汽车系统单元化集成设计中相似性与复杂性

基于相似性科学和相似系统理论，研究了汽车系统中单元特征相似性分析方法，汽车系统相似性度量方法，相似单元设计和单元化系统集成设计中的相似性与差异性变化引起的复杂性。提出了以系统相似性度序列变化和差异性，集成设计系列化、多样化、个性化汽车产品系统新的理论方法。     

根据墩台抗推刚度分配梁式桥的水平力

在水平荷载作用下，梁式桥的合理计算在工程中具有较大的意义。本文揭示各墩台所分摊的水平力与组合墩台^①抗推刚度大小成正比。这个计算方法概念清楚、计算简单，便于实践中应用。     

发动机排气有源消声技术研究进展及发展趋势

简要介绍了发动机排气噪声的特点及其有源消声治理方法;就发动机排气有源消声技术的关键环节及其最新研究情况作了详尽的归纳和总结。评述了目前研究中尚存的问题与不足,并预测了其研究发展趋势。     

摩托车曲轴箱通风试验与研究

四冲程摩托车用曲轴箱通风系统应当改进。试验研究表明:改进进气管真空度、强制吸气和改进化油器喉管的方案可以减少污染、节省燃油、延长更换机油时间(节省机油)并使机件润滑得更好,从而延长机件使用寿命。四冲程摩托车用曲轴箱通风装置的应用研究有广阔的前景。     

摩托车道路行驶阻力分析与测量

分析了摩托车道路行驶阻力的数学模型,并在天津摩托车技术中心试验场对某125型摩托车采用滑行能量法进行了滑行参数测量。用最小二乘法拟合出摩托车的行驶阻力曲线,并将该曲线在不同速度下的阻力数值与当量惯量法的阻力数值进行了比较,二者达到了很好的统一。     

POLO车载收放机的使用研究及改装

对POLO、BORA、PASSAT等车载收放机的使用进行研究;对收放机如何进行改装以使得外部音频信号可以输入收放机,以及充分利用车载音响系统来播放进行了详细的说明和阐述。     

基于CCP协议的HEV用ECU标定系统设计

CCP协议是基于CAN总线通信方式的车用ECU标定协议，具有通信可靠、传输速度快、通用性好等优点。在实时内核环境下设计了一套基于CCP协议的标定系统，并使用该系统实现了对混合动力电动汽车(HEV)动力系统中多个ECU同时标定的工作。     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

深圳市“5.24”暴雨洪水灾后的反思

1998年5月24日，深圳市暴雨成灾，经济损失很大。本文总结和分析了暴雨洪水的特性及其成灾的原因，提出防洪减灾的措施和建议。     

以位移为基础的钢筋混凝土连续梁桥抗震设计方法

利用等效线性化方法将钢筋混凝土(RC)连续梁桥结构简化为多自由度线弹性体系,采用振型反应谱的概念研究了结构在横向地震作用下考虑多阶模态效应的直接基于位移的抗震设计方法。探讨了连续梁桥的上部结构(主梁)及桥墩(台)刚度的变化对结构横向振动模态质量与模态周期的影响,给出了多阶模态设计方法的具体设计过程。对对称与非对称连续梁桥采用相同的设计步骤进行基于位移的抗震设计,并对设计算例用非线性时程分析验证了设计结果的合理性。