岩土锚固力的确定及应用

选定粤赣高速公路有代表性的6种岩层,对其全、强、弱风化层组成的路堑高边坡锚索加固工程进行了69次破坏性拉拔试验。试验中对每种不同风化程度的岩(土)层采用锚固长度为1m、2m、3m的现场拉拔试验,计算出锚索加固边坡的锚固力值,为验证高边坡工程设计提供了准确的力学参数,也为全线高边坡工程的施工工艺提供指导性意见。同时,节省了大量的试验费用和时间,获得了显著的经济效益。     

Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method

To ensure the safety of navigating ship, working loads and structural load-carrying capacity are two important aspects. In the present paper, a total simulation system combing load calculation and structural collapse analysis is applied to simulate progressive collapse behaviour of a single-hull Kamsarmax type bulk carrier. A three dimensional singularity distribution method is adopted to calculate pressure distribution with time history. A mixed structural model, collapse part simulated by ISUM elements and remaining part by elastic FEM elements with relative coarse mesh, is proposed for collapse analysis. Progressive collapse behaviour obtained by ISUM is good agreement with that by nonlinear software package, MARC. However, the calculation time of ISUM analysis is about 1/70 of MARC analysis. The applicability to structure system, high accuracy and sufficient efficiency of ISUM had been demonstrated.     

A regression and beam theory based approach for fatigue assessment of containership structures including bending and torsion contributions

Container shipping has been expanding dramatically during the last decade. Due to their special structural characteristics, such as the wide breadth and large hatch openings, horizontal bending and torsion play an important role to the fatigue safety of containerships. In this study the fatigue contributions from vertical bending, horizontal bending and torsion are investigated using full-scale measurements of strain records on two containerships. Further, these contributions are compared to results from direct calculations where a nonlinear 3D panel method is used to compute wave loads in time domain. It is concluded that both bending and torsion have significant impacts on the fatigue assessment of containerships. The stresses caused by these loads could be correctly computed by full-ship finite element analysis. However, this requires large computational effort, since for fatigue assessment purposes the FE analysis needs to be carried out for all encountered sea states and operational conditions with sufficient time steps for each condition. In this paper, a new procedure is proposed to run the structure finite element analysis under only one sea condition for only a few time steps. Then, these results are used to obtain a relationship between wave loads and structural stresses through a linear regression analysis. This relation can be further used to compute stresses for arbitrary sea states and operational conditions using the computed wave loads (bending and torsion moments) as input. Based on this proposed method for structure stress analysis, an efficient procedure is formulated and found to be in very good agreement with the full-ship finite element analysis. In addition it is several orders of magnitude more time efficient for fatigue assessment of containership structures.     

非收放式减摇鳍鳍轴校核算法研究

非收放式减摇鳍作为减摇鳍产品中非常重要的一个组成部分,而鳍轴也是其减摇力矩传力链中非常重要的一环,对于鳍轴综合应力的校核也就成了非收放式减摇鳍设计中的关键。通过比较考虑剪力的新算法以及仅做弯扭综合应力校核的2种算法,及它们在不同强度理论下的状态,综合讨论得出能使鳍轴应力值更加精确的算法。     

“穷举法”在油船货油舱分舱优化设计中的应用

为实现油船货油舱分舱优化,以一艘大型油船为例,根据MARPOL公约和共同结构规范(HCSR)的要求,在主尺度、船型和货油舱总舱容确定的情况下,以最小静水弯矩为优化目标,基于"穷举法"编制优化货油舱横舱壁位置的应用程序。实际应用结果表明,该程序可运用到油船的分舱优化中,能达到快速、合理地分舱,提高设计效率的目的。     

STAAD.Pro在海洋工程模块吊装设计中的应用

对STAAD.Pro软件在海洋工程模块建造的加工设计阶段的应用进行了探讨。通过STAAD.Pro软件的可视化操作平台,对实际海洋工程模块进行建模、加载、计算和分析,通过计算得出模块的质量和质心位置,并根据规范对模块进行整体强度校核,从而对海洋工程模块的吊点布置及其吊装过程起到实际的指导作用。     

舰船加筋板局部强度评估中的总纵应力折减系数研究

舰船加强筋尺寸的合理确定一直是结构设计中的热点问题。本文综合考虑总纵弯曲应力和局部载荷的相互作用,研究加强筋的许用应力折减系数(C_s)的影响因素与合理取值方法。通过分析加强筋的力学模型、对比不同规范中的C_s取值,以及用非线性有限元软件Abaqus计算一系列加筋板模型,拟合C_s曲线并与规范对比,并验证剖面对称性和局部载荷作用方向对C_s取值的影响方式,丰富了舰船局部强度校核方法的技术背景,为板架设计、舰船三维局部校核程序开发提供借鉴。     

垃圾土力学特性及其路基填筑应用研究

将垃圾土应用于公路路基填筑是实现垃圾土大规模资源化利用的有效途径。本文首先对实际垃圾土进行筛分处理,制得适用于公路路基的垃圾筛余土(简称垃圾土);进而,通过室内试验研究了直接压实垃圾土和固化垃圾土的抗剪强度、CBR值等力学特性;以此为基础,修筑直接压实垃圾土路基试验段,并采用适宜的新型施工工艺修筑固化垃圾土路基试验段,监测路基的工后沉降随时间的变化规律,对比两种垃圾土路基的应用效果。结果表明:固化垃圾土与直接压实垃圾土相比,粘聚力提高1.6~1.9倍,内摩擦角提高30%以上,CBR值提高4.5~5.1倍;固化垃圾土路基的工后沉降比直接压实垃圾土路基降低64.7%,且能够更早地趋于稳定。以上结果证明:本文提出的固化垃圾土路基施工工艺和垃圾土资源化利用途径是可行的。     

Assessment of fatigue strength of steel butt-welded joints in as-welded condition – Alternative approaches for curve fitting and mean stress effect analysis

Experimental fatigue data for butt-welded joints in as-welded condition and under constant amplitude tensile loading (secondary bending included) were analyzed using the nominal stress system and the notch stress system. Two approaches were used; a standard fitting procedure and minimization of the sum of squared perpendicular distances from a line with a fixed and free slope. In all cases, the latter method gave better agreement between the experimental and predicted fatigue life and fatigue strength. The analyses showed both with all broken specimen data included and with reduced data that the FAT225 curve, as recommended by IIW, might be too optimistic for the notch stress approach in the case of butt-welded joints in as-welded condition. It was also found that use of the local stress ratio instead of the applied stress ratio might explain many issues concerning current observations and apparent inconsistencies in reported literature.     

大断面异形盾构隧道弯矩传递系数原型加载试验研究

由于异形盾构隧道特殊的结构断面型式,管片设计暂无相关规范可循,故基于原型三环管片力学加载试验对异形盾构管片环向接头弯矩传递系数进行研究,研究结果表明:1)随埋深增加,异形盾构管片结构整体刚度提升,但由于各接头刚度与相邻管片结构刚度比随埋深增加变化规律不一致,异形盾构管片接头弯矩传递能力呈部分减弱部分增强的现象;2)同埋深条件下,随着侧压力系数的增加,除右拱腰处接头外,其余接头弯矩传递能力随着接头刚度与相邻管片结构刚度比的增大而逐渐增强;3)随着埋深增加,各接头弯矩传递能力对侧压力系数的敏感程度逐渐减弱;4)极限破坏后,异形盾构管片内外弧面裂缝的分布规律证明了明显的弯矩传递现象。