LED综合节能照明装置在地铁工程中的应用

以深圳地铁2号线工程为例,讨论发光二极管(LED)综合节能照明装置的使用范围、类型参数、技术要求、控制方式,分析异型LED照明装置的布置情况,并对其节能效果进行评估。结果表明,单套LED综合节能装置能接收欧洲安装总线(EIB)控制系统的带有数字可寻址灯光照明接口(DALI)的调光信号,单灯具备可连续调光功能,可使整个车站根据不同模式及运营需求进行整体调光,具有明显的节能优势,且不会降低使用要求。     

W203型地铁牵引轨道车车体强度分析

文章介绍了W203型地铁牵引轨道车的车体结构形式、车体强度载荷工况、有限元静强度分析计算结果和疲劳强度计算结果、车体静强度试验验证,结果表明车体强度满足设计及标准要求。     

上海市公交柴油车碳烟排放的评估与分析

介绍了上海市道路交通以及公交汽车拥有量的发展；按照发动机购置年份、机型以及车队等统计上海市公交柴油车碳烟排放状况；追踪某一车队同一机型连续几年来的百公里油耗以及碳烟排放水平，分析了影响公交柴油车碳烟排放的各种因素；最后从管理方面提出加强I／M制度以降低公交柴油车碳烟排放。     

汽车车身复杂钣金件的拓扑优化设计

利用有限元方法，结合零件的造型、约束、受力和模态等特点，对汽车车身复杂钣金件进行了拓扑分析和设计。利用激光模态分析仪对实物进行了模态测量，分析结果和测量结果基本一致。从而验证了拓扑优化方法可以用于复杂钣金件的设计，并可以获得最佳的结构和力学特性。     

CARD/1系统在互通立交设计绘图上的应用与开发

通过对CARD/1系统在T型（Y型）互通式立体交叉设计绘图上的二次开发，使T型（Y型）互通式立体交叉的设计绘图达到一体化。     

后置发动机城市公交车冷却系统的定性分析

简要介绍后置发动机城市公交客车冷却系统的布置结构,定性分析影响后置发动机城市公交客车冷却系统散热效果的各种原因,明确提高冷却系统散热效果的途径以及设计中的处理建议、注意事项等。     

基于CCP协议的HEV用ECU标定系统设计

CCP协议是基于CAN总线通信方式的车用ECU标定协议，具有通信可靠、传输速度快、通用性好等优点。在实时内核环境下设计了一套基于CCP协议的标定系统，并使用该系统实现了对混合动力电动汽车(HEV)动力系统中多个ECU同时标定的工作。     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

汽车车身结构碰撞性能的试验研究

为了在碰撞事故中有效地保护乘员的生命安全，汽车首先必须具备安全车身，以确保事故中乘员的生存空间及缓和冲击，其后应配置合理的乘员约束条件，以避免或减缓乘员与车内结构二次碰撞造成的灾害。详细介绍了车身构件碰撞性能的试验方法和研究结果。     

车身内部布置CAD系统及其应用

介绍了自行开发的汽车车身内部布置的ＣＡＤ系统，并就系统在设计中的应用了说明。该系统是在通用图形软件基础上进行二次开发而成的，以ＳＡＥ标准，ＥＥＣ标准及为主要依据，将ＣＡＤ技术运用到车身内部布置设计中。