增压中冷柴油机湿式气缸套周向应变的动态测试与分析

针对内燃机气缸套的动态变形问题,提出一套对湿式缸套在工作时的变形进行测试的方法。通过对增压中冷柴油机湿式气缸套周向应变的动态测试与分析,绘出缸套在工作时产生的周向变形曲线,分析缸套变形的特点以及主要影响因素。研究结果表明:增压后转速升高对缸套应变影响不明显,缸套的最大变形出现在各作用力对缸套壁面作功最大的2 200 r/m in工况。     

用杠杆法分析自动变速器的换挡过程

介绍了一种分析自动变速器换挡过程的新方法。将自动变速器中的行星传动机构简化为等效杠杆,利用等效杠杆的受力平衡图和转速关系图,可以直观判断单向离合器的接合或分离、换挡执行元件的工作状态以及动力传递路线。用等效杠杆法对日本丰田A340E电子控制自动变速器换挡过程的分析表明,采用单向离合器作为换挡执行元件的自动变速器的换挡过程非常简便。     

既有线车辆用车轴轮座上裂纹扩展性评价

介绍在既有线车辆轮座部位加工深度不等的人工伤痕,实施疲劳试验,并进行裂纹扩展性评价的结果.     

Structural safety assessment procedure for membrane-type LNG CCS considering hydroelasticity effect

As environmental regulations have become more onerous, the demand for LNG and LNG carriers has increased. The LNG cargo containment system (LNG CCS) is one of the most important facilities in LNG carriers, and many membrane types of LNG CCS have been developed so far. Traditionally, sloshing model tests are performed and a series of statistical approaches are used to obtain design sloshing pressures. Then, these design loads are utilized to analyze the structural safety of LNG CCS. In the sloshing model test, the flat and almost rigid plate is used as the LNG CCS instead of a real model, and thus, the hydroelasticity effect cannot be considered. In the present research, the effect of hydroelasticity on sloshing pressure was investigated in a fluid-structure interaction simulation. A wet drop simulation was conducted, and its results subsequently were compared with wet drop experimental test results to ensure their validity. Then, two types of structure model, namely a flat-rigid plate model and a flat-flexible CCS model, were generated to investigate the effect of hydroelasticity. Also, a fluid hitting analysis model was devised to realize the sloshing phenomenon, and the two generated structure models were applied as the structure domain in the analysis. In the fluid hitting simulations, it was found that the hydroelasticity effect on sloshing pressure is significant. Thus, correction factors, which are quantitative values of the effect of hydroelasticity, were derived (and are proposed herein). Finally, a structural safety assessment procedure for consideration of the hydroelasticity effect was derived (and is suggested herein).     

重载货车摩擦缓冲器阻抗特性的数值模拟

为预测摩擦缓冲器的实际工作状态,从几何特征和作用原理的角度,建立详细的MT-2型缓冲器理论模型。首先,通过对缓冲器内部各摩擦元件的运动学和静力学分析,推导出缓冲器在准静态下的阻抗特性;其次,引入附加摩擦系数量化各摩擦元件之间动静态摩擦过渡时的黏滞补偿,并模拟出缓冲器在动态下的阻抗特性;最后,利用C80型货车冲击试验数据对该缓冲器的理论模型进行验证。验证结果表明:总体上,数值模拟和现场试验下的缓冲器示功曲线基本吻合,说明模型的正确性;局部上数值模拟中缓冲器从加载Ⅰ阶段过渡至加载Ⅱ阶段的突变现象在冲击试验中表现的并不明显,还有待进一步完善。     

磁力摩擦式辅助驱动在TBM连续皮带机中的应用

长大隧道TBM(tunnel boring machine)施工大多采用连续皮带机出渣,当运输距离较大时通常需要在中间增设辅助驱动,以降低胶带最大张力,从而降低胶带强度。为了提高辅助驱动的工程适应性,研发了磁力摩擦式辅助驱动系统,具有驱动力大、无二次转载、胶带无二次冲击损伤、结构简单、故障点少、结构紧凑占用空间小、安装方便和配置灵活等特点。该成果可用于采用钢丝绳芯胶带的TBM连续皮带机、支洞皮带机以及其他需要辅助驱动的胶带输送机,并在山西省中部引黄工程TBM1标段成功应用,具有广阔的推广应用价值。     

基于地基回弹因素的盾构隧道管片上浮预测

针对软弱地层盾构隧道管片脱出盾尾后出现的上浮问题,分析盾构施工过程中管片上浮的诱因,得出软弱地层中管片的上浮主要是地层应力重分布产生的地基回弹力引起的。在此基础上建立隧道开挖动态模型,分析隧道上浮量变化规律以及地层特性对管片上浮量的影响规律,得出地层弹性模量和管片上浮量呈一定的指数关系,且弹性模量对管片上浮量的影响远大于地层黏聚力和内摩擦角。通过力平衡理论计算盾构开挖引起的地层回弹力、管片上浮量以及隧道上浮影响的地层高度范围,并通过对珠江狮子洋工程管片上浮量的计算与实测对比,证明该公式的合理性,为盾构隧道工程中考虑地基抗力引起的管片上浮量预测提供一种新的方法。     

Design of tyre force excitation for tyre–road friction estimation

Knowledge of the current tyre–road friction coefficient is essential for future autonomous vehicles. The environmental conditions, and the tyre–road friction in particular, determine both the braking distance and the maximum cornering velocity and thus set the boundaries for the vehicle. Tyre–road friction is difficult to estimate during normal driving due to low levels of tyre force excitation. This problem can be solved by using active tyre force excitation. A torque is added to one or several wheels in the purpose of estimating the tyre–road friction coefficient. Active tyre force excitation provides the opportunity to design the tyre force excitation freely. This study investigates how the tyre force should be applied to minimise the error of the tyre–road friction estimate. The performance of different excitation strategies was found to be dependent on both tyre model choice and noise level. Furthermore, the advantage with using tyre models with more parameters decreased when noise was added to the force and slip ratio.     

预应力锚索抗滑桩结构在处治滑坡中的应用

文章结合鹰阳关-莲塘二级公路K54+800处滑坡采用预应力锚索结构施工实践,介绍了预应力锚索抗滑桩结构在滑坡处治中的注意事项及使用效果.     

惯性摩擦制动对铜基粒子材料摩擦磨损性能的影响

采用粉末冶金工艺制备了多组元的铜基摩擦材料,利用GF150D型摩擦试验机,分别在不同的摩擦方式和不同的摩擦条件下,探讨了材料的摩擦磨损性能.结果表明:惯性摩擦条件下,随着摩擦压力提高,磨损量增加,摩擦系数降低.且在其他摩擦条件相同时惯性摩擦条件下的摩擦系数低于定速.惯性试验湿摩擦的摩擦系数比干摩擦的摩擦系数有显著提高,摩擦顺序为高速到低速时的摩擦系数的稳定性都高于摩擦顺序为低速到高速.