SCO Open Server系统安装启动盘的制作方法

针对TMIS工程建设中SCO Open Server系统安装启动盘使用中存在的问题,结合日常工作实践,提出用多种不同软件来制作SCO Open Server系统安装启动盘的方法.     

MULTI-FLEXIBLE SYSTEM DYNAMIC MODELING THEORY AND APPLICATION

IntroductionCommonly,a mechanical system consists ofseveral parts. They are combined by series of geo-metrical bounds in order to accomplish expectedmotions.Therefore,if every part in the system isregarded as a rigid body,the system is called mul-ti- rigid system;but if some parts' deformationcannot be ignored,the system is called multi- flexi-ble system or flexible multi- body system[1,2 ] .Nowadays,with the world economy' s rapiddevelopment and marketglobalization,itis key forenterprises' ex…     

Flow Past an Accumulator Unit of an Underwater Energy Storage System:Three Touching Balloons in a Floral Configuration

An LES simulation of flow over an accumulator unit of an underwater compressed air energy storage facility was conducted. The accumulator unit consists of three touching underwater balloons arranged in a floral configuration. The structure of the flow was examined via three dimensional iso surfaces of the Q criterion. Vortical cores were observed on the leeward surface of the balloons. The swirling tube flows generated by these vortical cores were depicted through three dimensional path lines. The flow dynamics were visualized via time series snapshots of two dimensional vorticity contours perpendicular to the flow direction; revealing the turbulent swinging motions of the aforementioned shedding-swirling tube flows. The time history of the hydrodynamic loading was presented in terms of lift and drag coefficients. Drag coefficient of each individual balloon in the floral configuration was smaller than that of a single balloon. It was found that the total drag coefficient of the floral unit of three touching balloons, i.e. summation of the drag coefficients of the balloons, is not too much larger than that of a single balloon whereas it provides three times the storage capacity. In addition to its practical significance in designing appropriate foundation and supports, the instantaneous hydrodynamic loading was used to determine the frequency of the turbulent swirling-swinging motions of the shedding vortex tubes; the Strouhal number was found to be larger than that of a single sphere at the same Reynolds number.     

轿车车身结构修改灵敏度分析

建立某国产普通轿车白车身的有限元模型,预测分析其静态弯曲特性和扭转特性,在此基础上对白车身各部件刚度和强度的灵敏度进行分析,并将分析结果应用于板厚优化。优化结果表明:通过对灵敏部件的板厚修改,白车身的强度和刚度性能得到显著提高,为车身的优化设计提供参考。     

基于RMA方法的汽车车身CAN总线优化设计

针对汽车车身控制信息的高实时性和车身CAN系统扩充的高灵活性等特殊要求,介绍用于实时系统分析的速率单调分析(RMA)方法,在原总线利用率、信息最坏响应时间等实时性指标基础上引入总线扩展灵活性因子进行车身CAN总线方案的寻优设计,并以典型汽车车身控制系统为例,对单信号方案和信号组合方案进行实时性和扩展灵活性对比分析,在线试验结果验证了理论分析数据的正确性。     

玻璃钢浮标拖体结构强度及稳定性分析

在Donnell理论的分析基础上，结合有限元软件分析了某型玻璃钢浮标拖体的结构强度和稳定性。首先，采用Donnell理论分析了经简化处理的拖体主体的稳定性，以此建立选择壳体参数的理论依据。接着，采用ANSYS软件对浮标拖体结构进行了一系列方案计算。综合考虑重量、强度和稳定性三个因素，分别变化了材料铺层方式、壳体厚度以及肋骨尺寸等参数，最终得到了符合设计要求的结构形式。     

海上风机吊装运输船及其吊装方式的研究概况

介绍了国内外海上风电的发展情况和前景,风电场建设对风机吊装运输船的需求;阐述了海上风机吊装运输船的分类及风机安装方式的发展变化。     

武汉军山长江公路大桥B标主桥钢箱梁安装及斜拉索张挂施工

文章主要介绍了武汉军山长江公路大桥B标主桥钢箱梁安装及斜拉索张挂的施工过程及方法，同时对主桥的施工监控进行了叙述。     

主动悬架车辆垂向及俯仰控制的仿真研究

以车辆悬架系统为研究对象,采用多刚体系统动理学方法建立主动悬架模型,与模糊PID复合控制策略相结合,构成了一个基于精确模型和简洁控制策略的仿真系统。仿真结果表明,该系统通过车辆垂向及俯仰控制,有效改善了车辆的行驶平顺性。     

梅洛-庞蒂的身体现象学

作为法国著名的现象学家,梅洛—庞帝的现象学思想可谓独树一帜。他深受胡塞尔现象学思想,特别是其后期现象学思想的影响,并且提出了“身体”这一概念,从而创造出自己独特的身体现象学。