岷江下游航道特定尺度船闸的通过能力仿真

针对船闸在特定设施条件和服务水平条件下的最大通过能力,自行开发了一套仅对岷江下游航道船闸适用的船闸通过能力仿真系统。该仿真系统以船闸固定作业周期为前提,对船闸作业和服务水平进行了动态分析,直观反映了船闸通过能力与船闸待闸时间、待闸吨位及船型组合之间的关系,弥补了传统计算方法的不足,并较全面地反映和预估了不同条件下船闸的...     

长兴岛高速公路葫芦山湾大桥主桥承载能力试验研究

通过对葫芦山湾大桥主桥进行静载试验,分析了该飞鸟式系杆拱桥在设计荷载作用下的结构受力特性,从而确定桥梁的实际承载能力。     

圆形钢筋混凝土桥墩抗震性能(Ⅱ):试验结果评估

根据桥墩拟静力正交试验现象及数据结果,研究了圆形钢筋混凝土桥墩的变形特征及弯曲强度特性;并对低周反复荷载作用下桥墩的位移延性、等效刚度和刚度退化性能以及极限位移状态下累积耗能能力进行了评估,综合考察了剪跨比、轴压比、纵筋率、配箍率等因素对桥墩延性性能的影响.可为桥梁的延性抗震设计提供参考.     

U.S. import/export container flow modeling and disruption analysis

International containerized freight movement is a vital part of the supply chain for many companies, and a critical element of moving consumer goods to points of retail sale within the U.S. Containerized imports also present a clear security concern (e.g., terrorists attempting to ship “dirty bombs,” chemical, biological or even nuclear weapons, into the U.S. in a shipping container). The goal of the research presented here is to create a modeling tool for analyzing flows of U.S. imports and exports of containerized freight, and the potential changes in those flows under a variety of conditions (e.g., port disruptions, extensive security-related delays, etc.). Our focus is on movements through maritime container ports, and not overland movements between the U.S. and Canada or Mexico.The network model, referred to as the System for Import/Export Routing and Recovery Analysis (SIERRA), represents container movements between the U.S. and 46 other countries that account for the vast majority of U.S. imports and exports. The SIERRA model is a network equilibrium model that predicts flows between foreign countries and North American ports, the total volumes handled (import and export) by each port, the modal volumes (truck and rail) moving domestically into and out of each port, and volumes between each port and a set of transportation analysis zones within the U.S.     

Controlled installation of spudcan foundations on loose sand overlying weak clay

Offshore jack-up rigs are often used for site exploration and oil well drilling. The footings of jack-up rigs are known as spudcan foundations. The risk of rapid uncontrolled penetration of spudcan in seabed (“punch-through”) exposes jack-ups to significant risk during installation in strong over weak layered seabeds. An example for this is a thin loose sand layer overlying a weaker stratum of clay. To prevent spudcans from “punch-through”, an in-situ measurement concept is suggested in this paper to control the installation process of spudcan foundations. First, three-dimensional finite element studies using a Coupled Eulerian–Lagrangian method are carried out to simulate the penetration process. The numerical results have been validated with existing analytical solutions and centrifuge model test data. Furthermore, parametric studies are carried out to quantify the influences of the sand thickness and shear strength of the clay on the bearing capacity of spudcans. Based on the numerical studies an idea for the development of an in-situ measurement concept is suggested to control the spudcan penetration process in-situ.     

舰船结构总纵强度可靠性分析的一种新方法

提出了舰船总纵强度可靠性分析的一种新方法,探讨在短期随机海况下船体总纵强度的安全裕度的近似概率计算.通过一个例子,详细给出了短期海况下船体安全裕度的计算过程,显现出该方法在短期海况中进行船体总纵强度可靠性分析与评价的良好应用前景.     

船体艉部变形计算及其在轴系坞内校中技术中的应用

阐述了与轴系合理校中技术有关的弯矩影响系数的概念。提出利用弯矩影响系数与轴系截面上的弯矩值计算轴承变位的方法。在实船上用应变片测量了轴截面弯矩,根据实船测量的弯矩数值与弯矩影响系数确定了不同状态间船体艉部在轴承处的相对变形。最后进行了实船验证,结果表明船体艉部变形数据的正确性与坞内校中工艺的可行性。这为轴系坞内校中工艺的实施奠定了理论基础。     

53000吨特涂舱化学品/成品油船的分舱优化

化学品/成品油船的分舱原则不仅要满足国际公约、规则及船级社规范,还要综合考虑完整稳性、破舱稳性以及总纵强度的影响.文章介绍了中船重工船舶设计研究中心有限公司开发的53000DWT IMO II型特涂舱化学品/成品油船的分舱优化设计过程,对设计人员在同吨位液货船分舱设计方面有一定的参考作用.     

挖泥船“HAM318”的加长改装

“HAM318”是一艘挖泥船,原来的泥舱舱容太小,需要增加泥舱舱容。大连中远船务承接此项改装工程,从船舯部将其割开,加入51．1m长的新制分段,分别于原船艏部和艉部连接。改装后的船舶将增加13800m^3的泥舱舱容。文章将对该轮加长改装过程中的技术问题进行论述。     

水工结构物混凝土保护层的作用及质量控制

针对水工结构物目前混凝土保护层厚度普遍控制不严的现状,简要分析了混凝土保护层厚度对钢筋混凝土结构的承载能力与耐久性的影响,同时结合大量的检测实践,指出当前水工结构施工在混凝土保护层厚度控制方面存在的不足,并对这方面的质量控制提出具体建议,以期进一步引起对混凝土保护层施工质量的重视。