旧水泥混凝土路面注浆技术研究与实践

在水泥混凝土路面基础上加铺沥青混凝土路面时 ,对现有板块破损的处理十分关键 ,而其中又以板块的脱空处治为最。板底注浆是处理板块脱空常用且有效的方法 ,本文就注浆技术的原理、材料的选择、配比试验及施工实践等作了较详尽的介绍     

防抱制动系统基于模型的最佳滑移率计算方法

提出了一种基于μ-λ曲线的近似数学模型来实现最佳滑移率的递推最小二乘算法(RLS)。应用累积求和统计控制法(CUSUM)，解决了RLS算法在检测跃变路面时响应滞后的问题。通过计算机仿真，验证了算法在车辆防抱制动系统中的可行性和有效性。     

钢管活性粉末混凝土轴压短柱受力性能试验研究

进行22根钢管活性粉末混凝土(钢管RPC)轴压短柱试验,分析其荷载-变形曲线、破坏特征和影响极限承载力的主要因素。试验研究表明:钢管RPC轴压短柱的荷载-纵向应变曲线弹性阶段约为极限荷载的90％~95％;套箍系数ξ较小时,在达到极限荷载后承载力急剧下降;ξ较大时,在达到极限荷载后承载力下降平缓并呈回升趋势。ξ较小的试件多呈剪切破坏形态;ξ较大的试件所有断面上均被墩粗,试件的上、下两端明显局部鼓曲。构件承载力随RPC强度fc的提高而提高,两者基本成线性关系;套箍系数ξ越大,构件承载力也越大,但钢管对RPC的约束效果比对普通混凝土的差。提出的钢管RPC轴压短柱极限承载力的实用计算公式计算出的结果与试验结果吻合良好。     

压实石灰黄土压缩特性试验研究

通过击实试验，获得了不同石灰掺量石灰黄土的最大干密度和最佳含水量。通过对不同压实度、石灰掺量和龄期的压实石灰黄土进行压缩试验，得到了各参数对压缩变形的影响规律及施工中选择依据。绘制出不同压实度石灰黄土的归一化压缩曲线，从而可方便地计算不同压实度石灰黄土路基的沉降。发现侧限割线模量和压力成正比，表明侧限压缩割线模量分析法适用于压实石灰黄土。给出了计算压实石灰黄土路基沉降的3种方法。     

Fitness-for-purpose assessment of cracked offshore wind turbine monopile

In this paper, the procedure for flaw acceptability assessment is examined through a case study of a semi-elliptical surface crack in an offshore monopile as it grows till it forms a through thickness crack. Using the procedure prescribed in an industrial standard (BS 7910), the fracture ratio, K_r is shown to increase monotonically with increasing crack depth. The load ratio, L_r, is initially insensitive to the crack depth. However, there is a rapid increase in L_r when the crack depth to thickness ratio exceeds 80%. L_r values obtained from detailed 3D FE limit analysis using elastic-perfectly-plastic material behaviour do not exhibit the asymptotic behaviour predicted by BS 7910 as the flaw transitions from deep crack to through-thickness crack. Furthermore, K_r predicted by BS 7910 is shown to be an over-estimation for the typical dimensions of offshore monopiles. The findings suggest that a structure with a deep flaw may be identified as unacceptable based on BS 7910 when it may still possess a non-trivial amount of structural residual life. This is a concern for monopiles where crack growth as a large flaw forms a significant part of the total life.     

Centrifuge modelling of pipe-soil interaction in clay with crust layer

Seabed in regions, such as the Gulf of Guinea and North West Shelf of Australia, may exhibit a crust layer where the undrained shear strength can be an order of magnitude higher than that of the immediately underlying sediment. This can complicate design of steel catenary risers, where fatigue depends on the cyclic vertical stiffness of the pipe-soil interaction. Potential punch-through of the riser into the underlying soft soil may invalidate design assumptions based on the pipe-soil stiffness within the crust layer. The long-term evolution of pipe-soil stiffness within the crust layer, which exhibits similar properties to an over-consolidated soil, is also poorly understood. This paper describes centrifuge model tests undertaken in a clay sample with a crust layer, simulating the punch-through process of a pipe under load control and investigating the pipe-soil stiffness during long-term cyclic loading tests under displacement control. Results confirm that the potential for punching-through the crust layer depends strongly on the relative ratio of pipe diameter to crust layer thickness. The long-term evolution of pipe-soil stiffness showed a steady increase after an initial remoulding stage in contractile soils (normally consolidated and lightly over-consolidated), but a steady reduction in the heavily over-consolidated, more dilatant, crust. The magnitude of pipe-soil stiffness changes (during both remoulding and reconsolidation) is governed by the over-consolidation ratio of the soil and the amplitude of the cyclic displacements. This study provides insights on the relevant cyclic stiffness to consider when assessing SCR fatigue life in over-consolidated soils and soils exhibiting a superficial crust layer.     

Assessment of fatigue strength of steel butt-welded joints in as-welded condition – Alternative approaches for curve fitting and mean stress effect analysis

Experimental fatigue data for butt-welded joints in as-welded condition and under constant amplitude tensile loading (secondary bending included) were analyzed using the nominal stress system and the notch stress system. Two approaches were used; a standard fitting procedure and minimization of the sum of squared perpendicular distances from a line with a fixed and free slope. In all cases, the latter method gave better agreement between the experimental and predicted fatigue life and fatigue strength. The analyses showed both with all broken specimen data included and with reduced data that the FAT225 curve, as recommended by IIW, might be too optimistic for the notch stress approach in the case of butt-welded joints in as-welded condition. It was also found that use of the local stress ratio instead of the applied stress ratio might explain many issues concerning current observations and apparent inconsistencies in reported literature.     

混凝土在路桥桩基施工中的作用及技术

路桥桩基混凝土施工中，为了保障灌注桩混凝土的质量，必须加强对准备工作及施工工艺的重视。通过对混凝土及其施工质量要求进行分析，探讨了混凝土在路桥桩基施工中的配合比、泵送等，并阐述了路桥桩基施工技术。     

南昌红谷沉管隧道短管节干坞内拉合对接施工技术

沉管隧道最终接头短管节在牵移和拉合过程中易发生偏移与倾斜,且GINA止水带压缩到设计值难度较大。以南昌红谷沉管隧道为例,从准备、牵移、拉合及后处理4个阶段介绍短管节对接拉合施工工艺。通过对底钢板打磨、涂抹黄油等,减小底部摩擦阻力。采用计算机控制液压同步提升系统、液压数据量测、钢端壳间距测量等措施,对短管节轴线及平面控制。实践表明:GINA止水带压缩量误差仅为+4 mm,短管节轴线及平面偏差均在可控范围内,短管节干坞内拉合对接操作可行、质量可靠。