高速列车与铁路简支组合梁动力相互作用仿真分析

针对中小跨度上承式钢板梁桥在提速时横向振幅过大的问题,提出将钢板梁桥改造成组合桥梁。应用MSC/DYTRAN大型软件对改造后的32m简支组合梁结构进行桥梁动力特性及列车走行性分析。结果表明,当运行速度在140~220km.h-1时,机车车辆的乘客乘座舒适度满足良的标准,改造后简支组合梁结构满足高速旅客列车速度小于220km.h-1的走行性要求。     

客运专线选线主要设计原则和特点

从满足旅客乘坐舒适度,力求使线路短直,做到系统最优,与城市规划结合,节约用地,环境保护,合理处理与军方关系、文物保护等几个方面,阐述客运专线选线设计原则和特点。     

基于速度动态函的LTE-R越区切换优化算法

传统的LTE-R越区切换算法,采用固定切换迟滞门限和延迟触发时间的切换算法。但是当列车高速运行时,切换成功率明显下降,无法满足高速铁路无线通信系统对Qo S大于99.5%的要求。通过对切换流程、测量参数、控制参数的分析,提出一种基于速度动态函数的越区切换优化算法。该算法在低速、中速、高速3种列车运行状况下,更适宜高速铁路情景切换时机的选择。仿真结果表明:基于椭圆函数的LTE-R越区切换优化算法,既保证了列车在中高速运行时,越区切换成功率有着明显提升,又避免了列车在中低速运行时,乒乓切换事件频率过高。     

大鼠背外侧索中对侧传入的上行纤维的分布和电生理学特征

在大鼠胸髓下段,用分离细束法研究背外侧索中对侧传入的上行纤维的分布和电生理学特征,发现该类纤维主要分布在背外侧索的背侧浅层,与同侧上行纤维相混杂.主要生理学类型为毛单位、低阈单位和毛-低阈混合单位等.对电刺激感受野的反应,一些单位表现出单突触,低阈值的特点。结果表明大鼠背外侧索中有交叉上行纤维,其分布和外周传入特性与脊颈束相似。     

模态试验分析对解决汽车振动问题的应用

针对某车辆在行驶试验时,在车速57 km/h时出现低频5.4 Hz的驾驶室异常振动的现象,振动形式为俯仰振动,人体乘坐舒适性主观感觉很差。先后采用多种常规振动分析试验方法对该车进行振动分析,也未能分析出引起驾驶室异常振动的原因。最后对该车的车架和驾驶室进行模态试验分析,分析判断得出该车在行驶时驾驶室异常振动的频率与车架整体一阶弯曲时的接近,由此判断该车驾驶室异常振动是由车架整体-阶弯曲引起的。根据试验分析结果,文章最后对某车问题的改进方案综合评价后提出了合理的改进方案。     

Actively controlled vehicle suspension with energy regeneration capabilities

The paper presents an innovative dual purpose automotive suspension topology, combining for the first time the active damping qualities with mechanical vibrations power regeneration capabilities. The new configuration consists of a linear generator as an actuator, a power processing stage based on a gyrator operating under sliding mode control and dynamics controllers. The researched design is simple and energetically efficient, enables an accurate force–velocity suspension characteristic control as well as energy regeneration control, with no practical implementation constraints imposed over the theoretical design. Active damping is based on Skyhook suspension control scheme, which enables overcoming the passive damping tradeoff between high- and low-frequency performance, improving both body isolation and the tire's road grip. The system-level design includes configuration of three system operation modes: passive, semi–active or fully active damping, all using the same electro-mechanical infrastructure, and each focusing on different objective: dynamics improvement or power regeneration. Conclusively, the innovative hybrid suspension is theoretically researched, practically designed and analysed, and proven to be feasible as well as profitable in the aspects of power regeneration, vehicle dynamics improvement and human health risks reduction.     

An investigation into the effect of suspension configurations on the performance of tracked vehicles traversing bump terrains

This is a theoretical investigation into the effect of various suspension configurations on a tracked vehicle performance over bump terrains. The model developed is validated using published experimental data of the modal characteristics of the vehicle. The desired performance is based on ride comfort via the mixed objective function (MOF), which combines the crest factor of bounce acceleration, bounce displacement, angular acceleration, and pitch angle. The optimisation process involves evaluating the MOF for different numbers and locations of dampers and under different rigid bump road conditions and speeds. The system responses of the selected suspension configurations in the time and frequency domains are compared against the undamped suspension. The results show that the suspension configurations have a significant effect on the vehicle mobility over bump road profiles. For a five-road–wheel half model of a tracked vehicle, the maximum number of dampers to use for ride comfort over these road bumps is three with the dampers located at wheel positions 1, 2 and 5. This confirms the current practice for many tracked vehicles with 10 road wheels. However, it is further shown that the suspension fitted with two dampers at the extreme road wheels offer the best performance over various rigid bump terrains.     

高速铁路线路参数与线路方案动力分析研究

线路线形条件对高速铁路行车安全性及乘坐舒适性的影响显著增强。我国在制定高速铁路规范时,总结吸收国内外建设及运营管理经验,提出了较高的线形标准。采用动力仿真分析方法对高速铁路参数进行探讨,对高速铁路线路关键参数进行分析,提出线路平、纵断面关键参数合理取值。针对京沈高铁试验段开展更高速度综合实验,对线路线形方案开展动力学分析及评估。提出线路圆曲线、反向曲线夹直线最小长度、竖曲线最小半径关键参数合理取值,可有效减少工程建设投入;通过对京沈高铁试验段开展更高速度综合实验,对线路线形方案开展动力学分析及评估,提出通过增加8 000 m曲线半径超高的方法,提高速度400 km/h列车舒适度。     

湛江港某钢结构转运站（TH10）振动分析

港口转运站投入使用后出现振动的现象比较多。采用现场测试和有限元分析两种方法，分析湛江港某钢结构转换站（TH10)产生振动的原因并采取相应的措施，使振动情况得到很大的改善，符合人体的舒适度范围。为以后类似问题提出解决思路和建议：针对跨度较大的楼面，设计时应考虑增加跨中部位的水平和竖直刚度，避免振动时发生较大变形；在楼层机械设备位置，应增加结构抗干扰能力，保证外部能量在结构内部有效传递。     

天气因素对福州地铁客流的影响分析

地铁作为一种绿色出行方式，是缓解城市交通拥堵的重要手段。地铁客流受到多种因素影响，其中天气因素变化较快，会造成地铁客流的快速变化。了解天气因素对地铁客流的影响，有助于建立相应的运输组织响应措施。本文旨在量化分析天气因素对福州地铁客流量的影响，并考虑原始天气指标的局限性，引入体现舒适度的指标。建立地铁客流与天气因素(包括气压、相对湿度、风力、降水、风寒指数等级、综合舒适度指数等级等)之间的多元线性回归模型，量化影响方向和影响程度。此外，工作日与非工作日的客流模式差异较大，将两者分别建模分析。研究发现：工作日，降水、风寒指数等级和综合舒适度指数等级对地铁客流有显著影响；非工作日，降水、气压、相对湿度、风寒指数等级和综合舒适度指数等级对地铁客流有显著影响。总体而言，非工作日地铁客流对天气因素更加敏感。