路用矿质混合料的级配设计及其优化

对于路用矿质混合料级配设计及其优化,可针对设计及其优化的不同要求创建相应的数学模型,处理办法是将设计与优化有机的结合在一起,以设计要求作为约束条件,以优化为目标,设计与优化一并完成.该法可用于各类矿质混合料的级配设计,且其中相关模型的求解亦分别有成熟的计算手段或程序可资利用,非常方便和适用.     

孔结构对水泥混凝土性能的影响研究

介绍水泥混凝土中孔结构的分析测试方法,着重分析孔结构对水泥混凝土的力学性能、低温性能、抗渗性能的影响,探讨孔结构对混凝土的作用机理,提出了改善水泥混凝土孔结构的措施,并对今后的研究重点给出了建议。     

旧砼路面板上沥青加铺层直道试验研究

对不同结构方案下的旧水泥混凝土路面板上沥青混凝土加铺层结构进行直道试验,分析研究了不同轴重及荷载次数作用下的接缝弯沉差、车辙变形以及路面的疲劳特性,并对比了沥青加铺材料及结构优劣性.结果表明,在不同轴载的反复作用下,所研究的新型沥青混凝土材料在接缝路表弯沉、车辙变形量和路面结构的抗剪切疲劳特性等方面都优于普通的AC-20沥青混凝土.     

公路水泥混凝土路面基层顶面当量回弹模量非线性计算公式归一化的研究

鉴于1994年和2002年水泥混凝土路面设计规范中,基层顶面当量回弹模量确定过程存在的繁琐性,有必要通过回归分析,对2002年规范所提供的六个计算公式加以简化。实践表明,该简化能够满足计算要求并取得满意的效果。     

水泥混凝土裂缝成因的分析与处理

水泥混凝土产生裂缝是目前工程建设中普遍存在的质量通病,对裂缝的成因进行分析并提出预防措施和处理方法．是一项十分重要的工作。     

Property Evolution of Sulphoaluminate Grouting Material under Pressure Circulation北大核心CSCD

Water-sealed underground oil tank projects are quite different from traditional underground projects since the water-sealing conditions are very strict and the difficulties caused by the geological specificity, structural specificity and construction specificity are key factors affecting the project. In light of the significant early initial setting time and rapid temperature increase of sulphoaluminate cement-based grouting material for a large domestic water-sealed underground oil tank with pressurized cyclic grouting, a laboratory grouting simulation is conducted. It is found that the properties of the sulphoaluminate cement-based grouting material are quite different under different pressure cycles, the hydration exothermic peak time gets shorter with an increase of circulation time, the compressive strength decreases with an increase of circulation time, and the longer the circulation time the more obvious the de-crease of compressive strength. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

水泥稳定砂砾就地冷再生工艺及其节能环保意义

道路损坏后路基和路面材料的再生利用不仅能够节约大量宝贵的筑路材料,而且具有重要的环境保护意义。采用冷再生技术将原有旧路面材料以专用机械作业方式进行就地再生,并将其作为水泥稳定砂砾摊铺在原有道路上并作为新铺道路的基础是实现上述理念的成功尝试。     

穿越古滑坡川主寺隧道围岩破坏特征及稳定性研究

文章以川主寺隧道所处的工程地质条件为基础,通过现场调研分析了隧道围岩变形破坏形式主要为坍塌、掉块以及剥落.围岩稳定性三维有限元数值模拟结果显示,碎裂围岩自稳能力差,围岩变形以弹塑性变形、松弛变形为主;H型钢拱架支护结构对碎裂围岩稳定性起到积极的作用,并通过典型洞段现场位移监测数据分析结果得以证实.     

板裂围岩结构弯曲失稳分析

文章分析了板裂结构地质背景及板裂介质岩体特征,研究了板裂围岩破坏模式及力学机理,并结合工程实例,利用随机有限元模型对板裂结构屈曲破坏进行分析。