铁路路基动态变形模量的数值模拟分析

介绍铁路路基动态变形模量理论计算公式的推导及动态变形模量的测试原理,采用有限元软件模拟动态变形模量的测试过程,分析承载板与土体接触压力、路基动态变形模量的影响因素,并计算动态变形模量的有效测试深度.结果表明:在承载板中心一定范围内,接触压力模拟结果较理论计算值大;土体的动弹性模量对接触压力影响很小,可以忽略;路基动态变形模量测试冲击荷载作用下,土体只发生弹性变形;动态变形模量与土体动弹性模量呈线性关系,路基动态变形模量的模拟结果大于理论计算值;土体的泊松比对动态变形模量影响较小;动态变形模量有效测试深度建议取0.5~0.6 m.     

Modeling free-flow speed according to different water depths—From the viewpoint of dynamic hydraulic pressure

In this paper, we propose a method of modeling free flow speed from the viewpoint of hydroplaning. First, the lift forces for different water depths were estimated using Bernoulli’s equation. Compared with the result of the experimental test performed by the Japan Automobile Research Institute, the hydrodynamic pressure coefficient was determined to be 0.03 (tf s²/m⁴). The validation of the predicted lift force is found in another published paper. A very good match is found between the computed values by the proposed numerical model and the data in other published papers. Then, the loss of contact force is considered to evaluate the hydroplaning performance of a tire. To simulate the hydroplaning speed, a tire-sliding model was utilized to obtain the traction and friction forces between the road surface and the tire. The observation data obtained in Japan in 2009 is compared with the physically computed hydroplaning speed, yielding the conclusion that the traction force at the measured desired speed is, on average, 23.4% of the traction force at hydroplaning speed. The analytical model offers a useful tool to quantitatively show that the free flow speed changes as the water depth increase.     

Determination of limiting cavity depths for offshore spudcan foundations in a spatially varying seabed

The importance of accurate prediction of limiting cavity depths during offshore spudcan foundations installation has been variously highlighted in the literature. Nonetheless, most of the previous research is deterministic in nature and confined to homogenous soils. Since offshore clayey soils can be highly spatially variable, there is a practical need to take proper account of the spatial variability in the prediction of limiting cavity depths. In a bid to remedy this situation, large deformation finite element calculations combined with three-dimensional random fields were repeatedly conducted in this study within a Monte-Carlo framework. The continuous penetration of a spudcan initiated from surface was explicitly modeled until a full-localized flow-around mechanism was observed. Spatial variability was found to clearly affect the soil back-flow and thereby the limiting cavity depth, the latter of which takes a range of values that can be approximately modeled as a log-normal distribution. Characteristic limiting cavity depths at various probability levels were ascertained. An algebraic expression was proposed to explicitly predict the characteristic limiting cavity depths in random soils from the fractile. Particular attention was paid to the lower and upper 5% characteristic values, which are likely to be useful for reliability-based design.     

海上风电大直径单桩基础固有频率影响因素的数值分析

针对海上风电整机结构其低阶固有频率的控制问题,基于有限元分析技术开展小直径桩土相互作用的数值模拟分析,与试验结果、API规范计算结果进行对比,验证了数值模型的适用性,分析大直径单桩结构桩内土芯、冲刷深度、表层土置换措施对整机固有频率的影响,结果表明,基于有限元实体单元计算所得一、二阶整机固有频率要明显大于传统p-y方法计算结果;桩内土芯对一、二阶整机固有频率影响很小;在一定范围内,随着泥面冲刷深度的增加,一、二阶固有频率降低不明显,认为传统p-y方法对于大直径单桩的适用性有待研究;在实际工程设计中,桩内土芯的影响可忽略;对于大直径单桩,在一定范围内可以忽略冲刷的影响。     

鱼雷定深航行稳定性的分叉分析

鱼雷定深运动方程含有诸多的非线性项，用传统的分析方法对其稳定性进行研究有较大难度。运用非线性科学中的分叉理论，选定鱼雷定深运动方程中的某一流体动力系数扰动值为分叉参数，系统地分析在经典比例微分深度控制系统作用下，鱼雷在退化平衡点处的航行稳定性。利用中心流形定理，推导出系统状态变量解析表达式，对系统 Hopf分叉进行分析，并进行仿真验证。结果表明，流体动力系数变化使定深航行产生 Hopf分叉，并给出了确保鱼雷稳定航行的流体动力参数取值范围。     

桩基施工中的坍孔原因与预防措施

对在一般河流上钻(冲)孔过程中出现坍孔原因进行分析,并提出了坍孔预防措施.     

海底埋设管线平管起吊运动分析

基于有限元软件OrcaFlex,充分考虑不规则波浪、海流、管土相互作用以及船舶管线耦合运动,建立海底埋设管线平管起吊模型。参考DNV-RP-F110计算埋深管道受到的土壤阻力,依据DNV-RP-C205确定相关水动力系数。通过数值模拟研究分析管线在平管起吊过程中管道的运动响应以及吊绳张力的时间历程变化,为实际海底管线平管起吊提供一定理论参考。     

大比降卵砾石河流防护结构的冲刷深度研究

大比降卵砾石河流河床形态及水流条件特殊,治理难度相当大。当遇到较大的洪水时,堤防工程、公路等临河设施常发生水毁,而关于此类河流的研究成果较少。针对大比降卵砾石河流河床宽浅、滩槽不分、比降和流速大、枯水期水流分散易形成股流冲刷的特点,布置了不同床沙组成、冲刷角度、河床比降及流量的概化模型试验。通过对81组室内试验资料进行单因素分析,得知冲刷深度(Hp)与单宽流量(q)、河道比降(J)、冲刷角度(θ)成正比,与河床质颗粒组成(D)成反比。采用量纲分析法和多元回归分析法得到了冲刷深度的计算表达式。     

Prediction of Scour Depth around Offshore Pipelines in the South China Sea

Scour depth prediction of offshore pipelines is of great significance to the design and construction of the submarine pipeline projects. In this paper, based on the CFD software package FLUENT and User...     

汽车VS二轮车十字路口事故场景研究

为研究十字路口发生的汽车与二轮车事故场景,基于NAIS事故数据库中发生在十字路口的汽车与二轮车事故数据开展研究。选择描述十字路口事故关键参数,依据事故发生时环境照明、十字路口信号灯、汽车所在道路车道数、道路限速、汽车种类、汽车速度、汽车运动方式、第一碰撞点、二轮车种类、二轮车运动方式等参数,对事故数据进行聚类分析,得到5类主要危险场景。基于发生频率最大和骑车人死亡风险最高的场景具有危险场景代表性,最终得到2类十字路口汽车与二轮车的典型事故场景。为十字路口汽车与二轮车的冲突消解、避撞策略研究提供参考。