优化广西铁路建设项目顺序研究

在综合分析国家及区域十二五经济社会发展规划、中长期铁路网规划等规划基础上,预测研究年度区域各铁路客货运量、构成及其未来发展趋势;分析各铁路项目的功能定位及其在区域路网中发挥的运输效益;综合考虑经济效益、社会效益及国家宏观经济政策,提出优化广西铁路建设项目顺序和提高运能的方案,达到提前发挥投资效益的目的。     

客车车架有限元分析及尺寸优化

以某客车车架为对象,利用HyperWorks建立了车架的有限元模型并对其进行了刚度和模态分析,在此基础上,以质量最小为目标,在不降低刚度和模态性能的前提下,对车架进行了尺寸优化。     

Experimental and numerical investigation on the derailment of a railway wheelset with solid axle

This paper presents the results of an experimental and numerical investigation on the derailment of a railway wheelset with solid axle. Tests were carried out under quasi-steady-state conditions, on a full-scale roller rig, and allowed to point out the effect of different parameters like the wheelset's angle of attack and the ratio between the vertical loads acting on the flanging and non-flanging wheels. On the basis of the test results, some existing derailment criteria are analysed in this paper and two new criteria are proposed. A model of wheel–rail contact is proposed for the mathematical modelling of the flange climb process, and numerical vs. experimental comparisons are used to obtain model validation.     

Fault tolerant nonlinear control with applications to an automated transit bus

This paper presents an integrated structure for a passive and active fault tolerant control (FTC) design approach in the framework of a robust nonlinear control technique called Dynamic Surface Control (DSC). As motivated by the automated vehicle application, we consider two categories of possible faults: pre-specified (a priori) and non-specified faults. It is first shown that DSC can be considered as a passive FTC approach in the sense that it gives simultaneous robust stability to a set of nonlinear systems even in the presence of model uncertainties and the pre-specified faults. Then, the non-specified fault is classified depending on the fault’s impact on the closed-loop system and isolatability from a fault detection and diagnosis (FDD) system. If a fault is both intolerable and isolatable, an active FTC approach is taken which includes FDD and controller reconfiguration. More specifically, trajectory reconfiguration is considered to accommodate the actuator fault, i.e., to compensate for the performance loss due to the fault within the framework of a switched hierarchical structure. Finally, the integrated structure for the longitudinal control of an automated transit bus is designed through the proposed method. Simulation results of the fault tolerant controller are shown for both single and multiple multiplicative faults. This controller was implemented on the California PATH transit buses in a demonstration of automated public transportation technology in San Diego, California in August of 2003.     

Fault classification method for the driving safety of electrified vehicles

A fault classification method is proposed which has been applied to an electric vehicle. Potential faults in the different subsystems that can affect the vehicle directional stability were collected in a failure mode and effect analysis. Similar driveline faults were grouped together if they resembled each other with respect to their influence on the vehicle dynamic behaviour. The faults were physically modelled in a simulation environment before they were induced in a detailed vehicle model under normal driving conditions. A special focus was placed on faults in the driveline of electric vehicles employing in-wheel motors of the permanent magnet type. Several failures caused by mechanical and other faults were analysed as well. The fault classification method consists of a controllability ranking developed according to the functional safety standard ISO 26262. The controllability of a fault was determined with three parameters covering the influence of the longitudinal, lateral and yaw motion of the vehicle. The simulation results were analysed and the faults were classified according to their controllability using the proposed method. It was shown that the controllability decreased specifically with increasing lateral acceleration and increasing speed. The results for the electric driveline faults show that this trend cannot be generalised for all the faults, as the controllability deteriorated for some faults during manoeuvres with low lateral acceleration and low speed. The proposed method is generic and can be applied to various other types of road vehicles and faults.     

格拉斯磁环匀强磁场分析

以毕奥-萨伐尔定律为基础,建立亥姆霍兹线圈以及格拉斯磁环中心磁场分布模型,并计算了它们内部的轴向磁感应强度分布,绘出了空间分布图,分析了轴向磁感应强度与x、y坐标的关系,分析结果得到了亥姆霍兹线圈和格拉斯磁环内部匀强磁场分布区域,通过比较得到格拉斯磁环内部的匀强磁场区域比亥姆霍兹线圈内部的匀强磁场分布区域更大的结论。     

网络计划工期－费用的动态规划决策

关键路线法中网络计划工期－费用优化，可以化为一系列单阶段决策，构成确定性离散优化决策问题，本文试用动态规划处理这一过程。     

柴油机船舶推进装置的建模和实时仿真

本文根据准稳态的概念建立了适用于实时仿真的二冲程柴油机船舶推进装置的多阶一性模型。在充分多的试验数据的基础上，结合工作原理建立了各子系统及整个装置的动态模型，这种模型既能反映柴油机内部各参数，精度较高，计算工作量也比较适中。文中提出了一些经验公式，使模拟得以有效地简化。最后，作为实例给出了３５０００吨油船推进装置的实时仿直     

可吊双40 ft箱的岸边集装箱起重机

目前世界上的集装箱起重机一次只能吊起一个40ft箱或2个20ft箱,ZPMC针对超巴拿马型船而开发的双40岸桥1次可吊起2个40ft箱。双40岸桥的重要特色是开发了专用的差动型起升齿轮减速箱,它可以根据电机和制动器的不同工作组合工况,实现功率的分解和叠加,既可2套吊具同时起升,也可2套吊具各自独立起升或1套吊具起升1套吊具不动,使用1套吊具时也能实现高速高效。该机是对成熟常规岸桥的改进与创新,设备成本增加不多,轮压增加不大,理论上可使装卸效率提高50% ~60%。     

大水位差集装箱码头新型装卸搬运设备方案

依托重庆寸滩集装箱码头建设条件,对山区河流大水位差条件下专业集装箱码头新型装卸搬运设备进行分析研究,提出了多个先进的、有特点的方案,供西部地区集装箱码头建设参考。