基于远、近期合建的折多山公路隧道总体设计方案研究

为解决特长公路隧道升级改造困难问题,以折多山公路隧道项目为依托,创新性地提出远、近期合建的总体设计方案。通过交通量预测、工程造价、运营通风及逃生救援等方面综合比较,得出可实施的合建方案： 先期建设二级公路隧道主洞,设2段非贯通平导,后期直接将二级公路隧道作为高速公路隧道右洞,并贯通二级公路隧道平导作为高速公路隧道左洞。合建方案能有效节约工程造价,降低社会耗能。     

垂直水幕作用下扩建地下水封油库布局方式研究

为研究垂直水幕对扩建地下水封油库布局方式的影响,以某大型地下水封洞库分期建设工程为依托,采用有限元数值模拟方法,对有、无垂直水幕条件下扩建洞库的布局方式进行研究。研究结果表明： 1）当两期洞库间距较小时,在两期洞库之间设置垂直水幕可有效削弱拟建洞库对已建洞库水封可靠性的影响,随两期洞库间距的增加,垂直水幕的影响性逐渐减弱; 2）拟建洞库轴线方向对水封可靠性的影响受地形等条件的影响较大,在两期洞库之间设置垂直水幕对水封可靠性的影响较小; 3）随拟建洞库埋深的增加,拟建洞库的水封可靠性逐渐增强,已建洞库的水封可靠性却呈逐步减小趋势,在两期洞库之间设置垂直水幕可有效减小埋深对两期洞库水封可靠性的影响。     

适于TBM施工的HSP法实时预报技术设计与实现

为实现TBM施工隧道的实时地质预报,以TBM刀盘滚刀破岩震动作为震源的HSP法地质预报技术为基础,通过分析TBM施工工艺与机身结构特点,对HSP系统硬件和软件进行优化设计,使其小型化、自动化和智能化,并搭载于TBM上进行智能控制。在TBM掘进过程中,首先,通过隧道轮廓位置的检波器连续或高频次地采集地震反射波信号; 然后,经系统软件对数据的自动处理,实时获取掌子面前方地层反射特征参数图谱; 其次,通过智能识别技术完成对不良地质反射界面的有效拾取与判识; 最后,实现不良地质的探测。通过对适于TBM施工的HSP法实时预报技术进行优化设计,实时探查前方地层不良地质(体)位置、规模与性质,为TBM的高效施工起到一定的推助作用。     

丽香铁路黄山哨隧道下穿岩堆段设计施工关键技术

以下穿岩堆段的丽香铁路黄山哨隧道为工程依托,对岩堆段地表开裂及洞内初期支护边墙严重变形的问题进行研究。地表埋设6根测斜管监测地表位移情况,洞内布置3个断面进行围岩压力、钢架内力、二次衬砌内力、初期支护与二次衬砌间的接触压力、锚杆轴力量测。在分析现场岩堆段洞内外受力机制及原因的基础上,根据数值计算结果优化二次衬砌断面型式及进一步加大二次衬砌厚度及配筋。采取以下措施控制隧道岩堆段变形： 1）地表岩堆土石接触面开裂处增设截排水措施; 2）加大隧道初期支护钢架型号及加长岩堆侧边墙径向系统锚杆; 3）加大隧道边墙轮廓曲率并优化隧道二次衬砌型式为圆顺型; 4）隧道预留变形量加大至30 cm; 5）隧道二次衬砌内净空预留50 cm补强空间; 6）隧道拱部设置42小导管超前支护。现场岩堆段采取以上措施后已顺利施工通过,根据洞内外监测结果显示,结构在安全可控范围内。     

面向智能船舶的容错卡尔曼融合估计方法

针对智能船舶多传感器系统因未知海洋环境干扰和设备间干扰等因素导致的一个或数个传感器产生随机间歇性故障从而导致融合估计结果出现偏差甚至失真的问题,设计1种基于四分位滤波的容错方法,并针对该方法导致的观测时滞问题设计1种预报方法,提前预报观测值,进而抵消容错方法导致的时滞问题。此外,针对多传感器之间的互协方差难以准确估计的问题,采用CI融合估计方法进行融合估计。为验证算法的有效性和融合估计的精度,对带有间歇性故障的两传感器系统进行仿真试验,并与按矩阵、按对角阵和按标量3种分布式融合估计方法得到的结果进行对比。4种方法的均方误差系数大小对比结果显示,对于带间歇性故障的多传感器系统,设计的融合滤波不仅具有鲁棒性,而且具有较高的融合精度。     

里海远洋渔船无人机舱系统研究

针对我国远洋渔船装备落后、操纵性差、机舱环境恶劣、电站管理水平低、劳动强度大以及渔船机舱自动化水平低等问题,介绍里海远洋渔船无人机舱系统的设计与组成。通过采用主机遥控系统、电站功率管理系统、机舱监测报警系统以及网络通信等技术,将自动化、电气化、信息化和智能化控制技术等船舶前沿科技应用于实船,构建一个满足法国船级社(BV)机舱自动化最高等级AUT-UMS要求的无人机舱系统,以提高远洋渔船的操控性、安全性和可靠性,提升供电系统自动化管理水平,改善作业人员工作环境。对该自动化系统的效果和特点进行分析,结果可为我国远洋渔船自动化系统的研究提供策略和思路。     

Locating rental stations and bikeways in a public bike system

To determine the spatial distribution of rental stations and bikeways in a public bike system, this paper proposes a facility location and network design model. The model is developed as a multi-objective programing problem that considers four objectives (minimizing cyclist risk, maximizing cyclist comfort, minimizing adverse impacts on traffic and maximizing service coverage) and multiple constraints (monetary budget, network connectivity, station spacing, bikeway types, station number and value ranges of decision variables). The ε-constraint method solves the programing problem for the public bike system in Daan District, Taipei City, Taiwan. The nine non-dominated alternatives generated are all markedly better than existing locations of rental stations and bikeways. Scenario analysis results indicate that increasing the construction budget for bikeways significantly improves cyclist safety and comfort whilst increasing the adverse impact on traffic. Planners can use this model to develop public bike systems that spatially integrate rental stations and bikeway networks.     

Analysis of the Circulation System of a Slurry Shield and the Muck Carrying Ability of a Dredging Pipe北大核心CSCD

The circulation system of a slurry shield is composed of a transportation system and a processing system.For shield construction, correct selection of the circulation system for the slurry shield is directly related to construc-tion speed. Using the Nanjing Yangtze tunnel as an example, the material balance calculation of the circulation sys-tem, sieving effect analysis, and analysis of the muck carrying ability of the dredging pipe are conducted for various strata. The practical results show that above mentioned calculations and analysis method provide a good reference for the proper selection of a slurry separation system and dredge pipe. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Assessing the impact of reduced visibility on traffic crash risk using microscopic data and surrogate safety measures

Due to the difficulty of obtaining accurate real-time visibility and vehicle based traffic data at the same time, there are only few research studies that addressed the impact of reduced visibility on traffic crash risk. This research was conducted based on a new visibility detection system by mounting visibility sensor arrays combined with adaptive learning modules to provide more accurate visibility detections. The vehicle-based detector, Wavetronix SmartSensor HD, was installed at the same place to collect traffic data. Reduced visibility due to fog were selected and analyzed by comparing them with clear cases to identify the differences based on several surrogate measures of safety under different visibility classes. Moreover, vehicles were divided into different types and the vehicles in different lanes were compared in order to identify whether the impact of reduced visibility due to fog on traffic crash risk varies depending on vehicle types and lanes. Log-Inverse Gaussian regression modeling was then applied to explore the relationship between time to collision and visibility together with other traffic parameters. Based on the accurate visibility and traffic data collected by the new visibility and traffic detection system, it was concluded that reduced visibility would significantly increase the traffic crash risk especially rear-end crashes and the impact on crash risk was different for different vehicle types and for different lanes. The results would be helpful to understand the change in traffic crash risk and crash contributing factors under fog conditions. We suggest implementing the algorithms in real-time and augmenting it with ITS measures such as VSL and DMS to reduce crash risk.