinity of intersections is a more complex problem than a similar analysis for roads and streets. This is due to the varied geometry of the intersections, differences in the loads of individual movements, participation of heavy vehicles and mass transport vehicles, as well as the various types of traffic management and traffic control. This article analyses the influence of intersection type and traffic characteristics on the noise levels in the vicinity of classic channelized intersections with signalization, roundabouts and signalized roundabouts. Based on the conducted measurements, it has been established that, with comparable traffic parameters and the same distance from the geometric centre of the intersection, the L_Aeq value for signalized roundabouts is 2.5–10.8 dB higher in comparison to classic channelized intersections with signalization and 3.3–6.7 dB higher in relations to the analysed roundabout. Additionally the differences between L_Aeq levels at individual entries at the same signalized roundabouts may reach the value of approximately 4.5 dB. Such situation is influenced by differences in the intersection geometry, diameter of the intersection’s central island, traffic flow type, traffic management at the entries and traffic volume, especially the amount and traffic movements of multiple axle heavy vehicles. These factors have been analysed in detail in relation to signalized roundabouts in this paper.     

机动车超速行驶防范对策分析

机动丰超速行驶是引起交通事故的主要原因,是严重的道路交通违法行为之一。机动丰超速是由于驾驶人没有及时纠正驾驶过程中的误判、误动的结果。引起超速的原因包括驾驶人、机动车、交通安全设施和其他因素四个方面,应从教育培训、法律、交通安全设施、交通科技四个方面采取措施预防超速。     

对铁岭市银州路和广裕街交叉口改建工程的评价

重点从平面交叉口工程设计、交通安全设施、壮观和谐等三个方面对铁岭市银州路和广裕街平面交叉口工程进行评价。     

区域经济分析与地方公路交通量预测分析

论述区域经济分析过程中的注意要点,介绍经济发展的预测方法,阐述交通量与区域经济之间的相关性及几种模型的应用。     

水上交通安全宏观分析

分析了水上交通安全和宏观因素的关系,指出了进行水上交通安全宏观定量分析的可行性和存在的问题,结合目前宏观水上交通安全分析和评价的研究现状,提出了可行的研究方向。