200km/h六轴大功率客运交流传动电力机车概述

介绍了200 km/h六轴大功率客运交流传动电力机车的主要技术特点、性能参数、总体结构,以及通风系统、电气系统、机械系统、制动系统等子系统的技术方案。     

主变压器差动保护装置极性问题的探讨

阐述牵引变电所三相V/v接线牵引变压器差动保护极性的影响因素及其校验方法（微机保护的极性、主变压器的极性和电流互感器的极性3方面）,分析了包西线某牵引变电所主变压器设计和接线的缺陷,提出并验证了三相V/v接线牵引变压器差动保护接线方式的正确性。     

利用钢轮托车辅助盾构机过站施工技术

针对地铁盾构法施工中盾构机通过满足过站要求的已完工车站进行二次始发这一常见施工环节,介绍一种通过钢轮托车辅助盾构机空载推进实现过站需要的施工技术及相应施工要点,如盾构机过站的施工工艺流程,钢板、钢轮拖车及轨道的铺设等。论述了利用钢轮拖车辅助盾构机过站施工技术采取的质量控制、安全措施及环保措施,分析了采用该技术的经济、社会和环境效益。     

变频器输出电压du/dt对电机的影响及其滤波器的设计

研究了变频器输出电压du/dt对电机端电压和轴承电流的影响,在PSpice中建立了电机高频模型,并对端电压波形进行了仿真;着重研究了一种du/dt滤波器的参数设计方法,并且进行了仿真和实验验证。实践证明,该滤波器具有较好的滤波效果。     

LED综合节能照明装置在地铁工程中的应用

以深圳地铁2号线工程为例,讨论发光二极管(LED)综合节能照明装置的使用范围、类型参数、技术要求、控制方式,分析异型LED照明装置的布置情况,并对其节能效果进行评估。结果表明,单套LED综合节能装置能接收欧洲安装总线(EIB)控制系统的带有数字可寻址灯光照明接口(DALI)的调光信号,单灯具备可连续调光功能,可使整个车站根据不同模式及运营需求进行整体调光,具有明显的节能优势,且不会降低使用要求。     

上海市公交柴油车碳烟排放的评估与分析

介绍了上海市道路交通以及公交汽车拥有量的发展；按照发动机购置年份、机型以及车队等统计上海市公交柴油车碳烟排放状况；追踪某一车队同一机型连续几年来的百公里油耗以及碳烟排放水平，分析了影响公交柴油车碳烟排放的各种因素；最后从管理方面提出加强I／M制度以降低公交柴油车碳烟排放。     

CARD/1系统在互通立交设计绘图上的应用与开发

通过对CARD/1系统在T型（Y型）互通式立体交叉设计绘图上的二次开发，使T型（Y型）互通式立体交叉的设计绘图达到一体化。     

后置发动机城市公交车冷却系统的定性分析

简要介绍后置发动机城市公交客车冷却系统的布置结构,定性分析影响后置发动机城市公交客车冷却系统散热效果的各种原因,明确提高冷却系统散热效果的途径以及设计中的处理建议、注意事项等。     

基于CCP协议的HEV用ECU标定系统设计

CCP协议是基于CAN总线通信方式的车用ECU标定协议，具有通信可靠、传输速度快、通用性好等优点。在实时内核环境下设计了一套基于CCP协议的标定系统，并使用该系统实现了对混合动力电动汽车(HEV)动力系统中多个ECU同时标定的工作。     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.