广州地铁6号线的隧道通风设计

广州地铁6号线穿越老城区,因此隧道通风设计的控制因素较多.通过简化和输入合理的边界条件和参数,运用SES程序对该线路进行计算,针对隧道内温度和风量进行分析.指出在现有配置隧道通风系统的情况下,深埋隧道内近、远期的全线温度满足要求;单端设置活塞风井的"活塞效应"作用较大,隧道区间换气量达到《地铁设计规范》规定,且增设消声器对活塞风道的作用影响不大,设计优化、合理.     

长沙南湖路湘江隧道通风方案初探

基于我国的经济技术发展现状及趋势,借鉴公路隧道通风的相关设计理论、原则以及国内已建类似工程的经验,针对长沙市南湖路湘江隧道的工程特点,探讨并分析影响该隧道通风方案确立的因素,提出既满足隧道内的行车安全和洞外环保要求,又有利于降低工程造价和减少运营费用的通风方案。     

浅析高速公路过境方式与城市布局的关系

高速公路过境模式与城市空间形态有着密切的关系,不同的城市空间形态要求高速公路采取不同的过境方式．而高速公路不同的过境方式对城市空间形态的形成有着决定性的影响。     

景婺黄高速公路蛟岭隧道施工中瓦斯处治方法研究

通过对江西省景婺黄高速公路蛟岭隧道施工中所遇到的瓦斯情况进行分析,并总结其经验教训从设计完善、瓦斯防治、结构措施等角度,提出一些处治方法和建议,经实践证明是行之有效的,可供同类工程借鉴与参考。     

Open Inventor在隧道交通仿真中的应用

介绍了三维图形软件包Open Inventor特点及其相关技术．并就其在隧道交通仿真中的应用为例。详细阐述了Open Inventor在虚拟场景建立。三维漫游,仿真数据可视化等方面的应用。     

缓冲结构减缓高速铁路隧道出口微压波数值比较

研究了高速铁路隧道出口微压波产生机理,结合一维可压缩非定常不等熵空气流动理论和无限大障板圆形活塞辐射理论,应用数值计算方法研究了不同形状缓冲结构条件下高速铁路隧道出口附近微压波规律。通过对缓冲结构形状以及各种参数计算结果进行定性与定量对比,发现对于截面积变化的线型、抛物线型和不连续型缓冲结构,随着长度和端口截面积增加,隧道出口附近微压波强度衰减较大,其中不连续型缓冲结构综合效果最佳;而截面积为常量,具有开孔的缓冲结构,虽然也可较大幅度降低隧道出口附近微压波强度,但是需要综合比较才能选取最佳结构参数。     

Sustainability and interactivity between cities and ports: a two-stage data envelopment analysis (DEA) approach

Ports and cities are intrinsically linked. Port city, which serves as a link between the local and global economy, is an integration of both urban and port systems. Constrained by different regional structures, port cities have developed various formulations over time. Using a two-stage data envelopment analysis (DEA) approach, this paper proposes a new method for measuring the sustainable development of different port city systems. While the previous empirical studies often separate the port system and the urban system, this paper assesses the two systems in an integrated way. Moreover, this paper develops a systematic methodology for measurement of sustainability. Twenty world-leading container port cities are selected for this study using contemporary data. The DEA results display their relative differences in levels of sustainable development, which reveal the effectiveness of the prevailing policies in them. Eventually, recommendations are drawn for other port cities by referring to the best practices.     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Effect of Explosion in a Gas Pipeline Compartment of a Utility Tunnel on Neighboring Metro Tunnels北大核心CSCD

In this paper the numerical simulation analysis of the effect of explosion in the gas pipeline compartment of a utility tunnel on neighboring metro tunnels was conducted using the software AUTODYN. The results show that the TNT equivalent in a fireproof partition with length of 200 m is 41.6 kg when the gas concentration in the gas pipeline compartment reaches 10%; the blast wave has much effect on the crown and arch waist of the round metro tunnel and it’s necessary to take some protective measures in both areas; when the surrounding soil is sand, the utili- ty tunnel is above the round metro tunnel and their alignments are in the same direction, the greater the vertical spacing between the utility tunnel and the metro tunnel, the smaller the effect of the blast wave on the metro tunnel; when the vertical spacing is 7.2 m, the maximum dynamic tensile stress is 1.86 MPa (including the static stress value of 1 MPa in the tunnel segment) and it is slightly smaller than the designed tensile strength of metro tunnel (about 1.89 MPa). The maximum vibration velocity and the maximum displacement meet the structural stability require- ments, so it is suggested the vertical spacing between the utility tunnel and metro tunnel shall not be less than 7.2 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Soil Body Deformation Caused by Construction of a Double-Line Shield Tunnel with Multiple Factors北大核心CSCD

Considering the influence of many factors (soil loss, frontal additional thrust, the friction force of the shield shell and the additional grouting force), a method for improving the uniform soil body movement model is pro-posed, and a mechanical calculation model is established to study the calculation method for soil body deformation caused by double-line parallel shield driving. Based on the Mindlin solutions of elastic mechanics, the theoretical solutions for soil body deformations caused by the last three factors are calculated; considering the uniform soil body movement model, the theoretical solutions for soil body deformations caused by soil loss are calculated, then the to-tal theoretical solutions for soil body deformations under multiple factors are obtained by means of superposition. The vertical surface settlement, vertical horizontal displacement, and vertical displacements of the soil body at different depths of Hangzhou Metro Line 1 are calculated to analyze the variation laws. Meanwhile the influential factors for horizontal displacement variation are studied. The research shows that with a change of depth, the settlement of the soil body changes within the scope of 10 to 13 m in the horizontal direction near where the maximum settlement occurs;the direction of the horizontal displacement of the soil body changes with a change of the positional relationship be-tween the calculation points and the tunnel; and with an increase of interval J for the two tunnels, the horizontal dis-placement of the soil body of a deep double-line tunnel decreases while the displacement near the surface changes slightly. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.