虚拟现实技术在船用离心泵拆装建模中的应用

采用虚拟现实技术实现了对船用离心泵的虚拟拆装.利用3DS MAX和Creator软件建立三维模型,分析了3DSMAX和MultiGen Creator各自的优点和不足;并以模型制作过程为例,得出在构建船舶设备的零部件时,采用Creator软件更有优势,更适合于后期的Vega软件的调用和渲染.     

我国动车组维修管理方式探讨

分析我国首条客运提速线——广深线所用瑞典X2000和国产“蓝箭”2种动车组的运用维制青况,从发挥动车组运输效率、方便维护的角度,对我国电动车组的研制与检修管理提出了建议。     

汽车暖风电动机的无线电骚扰抑制技术研究

在分析汽车暖风电动机无线电骚扰产生机理的基础上,研究无线电骚扰的抑制技术,并设计出X2Y EMI滤波器 电感滤波器的抑制方案,从而降低了汽车暖风电动机的无线电骚扰。     

以现代学徒制为导向的中职院校汽车维修专业1+X证书制度的应用价值探索

随着我国中职教育的不断发展"现代学徒制"模式被各大高校广泛推广应用,其更加强调技能的传承,由学校主导学生在校内阶段理论知识及实践技能的培养,实习时有企业师傅对所传授内容予以深化,并在实践中不断完善自身的专业职业技能技术.充分体现出工学结合、产教融合、校企合作的育人机制,实践意义强.     

基于DS18B20的多路温度采集系统

提出了基于采用DS18B20和AT89C51单片机组成的单总线多路温度检测系统,详细给出了硬件和软件系统的设计过程.该系统设计可靠性高、性价比高,在智能化自动检测和控制系统中具有广阔的前景.     

基于colormap的态势图分层机制研究

介绍X Window的显示原理和指控系统态势图的特点,并对X Window系统中的颜色分配原理和过程进行了详细的分析.最后,根据指控系统态势图特点提出了一种基于colormap的态势图分层机制来提高指控系统态势图的显示性能.     

现代城市需要新型轨道公共交通

城市化加剧导致城市交通已经成为城市发展的瓶颈，新型轨道公共交通是被公认的“绿色”大众交通，提出轨道交通装备的国产化是我国发展城市轨道交通的关键所在，并阐述了我国应多层次发展城市轨道交通的设想。     

实时时钟管理芯片DS12887在黑匣子中的应用

实时时钟管理在黑匣子设计中是必需的和非常重要的任务,而采用功能强大的时钟管理接口芯片是实现这一任务的十分有效的手段.分析了黑匣子技术中时钟管理的要求,说明了实时时钟管理芯片DS12887的功能、工作原理、各信号线及内部寄存器的作用.设计了89C51与DS12887的接口电路,确定了DS12887的各端口地址,给出了对DS12887的编程实例,并分析了在使用DS12887时应注意的一些问题.实验表明,所提出的设计方法正确有效.     

Study on the framework of hybrid collision warning system using loop detectors and vehicle information

Safety warning systems generally operate based on information from sensors attached to individual vehicles. Various types of data used for collision risk calculation can be categorized into two types, microscopic or macroscopic, depending on how the sensors collect the information of traffic state. Most collision warning systems use only either of these types of data, but they all have limitations imposed by the data, such as requirement of high installation cost and high market penetration rate of devices. In order to overcome these limits, we propose a collision warning system that utilizes the integrated information of macroscopic data and microscopic data, from loop detectors and smartphones respectively. The proposed system is evaluated by simulating a real vehicle trip based on the NGSIM data. We compare the results against collision warning systems based on macroscopic data from infrastructure and microscopic data from Vehicle-to-Vehicle information. The analysis of three systems shows two findings that (a) ICWS (Infrastructure-based Collision Warning System) is inadequate for immediate collision warning system and (b) VCWS (V2V communication based Collision Warning System) and HCWS (Hybrid Collision Warning System) produce collision warning at very similar timing, even with different behavior of individual drivers. Advantages of HCWS are that it can be directly applied to existing system with small additional cost, because data of loop detector are already available to be used in Korea and smartphones are widely spread. Also, the computation power distributed to each individual smartphone greatly increases the efficiency of the system by distributing the computation resources and load.     

实现高压隔离的两种方法

从控制电路原理及其它方面介绍了两种实现高压隔离的方法，分析了高压隔离开关的作用。