基于AHP和DEA方法的公路建设项目评价

建立了公路建设项目的综合评价指标体系,改进了传统的数据包络分析方法;将层次分析法和改进的数据包络分析方法相结合,建立了综合评价模型;实证了运用该模型解决公路建设项目评价问题的可行性.     

欧盟关于汽车电磁兼容(EMC)最新技术要求

就汽车电磁兼容(EMC)技术要求,介绍欧盟指令72/245/EEC的最新修订版2004/104/EC的主要内容,指出其主要变化和应注意的问题。     

带自由液面有限长圆柱绕流数值模拟

[目的]为了探究自由液面及自由端对典型钝体绕流问题的影响,对带自由液面的有限长圆柱绕流进行研究。[方法]基于延时分离涡模拟（DDES）技术和分段线性界面重构（PLIC）方法,利用自主开发的naoe-FOAM-SJTU求解器开展数值模拟。[结果]结果显示,自由液面和自由端的存在增大了局部位置的升、阻力,推迟了圆柱表面流动分离的发生;相较于深吃水位置,自由液面附近流向的速度“恢复”延缓,横向的速度呈向外运动的趋势;自由液面的变形产生了大量细碎的漩涡,自由端的卷拧状漩涡在一定程度上抑制了卡门涡街的发展。[结论]研究表明,目前采用的数值方法能够准确捕捉复杂流场,同时,自由液面和自由端的存在将显著改变流场沿吃水方向的分布。     

基于朴素贝叶斯算法的船舶异常行为监测

随着海事事故与海上违法行为的不断增多,智能的监控方法成为降低海事事故,打击海上违法行为的有效手段.同时,船舶自动识别系统(Automatic Identification System,AIS)的普及及船舶交通管理系统(Vessel Traffic Service,VTS)的扩建,又为智能监控提供了数据支持.鉴于此,利用船舶自动识别系统提供的数据,分析通航水域船舶信息的分布情况,根据其概率分布采用朴素贝叶斯算法,从船舶航速、航向及距航道边界距离3个方面,构建船舶异常行为检测模型.最后,以成山角通航水域为例,检验模型的有效性.实验结果表明,构建的模型能够有效地完成异常行为监测,减少海事监管人员的工作强度,同时根据实验结果分析了成山角水域船舶航行的特点,并对成山角定线制提出合理化建议.     

基于层次分析法的船体舭部分段划分方案评价及优化

基于层次分析法梳理船体舭部分段划分的影响因素,构建方案评价分析模型,计算各评价指标的权重,实现量化的方案评价,针对优选方案在总段搭载吊装过程中权重得分较低,应用TSV吊装软件,分析并提出相应解决措施。     

二赛线GTM沥青混合料设计

结合内蒙古自治区二连浩特-赛汉塔拉的工程实例,介绍了GTM混合料设计方法的特点,以及根据当地的气候、交通状况确定工程级配范围和室内采用GTM完成混合料的设计及技术性能的检验。     

Wind Generator Stabilization with Doubly-Fed Asynchronous Machine

This paper investigates the function of doubly-fed asynchronous machine(DASM)with emphasis placed on its ability to the stabilization of the power system including wind generators.P(active power)and Q(reactive power)compensation from DASM can be regulated independently through secondary-excitation controlling.Simulation results by power system computer aided design(PSCAD)show that DASM can restore the wind-generator system to a normal operating condition rapidly even following severe transmission-line failures.Comparison studies have also been performed between wind turbine pitch control and proposed method.     

Tool Wear Prediction in Micro-end-milling with Hard Material

The applications of micro-machining have increased drastically in the last ten years. However, tools with less than 1mm diameter using for micro-mills have very short and unpredictable life when they are used to cut hard metals. In this study, preliminary design of experiment (DOE) test program was conducted to investigate and identify the factors affecting tool wear at the micro-scale with hard material. Analysis of variance (ANOVA) and Taguchi method were efficient to determine appropriate cutting condition and the effect of parameters. A simple model was also developed to predict the width of slots on the workpiece along the cutting length. The obtained results can provide the basic guidelines for parameter setting of micro-end-milling with hard material.     

Design Consideration and Reconstruction Method for Double-source Double-multislice Spiral CT

To accelerate the scan speed and improve the image quality, a new type of CT configuration, "double-source double-multislice spiral CT" (DSDMS-CT), which is based on two sets of single-source multislice spiral CT was proposed with a special reconstruction algorithm. Simulation results using the fan-beam filtered backprojection algorithm with a special interpolation method were presented for both single-source multislice spiral CT and DSDMS-CT. The results of new CT model show that it scans faster than the traditional spiral CT and has a better slice sensitivity profile (SSP) with larger pitch value.     

Numerical Simulation Research on Laser Shock Forming of Thin Metal Sheet

Laser shock forming (LSF) of sheet metal is a new technique realized by applying an impulsive pressure generated by laser-induced shock wave on the surface of metal sheet.LSF of brass sheet metal was investigated using a Q-switched Nd:YAG laser with an energy per pulse of 15～50 joules.ABAQUS software was used to simulate laser shock forming process.The central displacement of the shocked region is measured and compared with the simulation.The higher pulse energy, the higher central displacement of the shocked region were obtained.The deformation of the simulation matches the experiment quite well.