“中—尼—印铁路通道”线路设计及建设可行性分析

随着我国"一带一路"倡议的推进,跨国运输通道的建设成为倡议实施的关键环节之一,而我国建设复杂地质条件下跨国基础设施的经验尚不丰富。"中—尼—印铁路通道"是一条途经尼泊尔,连接中国和印度2个大国的运输通道,基于实地考察,分析该通道建设的必要性及建成后的效益,对线路进行初步规划,并总结该通道建设的难点:铁路轨道坡度大;沿线区域地质构造复杂;周边基础设施落后,施工条件恶劣;大量深长隧道以及大跨径高桥梁;环境以及气候条件复杂。同时对沿线隧道以及桥梁的建设可行性进行分析,并给出施工建议:沿线隧道采用以TBM法为主、钻爆法为辅的施工方法;桥梁建设则因地制宜,根据不同区间的地质特点,采用相应的建设方法。     

复杂地形条件下桥隧相连隧道洞口结构设计研究

蒙华铁路坪桥1号隧道进口洞顶基岩外凸、洞顶以下岩面高且直立、洞顶上部地形偏压高陡,地形条件极其复杂。营盘山大桥与坪桥1号隧道进口紧密相连,存在桥台与隧道洞门结构相互干扰以及边坡防护、隧道出洞和洞口场地布置等一系列难题,设计难度极大。为解决这些难题,通过对现场实际地形、地质情况进行研究,对比分析"整体式"与"分离式"桥隧相连结构的优缺点,提出桥台与隧道相结合的"整体式"桥隧相连结构方案;同时,针对地形偏压高陡,提出非对称结构设计方案,实现了隧道"零"仰坡出洞,解决了洞口边坡防护的难题;最后,提出架立临时贝雷梁的方案,解决了隧道出洞及洞口场地布置的难题。     

极高地应力软岩隧道超前导洞应力释放及多层支护变形控制技术

为了解决极高地应力软岩隧道大变形控制难题,以兰渝铁路木寨岭隧道岭脊核心段施工为例,通过现场试验和数据分析,得到如下主要结论:1)提出了"先放后抗,抗放结合,锚固加强"的变形控制理念;2)得出了该隧道岭脊核心段"超前导洞应力释放+圆形4层支护结构+径向注浆+长锚杆+长锚索"综合变形控制方案;3)超前导洞应力释放效果明显,正洞累计变形减小幅度约为34%;4)得到了圆形多层支护结构变形规律;5)累计变形均控制在设计预留变形量内,保证了该隧道岭脊核心段大变形控制效果。     

Direct yaw moment control and power consumption of in-wheel motor vehicle in steady-state turning

Driving force distribution control is one of the characteristic performance aspects of in-wheel motor vehicles and various methods have been developed to control direct yaw moment while turning. However, while these controls significantly enhance vehicle dynamic performance, the additional power required to control vehicle motion still remains to be clarified. This paper constructed new formulae of the mechanism by which direct yaw moment alters the cornering resistance and mechanical power of all wheels based on a simple bicycle model, including the electric loss of the motors and the inverters. These formulation results were validated by an actual test vehicle equipped with in-wheel motors in steady-state turning. The validated theory was also applied to a comparison of several different driving force distribution mechanisms from the standpoint of innate mechanical power.     

The Kalker book of tables for non-Hertzian contact of wheel and rail

A new regularisation of non-elliptical contact patches has been introduced, which enables building the look-up table called by us the Kalker book of tables for non-Hertzian contact (KBTNH), which is a fast creep force generator that can be used by multibody dynamics system simulation programs. The non-elliptical contact patch is regularised by a simple double-elliptical contact region (SDEC). The SDEC region is especially suitable for regularisation of contact patches obtained with approximate non-Hertzian methods for solving the normal contact problem of wheel and rail. The new regularisation is suitable for wheels and rails with any profiles, including worn profiles.

The paper describes the new procedure of regularisation of the non-elliptical contact patch, the structure of the Kalker book of tables, and parameterisation of the independent variables of the tables and creep forces.

A moderate volume Kalker book of tables for SDEC region suitable for simulation of modern running gears has been computed in co-simulation of Matlab and program CONTACT.

To access the creep forces of the Kalker book of tables, the linear interpolation has been applied.

The creep forces obtained from KBTNH have been compared to those obtained by program CONTACT and FASTSIM algorithm. FASTSIM has been applied on both the contact ellipse and the SDEC contact patch. The comparison shows that KBTNH is in good agreement with CONTACT for a wide range of creepage condition and shapes of the contact patch, whereas the use of FASTSIM on the elliptical patch and SDEC may lead to significant deviations from the reference CONTACT solutions.

The computational cost of calling creep forces from KBTNH has been estimated by comparing CPU time of FASTSIM and KBTNH. The KBTNH is 7.8–51 times faster than FASTSIM working on 36–256 discretisation elements, respectively.

In the example of application, the KBTNH has been applied for curving simulations and results compared with those obtained with the creep force generator employing the elliptical regularisation. The results significantly differ, especially in predicted creepages, because the elliptical regularisation neglects generation of the longitudinal creep force by spin creepage.     

高等教育大众化视阈下的高等职业教育质量观刍议

随着我国高等教育大众化进程的不断推进,高等职业教育的教育质量成了全社会最为关注的问题．文章运用高等教育理论并结合当前高等职业教育发展的现状,对新时期高等职业教育质量现进行了导引性研究,旨在为目前高等职业教育的发展挖掘和提供多雏视角．     

“学-导多元互动”教学模式对高校艺术设计教育的启示——以视觉传达设计教学为例

“学-导多元互动”教学模式是依据相关教育理论、教育观念以及结合现代远程开放教育发展的要求和实践而形成的重在体现以人为本,真正做到“以学习者为中心”,为学习者提供多元的服务,满足学习者的学习需要和求知愿望,构建终身学习体系和学习型社会的教育思想的教学模式。文章以视觉传达设计教学为例,从“学-导多元互动”教学模式的内涵、教学效果及对高校艺术设计教育的启示三个方面加以阐述,希望对于高校艺术设计教育教学模式的改革起到一些借鉴作用。     

笑在唇边苦涩生——王蒙小说的幽默文体特色浅析

幽默作为文体形式是王蒙的创造,他灵活地运用这一具体而独特的形式表现灵魂生活,解释和反映现实世界。把众多我们习以为常的不合理的现象重新审视,以幽默的文体形式进行批驳揭露。王蒙的幽默文体给人的不是开怀大笑,而是会心的笑,苦涩的笑,由此引发读者的共鸣。作者强烈的爱国心、使命感使他的感情十分投入,叙述无遮拦、不隐蔽的表达,无限缩小了他与作者和读者之间的距离,实现了作家与读者之间穿越时空的心灵交流。     

桥梁加宽中新增梁对旧桥的影响

依托黄土地区高速公路改扩建桥梁加宽工程,选取一座3孔13 m简支空心板桥,分析新增空心板梁对旧桥原有板梁的影响。基于不同加宽方案对新旧桥空心板梁横向分布系数进行了计算,计算结果表明增加新梁截面刚度可有效降低旧梁横向分布系数。建议采用移旧桥边梁为新桥边梁并且提高新增空心板梁刚度的加宽方案。     

泉州晋江斜拉桥主梁边跨合拢段施工

介绍泉州晋江斜拉桥的概况及边跨合拢施工技术、施工流程等。