浅水波作用下护底块石对斜坡式护岸稳定性影响

在水深较小,原泥面为斜坡岩基的场区建造护岸时,应重视护底块石的设计。波浪在护底块石的上方发生破碎,卷破波对护底块体产生沿海侧方向的拖拽作用,从而导致护底块石失稳并引起护面块体的滑动。结合某护岸加固工程的方案设计和物理模型试验成果,提出在护底设计中,应结合增加护底块石质量与增大原泥面糙率两种措施制定护底块石方案;有条件时可通过增加护底长度或埋深的方式设置护底。     

高桩码头水上施工平台的设计计算

通过不同施工阶段、不同荷载形式,对高桩码头水上施工平台的主梁、次梁及牛腿等进行了受力计算,其强度、刚度及安全性能均满足规范及使用要求,保证了平台的安全性与稳定性。钢平台的搭设,确保了钻孔嵌岩灌注桩及其上部结构的顺利施工。     

区域船舶产业核心竞争力研究

基于核心竞争力理论,阐述了区域船舶产业核心竞争力的界定、特征、识别标准和方法,并以镇江地区为例,对其船舶产业核心竞争力进行了识别,为培育和提升镇江地区船舶产业核心竞争力提出了建议措施。     

三台阶核心土环形开挖法在广以隧道中的应用

三台阶核心土环形开挖法是在台阶分部法基础上演变而来的,它集中了台阶法、台阶分部法、上下导坑法等优点。广以隧道地层较老,岩石破碎、节理发育、石质较软,围岩以Ⅳ、Ⅴ及Ⅵ级为主,施工难度极大。文中介绍了三台阶核心土环形开挖法,以及与之相匹配的超前支护、初期支护、防排水及二次衬砌施工等工法。     

基于遗传算法的企业间协同制造战略伙伴选择的方法

协同制造是一种能够实现快速响应市场的生产模式,该生产模式已经成为21世纪制造业发展的必然趋势．为了实现当前制造环境下制造资源共享与优化配置,描述了企业间协同制造的基本概念,提出了协同制造任务的分配和资源发现,分析了协同制造的策略与运行模式及战略伙伴的选择,比较了几种算法的优缺点,给出了应用实例,用遗传算法对事例进行了论证并对事例进行了优化,得出了可行性的结论．     

烟台某工程循环水取、排水工程压水试验

为确定烟台某工程地基基岩的渗透特性,阐述水上岩体压水试验的主要操作过程、试验数据处理和试验结果分析评价方法．测定区域内的各岩层的透水率和渗透系数,给出不同风化程度岩层的渗透性评价,为设计提供防渗设计所需参数。     

广州地铁硬岩段土压平衡盾构掘进施工的对策

广州地铁3号线某盾构区间地质条件复杂,既有极为松软的淤泥质土、砂层,又有坚硬的微风化混合岩、辉绿岩等.分析盾构机在硬岩段掘进中刀具磨损的原因,并主要通过对盾构掘进参数设定、姿态控制、泡沫使用等方面的研究,提出在广州地区硬岩段土压平衡盾构掘进的施工措施.     

聚氨酯复合改性沥青的制备与性能研究

为改善聚氨酯(PU)改性沥青的性能,实现其在道路工程领域的应用,将PU、岩沥青(RA)和基质沥青(BA)按照自定的室内工艺流程制备得到PU复合改性沥青,并探讨了制备工艺参数的适宜性.采用针入度、软化点、延度和旋转黏度试验优化了PU和RA的掺配方案,基于胶体理论分析了PU复合改性沥青的温度敏感性;利用动态剪切流变(DSR...     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

预制桩在岩石地基中的应用

在淤泥层较厚持力层为岩石地基的地质条件下,常采用冲、钻孔灌注桩嵌岩,但在施工过程中塌方塌孔严重、安全性差,如何突破预制桩本身具有无法穿过孤石和滚石的特性,实现嵌岩是工程中需要研究的问题。结合实际工程设计与施工,根据工程地质和荷载情况,通过采用不同的桩体及桩靴形式,成功实现预制桩在岩石地基中嵌岩的目标。