基于气电转换的发动机缸体在线测量系统

工业计算机控制的发动机缸体测量系统是由气动测量芯轴和差压式测量回路等组成,系统采用气电转换技术,在线自动测量发动机缸孔和主轴承孔并分组打号,满足了生产现场高精度测量的要求。     

论大直径灌注桩的设计、施工

大直径灌注桩广泛用于房屋、桥梁的基础工程中,当无水、少水且持力层为岩石、卵石层等理想土层,埋置深度在20 m左右,采用大直径灌注桩为基础,能取得质量可靠、造价经济的优良桩基.介绍了有关设计、施工的基本知识,对桩基设计、施工具有一定参考价值.     

锁紧气缸控制回路设计

介绍了锁紧气缸的结构、锁紧方式和几种基本的控制回路,给出了气缸两腔压力平衡状态下输入气压的关系。     

The potential mitigation of CO2 emissions via modal substitution of high-speed rail for short-haul air travel from a life cycle perspective – An Australian case study

The objective of this study is to provide a strategic evaluation of the mitigation of CO₂ emissions via modal substitution of high-speed rail for short-haul air travel on the Sydney–Melbourne, Australia city-pair from a life cycle perspective. It has been demonstrated that when considering CO₂ emissions from vehicle operations, the modal shift from air to high-speed rail on this city-pair has the potential to provide a means of CO₂ mitigation. However, uncertainty exists with regard to the level of mitigation potential when considering the whole-of-life performance of the systems. Given the significant difference in the infrastructure requirements between the air mode and the high-speed rail mode, this study quantifies the life cycle CO₂ load attributable to each system and examines the effect on CO₂ mitigation potential. The study concluded that while the inclusion of the linehaul infrastructure did increase the CO₂ load associated with high-speed rail mode, it did not equate to or exceed the CO₂ load per trip as experienced by the air mode. The avoided annual life cycle CO₂ emission in the target year 2056 was 0.37 Mt representing an 18% reduction when compared to the air mode only on the city pair. In fact, the scenario comparison indicated that the substitution of high-speed rail for short-haul air travel on the city pair resulted in CO₂ emissions avoidance throughout the longitudinal period.     

A novel approach for the modelling of air quality dynamics in underground railway stations

Indoor air quality in subterranean train stations is a concern in many places around the globe. However, due to the specificity of each case, numerous parameters of the problem remain unknown, such as the braking discs particle emission rate, the ventilation rate of the station or the complete particle size distribution of the emitted particles. In this study the problem of modelling PM₁₀ concentration evolution in relation with train traffic is hence addressed with a particle-mass conservation model which parameters are fitted using a genetic algorithm. The parameters of the model allow to reproduce the dynamics and amplitude of four field data sets from the French and Swedish underground contexts and comply with realistic bounds in terms of emissions, deposition and ventilation rate.     

船用厨房和具有烹调设备的配餐室的通风计算及空气处理方法

本文介绍了ISO 9943-2009国际标准和GBT 20846-2007中国国家标准中对船用厨房和具有烹调设备的配餐室的通风计算及空气处理中提出的送风量的计算方法，提出另一种更易于大家理解和接受的简易计算方法和空气处理过程，供工程技术及设计研究人员参考。     

柴油机活塞销孔型线对比分析研究

针对某柴油机活塞销孔的磨损问题,分别借助有限元方法和EHD仿真方法研究了不同销座结构匹配多种销孔型线对接触应力的影响,及不同活塞销孔型线对润滑特征评价参数的影响。综合研究表明,活塞销孔型线与热变形匹配不合理所引起的润滑状态恶化是导致活塞销孔磨损的直接原因,因此通过合理调整销孔型线可使接触应力均匀,润滑状态良好,并有效降低活塞销座磨损风险。     

长距离软管通风技术在张家冲长隧道的应用

通过张家冲隧道的工程实例,详细介绍了长大隧道的风量、风压计算方法,通风设备的选用和通风降尘的关键技术及隧道通风过程中需要采取的技术措施,对同类隧道工程施工具有一定的借鉴作用。     

科考船多波束导流罩线型CFD分析方法与试验验证

针对于科考船多波束导流罩设计和船体线型设计缺少关联分析的主要问题,介绍了一种科考船导流罩线型与船体线型一体化CFD分析方法,综合考虑实船航行过程中船体型线和导流罩型线之间的相互影响。根据这种分析方法,分别对导流罩和船体组合线型的阻力性能和防气泡性能进行了CFD预报,并进行了船模试验。两者吻合良好,验证了此种CFD分析方法的工程实用性。