江海直达小型LNG运输船设计研究

讨论江海直达小型LNG运输的设计要点。以1 000 m3LNG运输船为目标,结合武汉长江大桥下游的长江平流通航条件以及投资和营运经济性,探讨相适应的船型尺度,确定合适的航速以及液货舱型式,对于机型的选择进行分析比较,提出较为合适的船型配置方案建议。     

高频感应加工参数对船舶弯板成形的影响

采用ANSYS软件对低碳钢平板的高频感应线状加热弯板成形过程进行热弹塑性有限元分析,利用相关数值结果定性分析加热功率、热源移动速度成形热过程中板材温度场及最终面内收缩变形和角变形的影响,为船板成形自动化加工提供数据支持.     

油田树状集油可更换电伴热管道的开发及应用

为了简化集油工艺、降低工程投资,对于外围油田的低产、油气比高以及原油凝固点较低的油井,通常应用树状电加热集油工艺,其中电加热保温管道是该工艺的关键部件和设施。传统的电加热管道存在着接头数量多、过热烧损等问题,影响正常运行。文中设计一种可更换电伴热体的新型伴热保温管道结构,使电热体接头数量显著减少,实现了不开挖更换和修复伴热体,延长了管道整体寿命,增强了电加热系统的稳定性和可靠性,取得了良好效果。     

The design of a terminal for dangerous goods

This paper aims at examining the possibility of setting up a model terminal for the transportation of dangerous goods. It should be designed in such a manner that its use would be possible for any kind of transportation.

This consideration has been prompted by the interface between transportation planning and technology, as well as by the tendency for harmonizing international recommendations pertaining to the transportation and handling of dangerous goods, especially during the last decades where unified transport has gained ground due to the advantages provided for the safe consignment of dangerous cargoes.

Since the large increase in terminal productivity is due to the heavy investments that were effected in terminal installations and to the modernization of the administration‐management of terminals, a mathematical simulation has been adopted to assist the determination of the capacity of a terminal for dangerous goods.

It is evident that different criteria and various assumptions have been taken into account in order to facilitate a deeper analysis, without ignoring the contribution of dangerous goods to the socio‐economic development.

From the outset of the study, it was already clear that the said process will make it possible to present—as a model—a simple but well defined situation for the purpose of drawing useful conclusions.     

Alternative fuels for transportation

The alternatives to the oil based fuels for transportation are considered and analysed. These are the synthetic fuels, made from coal, the liquid petroleum gases of propane and butane, compressed natural gas and methanol. The problems associated with the use of electric vehicles are discussed; the main problem being that of range.

The possible use of hydrogen as a fuel is analysed in some detail. Since its supply can be tied directly to nuclear energy sources, rather than hydrocarbon feed stocks, it could be an alternative in the long term. The main problems of the storage of hydrogen on the vehicle and of its propensity to “back‐fire” into the engine intake are discussed. The first can be ameliorated and the second eliminated by dual fuelling; with petrol. It is advocated that the on‐board storage of hydrogen be by the use of hydrides for private cars. However, it is expected that it may be as liquid hydrogen for some forms of transport and will certainly be in this form for aircraft.     

基于惯性基准的激光路面平整度检测系统研究

依据1/4车模型,分析了基于惯性基准的路面平整度检测方法,给出了采用激光测距仪和加速度传感器的输出信号获得待测路面纵断面相对高程的计算公式,实现了多路数据的同步采集与联合处理,介绍了对传感器输出信号的数据处理方法.通过与精密水准仪测量方法进行对比试验,结果表明基于惯性基准的检测方法在路面平整度检测中是可行的.     

LPG单燃料发动机稀薄燃烧控制策略研究

针对LPG单燃料发动机,基于旋转坐标系的独立气缸模型,提出了一种采用λ型氧传感器的稀薄燃烧控制策略,大大降低了线性氧传感器所带来的高昂成本,并实现了燃气喷射的逐缸控制。试验结果表明,该控制策略在满足系统动力要求的前提下,大大降低了燃气的消耗及废气的排放,具有良好的应用前景。     

燃油式红外线辐射加热技术在预热机上的应用

介绍了国内外沥青路面就地热再生加热技术的现状,提出了一种新型的燃油式红外线辐射加热技术。利用经验设计的方法,研发出了燃油式红外线辐射加热装置,采用系统分析法,对该装置的结构、功能及其工作流程进行了详细论述,并结合施工应用,验证了该加热技术的可行性,对关键控制技术进行研究,提出了利用PLC控制技术的改进方法。     

巧用4个继电器检测四线式步进电机

以独到的方式阐述汽车四线式步进电机的工作原理，以特别的方法轻而易举地实现步进电机的独立检测。     

甲醇汽油加入防水添加剂的试验研究

分析了M15甲醇汽油在添加防水添加剂和未添加防水添加剂的条件下的储存性能;比较了A,B两种添加剂随温度变化的稳定性;研究了M15甲醇汽油在加入防水添加剂后对非金属材料的溶胀作用。试验结果表明,通过加入防水添加剂,明显改善了M15甲醇汽油的存储性能,并且发现A添加剂具有随温度变化更好的稳定性;通过试验,还筛选出了发动机供油系统中对M15甲醇汽油与添加剂具有抗溶胀作用的零件材料。