基于数字信号处理的直接转矩控制研究

直接转矩控制因控制简单、具有优良的动静态特性，在电机控制中应用越来越广泛。但它在低速区的局限也较多。随着数字信号处（Digital Signal Processing，缩写DSP）技术的发展，使得改善其低速控制特性成为可能。文中简介了直棼转矩控制技术的特点、控制原理及难点，探讨了一种应用DSP技术的直接转矩控制方法。     

新加坡电力蓄电池双能源工程车空电混合制动技术研究

文章介绍了新加坡电力蓄电池双能源工程车制动系统,阐述了空电混合制动的原则及主要内容,并针对地面联调试验中发现的混合制动问题进行分析,提出了解决方案。     

高速列车制动盘寿命预测系统设计与实现

基于断裂力学有关原理对制动盘寿命进行预测。根据应力强度因子理论，提出用断裂率Kr以及载荷率Sr为失效双判据的缺陷评定图对含裂纹的制动盘进行安全评定的方法。在VB环境下，以Paris公式为理论依据，对制动盘剩余寿命预测系统进行设计并实现。系统采用模块设计思想，能够根据给定的数据对制动盘进行快速有效的评估分析、合理评价及寿命预测，对提高我国高速列车基础制动系统的可靠性和安全性具有重要的实用价值。     

日本铁道车辆用合金铸铁闸瓦

介绍了日本铁道车辆用合金铸铁闸瓦的开发背景、经过及特点,并指出了合金铸铁闸瓦今后的发展方向。     

某车型液压制动软管台架耐久破裂原因分析与解决

文章简要介绍了制动软管台架耐久验证方法,针对台架耐久出现的故障,从仿真分析和台架进行原因确认。针对原因制订了优化方案,同样从仿真分析和台架对优化方案进行效果确认,问题得到了解决。     

摆式车辆液压缸载荷的确定

详细介绍了摆式车辆液压倾摆系统的机构动作、车体复原力矩与液压缸脉冲加载时间的确定和液压缸载荷的计算。     

Dynamics of railway wagons subjected to braking torques on defective tracks

It is well known that track defects cause profound effects to the dynamics of railway wagons; normally such problems are examined for cases of wagons running at a constant speed. Brake/traction torques affect the speed profile due to the wheel–rail contact characteristics but most of the wagon–track interaction models do not explicitly consider them in simulation. The authors have recently published a model for the dynamics of wagons subject to braking/traction torques on a perfect track by explicitly considering the pitch degree of freedom for wheelsets. The model is extended for cases of lateral and vertical track geometry defects and worn railhead and wheel profiles. This paper presents the results of the analyses carried out using the model extended to the dynamics of wagons containing less ideal wheel profiles running on tracks with geometry defects and worn rails.     

ISG hybrid powertrain: a rule-based driver model incorporating look-ahead information

According to European regulations, if the amount of regenerative braking is determined by the travel of the brake pedal, more stringent standards must be applied, otherwise it may adversely affect the existing vehicle safety system. The use of engine or vehicle speed to derive regenerative braking is one way to avoid strict design standards, but this introduces discontinuity in powertrain torque when the driver releases the acceleration pedal or applies the brake pedal. This is shown to cause oscillations in the pedal input and powertrain torque when a conventional driver model is adopted. Look-ahead information, together with other predicted vehicle states, are adopted to control the vehicle speed, in particular, during deceleration, and to improve the driver model so that oscillations can be avoided. The improved driver model makes analysis and validation of the control strategy for an integrated starter generator (ISG) hybrid powertrain possible.     

高速列车制动盘材料的研究进展

综述提高高速列车制动盘能量和降低盘重方面的研究成果。研究用C—C纤维复合材料、陶瓷材料、铝基陶瓷强化复合材料,以及材料表面强化技术等改善高速列车制动盘材料性能的问题。分析认为C—C纤维复合材料密度低、耐高温性能好,但表现出环境影响摩擦性能的问题;陶瓷材料具有优良的摩擦性能,但具有韧性低的问题;铝基陶瓷强化复合材料密度低,但面临着使用温度较低的问题;材料表面强化技术可提高钢盘的摩擦性能,但仍需要解决不同材料间的结合性能问题。     

绞吸挖泥船轴扭矩及功率测试

针对绞吸挖泥船轴扭矩及功率测试的问题,进行了现场测试和泥泵性能试验,介绍了一种绞吸挖泥船轴扭矩及轴功率测试试验装置。采用船舶应变片式轴功率测量方法,得出泥泵在850、900、950、1 000 r/min共4个转速下的泥泵性能参数;并对柴油机在945 r/min转速下,油门刻度18时的瞬时扭矩和平均扭矩进行计算。得出结论：在流量不变的情况下,泵的转速越高,扬程越高、功率越高;在流速在1~1.51 m3/s时,泥泵在4个转速下的水功率十分接近;随着流量的增大,转速越大,泵的水功率越高。