Initial results from long-term measurements of atmospheric humidity and related parameters in the marine boundary layer at two locations in the Gulf of Mexico

Measurements of boundary layer moisture have been acquired from Rotronic MP-100 sensors deployed on two NDBC buoys in the northern Gulf of Mexico from June through November 1993. For one sensor, which was retrieved approximately 8 months after deployment, the post- and precalibrations agreed closely and fell well within WMO specifications for accuracy. The second sensor operated continuously from June 1993 to February 1997 (3.5 years). Buoy observations of relative humidity and supporting data were used to calculate specific humidity and the surface fluxes of latent and sensible heat. Specific humidities from the buoys were compared with observations of moisture obtained from nearby ship reports, and the correlations were generally high (0.7–0.9). Surface gravity wave spectra were also acquired. The time series of specific humidity and the other buoy parameters revealed three primary scales of variability, small (h), synoptic (days), and seasonal (months). The synoptic variability was clearly dominant and occurred primarily during September, October, and November. Most of the synoptic variability was due to frontal systems that dropped down into the Gulf of Mexico from the continental US followed by air masses which were cold and dry. Cross-correlation analyses of the buoy data indicated that: (1) the moisture field was highly coherent over distances of 800 km or more in the northern Gulf of Mexico; and (2) both specific humidity and air temperature served as tracers of the motion associated with propagating atmospheric disturbances. These correlation analyses also revealed that the prevailing weather systems generally entered the buoy domain from the South prior to September, but primarily from the North thereafter. Spectra of the various buoy parameters indicated strong diurnal and semidiurnal variability for barometric pressure and sea surface temperature (SST) and lesser variability for air temperature, wind speed and significant wave height. The surface fluxes of latent and sensible heat were dominated by the synoptic events which took place from September through November with the transfer of latent heat being primarily from the ocean to the atmosphere. Finally, an analysis of the surface wave observations from each buoy, which included calculations of wave age and estimates of surface roughness, indicate that major heat and moisture flux events coincide with periods of active wave growth, although the data were insufficient to identify any causal relationships.     

叠合施工法在结构转换梁施工中的应用

简要介绍了叠合结构的基本理论,针对钢筋混凝土结构施工中混凝土浇筑量较大的支撑施工问题,利用叠合结构中先浇筑的钢筋混凝土进行结构施工承载,在保证工程质量、缩短工期、降低施工成本方面,效果显著。     

分层饱和土中横向受荷桩动力阻抗分析方法

考虑饱和土的成层性和孔隙流体与土骨架变形的相互作用,用积分变换方法构建盘面和柱面荷载作用下土体与结构动力相互作用影响函数,用边界元方法建立相应的考虑饱和土成层性的地基与桩基础动力相互作用分析方法。以层状饱和土中横向受荷桩动力阻抗分析表明分析方法的可行性。     

线路圆曲线半径、缓和曲线长度和线间距标准制定依据的介绍

着重介绍《新建时速 2 0 0公里客货共线铁路设计暂行规定》(以下简称《暂规》)中 3个主要线路平面设计标准的拟定原则 ,计算方法和参数选择的思路。《暂规》期望 ,这些思路有助于提高线路平面质量 ,使线路有可能达到“少维修”的水平 ,从而满足新建时速 2 0 0km客货共线铁路安全、舒适和不间断运营的要求     

气泡动力学数值模型的稳定性研究

基于势流假设,建立气泡动力学数值模型,并开发计算程序.系统地分析了不同模型、不同单元类型的计算精度,以及网格划分、时间步等因素对计算结果的影响,验证了本文数值模型的收敛性,并在计算过程中分析了动能、势能及总能量随时间的变化.为考核文中建立的气泡动力学计算模型的有效性,分别将轴对称模型及三维模型与Rayleigh-Plesset气泡模型的精确解及实验数据、实验照片进行了对比分析,分析表明,计算结果与Rayleigh-Plesset模型及实验数据吻合很好,表明文中建立的计算模型是可行的、有效的.并分析了气泡在重力场中的运动特性.     

桥面铺装防水粘结层材料类型的选择

文章针对沥青混凝土桥面铺装结构的防水粘结层性能受到桥梁类型、荷载条件和工作环境等因素影响而难于选择的问题,对各类桥面铺装防水粘结层的使用条件和结构性能进行了研究,分析了各种结构性胶黏剂的物理性质和化学性质及工艺条件,据此制定了桥面铺装防水粘结材料的选择依据,并提出了一种性能较好的粘结剂典型配方。     

钢筋混凝土箱形拱桥现浇施工方案比较

钢筋混凝土箱型拱桥在无支墩拱式拱架上现浇施工时,若跨度较大,拱圈一般采用分环分段的施工方法。采用该方法施工时,先期形成的混凝土拱环与拱架的横向联合作用明显。通过两种分环方案的对比分析发现,不同的分环方案横向联合作用强度也有所差别。采用一个最优分环方案,可以利用已形成的拱环与拱架在横向的。联合作用,增加横向刚度,有利于提高施工过程中的横向稳定性。     

有软弱下卧层时确定天然地基上基础底面积的简便方法

在进行天然地基上浅基础的设计时,必须验算地基承载力.如果存在软弱下卧层,还必须进行软弱下卧层承载力验算.     

保温新材料新工艺介绍

文章就国家专利产品复合花纹铝板、三防保温被两种保温新材料新工艺产品进行介绍。说明了这些新材料新工艺在海上采油平台和船舶行业的应用。     

空间不均匀湍流边界层激励下声呐腔自噪声统计能量分析

利用统计能量分析法建立了湍流边界层激励下水下航行器声呐腔自噪声水动力分量的计算模型。采用一种新的回转体模型模拟声呐罩，重点讨论空间分布不均匀的湍流边界层对声呐罩的输入功率的计算及统计能量分析参数的确定，利用Fluent软件计算边界层的分离点及一些重要参数。最后给出了一具体的算例。可作为空间不均匀湍流边界层激励下声呐腔自噪声的工程估算的参考。