一种侧装整体自装卸车的设计

为提高装备的装卸作业效率,满足特种方舱的装卸、运输和存储,实现车对车、车对地的装卸作业,设计一种专用超宽型、侧装式整体自装卸车。根据侧装式整体自装卸车的技术特点和作业情况,按照功能要求、技术指标和使用要求,合理进行运载底盘选型,从副车架、起重装置、液压系统、电控系统和辅助设施方面进行设计,采用Abaqus软件对起重装置进行有限元分析和刚强度校核,对自装卸车的稳定性进行校核。通过运行调试和试验,并对起重装置、液压系统和电控系统动作安全、稳定、可靠性进行考核,各载荷工况和极限作业工况下,均可进行正常装卸作业,各项性能均满足指标要求。此侧装卸车的成功研制,使侧装卸技术得到了创新和改进,有助于扩展思路,提供设计借鉴,拓展侧装车整体自装卸技术的应用范围。     

Experimental and numerical investigation on the derailment of a railway wheelset with solid axle

This paper presents the results of an experimental and numerical investigation on the derailment of a railway wheelset with solid axle. Tests were carried out under quasi-steady-state conditions, on a full-scale roller rig, and allowed to point out the effect of different parameters like the wheelset's angle of attack and the ratio between the vertical loads acting on the flanging and non-flanging wheels. On the basis of the test results, some existing derailment criteria are analysed in this paper and two new criteria are proposed. A model of wheel–rail contact is proposed for the mathematical modelling of the flange climb process, and numerical vs. experimental comparisons are used to obtain model validation.     

某下穿通道快速化预制拼装工艺总体设计方案

随着国家城市化进程的不断加快,传统现浇工艺存在着施工质量相对较差、对周边环境影响较大、劳动力成本不断上升等一系列问题,与国家提出的高质量发展目标存在一定差距,为此国家从政策方面开始推行预制拼装工艺。以某斜交下穿通道工程采用预制拼装工艺为例,从结构分块、接缝形式及防水、吊点布置等关键环节进行了系统性的研究与探讨,提出了一整套的设计方案,为工程的建成提供了有力的技术支撑,同时也为类似工程提供了有意义的参考借鉴。     

人绒毛膜ABO(H)血型物质检测的研究

本文以人绒毛膜为检材,提出玻片粘附解离法检测ABO(H)血型物质。同时对绒毛膜的取材条件及保存方法进行了初步的探索。结果表明:本实验方法与目前国内报道的人绒毛膜ABO(H)血型物质试管检测的方法相比较,取材用量少(2～4 mg),操作简便,对孕早期进行亲子鉴定有实用意义。检材在冷藏保存情况下,检测时限可达三个月。     

Alternative Modeling Approaches Used for Examining Automobile Ownership: A Comprehensive Review

Abstract

Household vehicle ownership, and the associated dimensions including fleet size, vehicle type and usage, has been one of the most researched transport topics. This paper endeavors to provide a critical overview of the wide-ranging methodological approaches employed in vehicle ownership modeling depending on the ownership representation over the past two decades. The studies in the existing literature based on the vehicle ownership representation are classified as: exogenous static, exogenous dynamic, endogenous static and endogenous dynamic models. The methodological approaches applied range from simple linear regressions to complex econometrics formulations taking into account a rich set of covariates. In spite of the steady advancement and impressive evolution in terms of methodological approaches to examine the decision process, we identify complex issues that pose a formidable challenge to address the evolution of vehicle ownership in the coming years. Specifically, we discuss challenges with data availability and methodological framework selection. In light of these discussions, we provide a decision matrix for aiding researchers/practitioners in determining appropriate model frameworks for conducting vehicle ownership analysis.     

重庆轨道交通3号线检修通道研制

高架跨座式单轨交通的结构特点使得其运营中的检查维修工作难以展开、紧急事故应对能力差，研究设计专门的检修通道迫在眉睫。文章简要介绍重庆轨道交通3号线检修通道的功能、构成、总体设计要求、重点制作工艺，为今后跨座式单轨检修通道的制作提供依据和参考。     

摩擦焊在十吨挂车车轴焊接中的应用

摩擦焊技术以其可靠的工艺、稳定的质量、安全的使用性在汽车零部件制造中得到认可。摩擦焊过程参数控制和工艺验证，是保证挂车车轴焊接可靠性的重要条件，对挂车车轴生产质量的稳定起着关键性作用。     

高速铁路双块式无砟轨道路基地段结构设计与施工技术研究

为了提高双块式无砟轨道的设计和施工质量,首先对路基地段双块式无砟轨道道床板和支承层的功能定位进行分析,提出连续道床板和分块道床板两种结构设计方案的主要特点和设计要点,并对两种设计方案进行结构受力和配筋计算。然后从抗压强度、结构耐久性、疲劳强度、裂缝控制等要求研究道床板混凝土的强度等级,提出道床板混凝土强度采用C40是足够的,且强度不宜太高。最后结合目前双块式无砟轨道施工和运营经验,提出道床板和支承层在施工过程中应注意的一些问题。     

Influence of polygonal wear of railway wheels on the wheel set axle stress

The coupled vehicle/track dynamic model with the flexible wheel set was developed to investigate the effects of polygonal wear on the dynamic stresses of the wheel set axle. In the model, the railway vehicle was modelled by the rigid multibody dynamics. The wheel set was established by the finite element method to analyse the high-frequency oscillation and dynamic stress of wheel set axle induced by the polygonal wear based on the modal stress recovery method. The slab track model was taken into account in which the rail was described by the Timoshenko beam and the three-dimensional solid finite element was employed to establish the concrete slab. Furthermore, the modal superposition method was adopted to calculate the dynamic response of the track. The wheel/rail normal forces and the tangent forces were, respectively, determined by the Hertz nonlinear contact theory and the Shen–Hedrick–Elkins model. Using the coupled vehicle/track dynamic model, the dynamic stresses of wheel set axle with consideration of the ideal polygonal wear and measured polygonal wear were investigated. The results show that the amplitude of wheel/rail normal forces and the dynamic stress of wheel set axle increase as the vehicle speeds rise. Moreover, the impact loads induced by the polygonal wear could excite the resonance of wheel set axle. In the resonance region, the amplitude of the dynamic stress for the wheel set axle would increase considerably comparing with the normal conditions.     

适应大型船舶靠离码头的全回转拖轮的研制

为使大型集装箱船舶安全快速地靠离码头,本课题开发研制了3676kW(5000马力)新型全回转拖轮.通过对总体布置和线型的优化设计,合理地选配设备和新工艺的应用,使新型拖轮能安全地进入大型集装箱船舶的艏部和艉部区域,有效地实施顶推作业,提高了作业效率和安全系数,具有显著的经济效益和社会效益.实船已投入使用。